1925 Tt C-cab Truck With Tilting Wood Truck Bed on 2040-cars
United States
|
This is a 1925 TT truck which was restored 2 years ago. At that time the truck had a new paint job and rear truck bed restored with new wood. It was sold to a high school friend of mine who only drove it around the block a couple of times. He no longer wants the truck and wants me to sell it for him because he doesn't know that much about Model T's. The truck runs beautifully. The engine has less than 100 hours since it was rebuilt. The magnets have been taken out and a special harmonic balancer was built on the flywheel to help take vibration out of the engine. It runs on a This is the same kind of balancer that is used on big 18 wheeler truck tires. Even with a distributor, it can start with two cranks on the hand crank. It has an electric starter as well. On the drive train, it has a Muncie transmission behind the Ford transmission giving the truck 6 speeds forward and two reverse. The transmission bands have been replaced. The TT which was notorious for slow driving speeds has a 5:1 worm drive replacing the standard 7:1 allowing the truck to drive faster and keep up with traffic. With the Muncie and the high speed rear end make a huge difference.
In addition to this, the truck has a very rare rear shock system using three springs on each shock. Two leaves have been re-arranged on the rear springs to give the truck a softer ride. It has a trailer hitch. It has Rocky Mountain brakes, Kingston carb, Chrome radiator shell, window side curtains for bad weather, New radiator. and a tilting truck bed. It also comes with a Klaxton type Oooga horn and outside rear mirror. The rear tires are old and new rear tires have been bought and with go with the truck. They have not been installed. The front tires are fine. All the wood on the wheel is in good shape. This is as good as any TT you will find. |
Ford Model T for Sale
1927 model t coupe nailhead t5 hot rat rod project 1926 28 29 30 31 32 nail head
1923 t-bucket, street rod, hot rod, pro street(US $20,000.00)
Original survivor 1927 model t roadster
Mint condition(US $12,000.00)
1926 model t roadster pickup(US $17,500.00)
1923 t-bucket(US $15,000.00)
Auto blog
William Clay Ford Sr. dead at 88
Sun, 09 Mar 2014William Clay Ford, retired vice chairman of Ford Motor Company and the last surviving grandchild of company founder Henry Ford, died this morning after a bout with pneumonia. He was 88.
Ford spent 57 years with his grandfather's company, joining the board of directors in 1948 before graduating from college. Ford also held a position as chairman of the design committee, as well as the chairman of the executive committee and vice chairman of the Board of Directors during his tenure with the company. In a 2013 Detroit Free Press story, retired CFO Allan Gilmour said Ford had an eye for design, and was once able to pick out when a fiberglass model of a Ford Contour was asymmetrical, off by an inch on one side. He retired and assumed the position of director emeritus in 2005.
"My father was a great business leader and humanitarian who dedicated his life to the company and the community," said Bill Ford, Jr., Ford's current executive chairman. "He also was a wonderful family man, a loving husband, father, grandfather and great-grandfather. He will be greatly missed by everyone who knew him, yet he will continue to inspire us all."
Ford recalling 126,000 Fusions and Milans over wheel separation concern
Fri, 09 Dec 2011Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.
Experts wonder if aluminum F-150 gives Ford a real advantage
Mon, 17 Mar 2014There's no doubt that Ford is taking a risk in producing the body of its upcoming new F-150 pickup truck in aluminum. What is up for debate, however, is whether aluminum was a wise risk to take in the first place. Wards Auto took the opportunity to poll some experts on the subject of aluminum versus steel in the automotive sector, with somewhat unsurprising results.
Richard Schultz, a project consultant at Ducker Worldwide, which bills itself as "a leading aluminum industry consultant (though they also deal in steels), suggests that the potential drawbacks to aluminum - higher costs, lower supply - aren't really impediments to the auto industry's increased acceptance of the lightweight metal.
Similarly, Randall Scheps, global automotive marketing director for Alcoa, a massive aluminum producer, counters claims that aluminum is less safe for vehicle occupants, suggesting that the use of aluminum can actually increase safety as it could potentially allow for larger vehicles with more crush space than steel.