1931 Model A Ford 2 Door Sedan on 2040-cars
El Paso, Texas, United States
1931 Model A Ford in what I consider great condition. This car is 83 years old and has been restored about five years ago. Fun to drive and runs great and starts every time with either starter or crank. There is some wear on the seats from big children getting in and out of the back seat. Has the original oil slinger which present day was replaced with the rear main seal. Some oil leakage as was designed to do. Has the original color scheme of brown body and black fenders and top. It is a Bonnie and Clyde style 2 door sedan. This car has great paint and only has one small scratch on drivers side behind rear side window, not a dent. Also a tear of about 2 and one half inches in front passenger side fender. don't know how this happened since there is no rust on this car. Radiator and hoses are sound. All glass is good. Tires and wheels are in good condition. All original except the 6 volt alternator I had built to maintain today's batteries. This car was completely restored by my good friend who has done others and is one of the best.
I am the first owner since his restoration. Shipping and delivery will be done by the buyer after sale is completed and money has changed hands. |
Ford Model A for Sale
- 1928 ford model a sedan hot rod 350 v8 chevy engine 350 turbo trans(US $28,995.00)
- All steel slant window modified for touring with rare metal clam shell trunk
- 1929 ford model a roadster shay
- 1930 ford model a street rod hot rod rat rod
- 1929 ford model a rat rod, hot rod
- 29 ford, roadster, red hot, excellant condition(US $29,500.00)
Auto Services in Texas
Zoil Lube ★★★★★
Young Chevrolet ★★★★★
Yhs Automotive Service Center ★★★★★
Woodlake Motors ★★★★★
Winwood Motor Co ★★★★★
Wayne`s Car Care Inc ★★★★★
Auto blog
Ford builds Lightweight Concept with Fusion shell [w/video]
Wed, 04 Jun 2014It's a fairly well known fact that removing weight from a car is essentially a panacea for many of the modern automobiles problems. Does it handle like crap? Remove weight. Underpowered? Don't add power; trim the fat. Need to improve fuel economy? It's diet time.
Actually executing a major weight reduction program, though, much like with human beings, is no easy task. Unlike you or I, where motivation is the issue, the prohibitive measure in trimming a car's waistline is money. Lightweight materials are expensive, with carbon fiber and carbon-fiber reinforced plastic still primarily in the domain of higher end vehicles. Even aluminum construction, pioneered on a mass-produced level by Audi and Jaguar, is only now starting to make its way into the mainstream, thanks to the upcoming Ford F-150.
With this concept, though, Ford is attempting to show that a mass-produced, lightweight vehicle isn't too far off. This is the Lightweight Concept, and while it may look like a Fusion, it weighs as much as a Fiesta. For reference, the lightest Fusion available to the public is the 3,323-pound, 2.5-liter model with a manual transmission. A manually equipped, 1.6-liter Fiesta, meanwhile, is just 2,537 pounds.
Watch Tanner Foust hustle the Fiesta ST 'round the 'Ring
Mon, 15 Jul 2013The last time we saw Tanner Foust at the Nürburgring he was sloshing an SVT Raptor from kerb to kerb. Sticking with Ford but swapping keys, this time the drift champion and Top Gear USA host goes to the opposite end of the manufacturer's tuner garage and plucks a Fiesta ST for 'Ring duty.
The 179-horsepower front-wheel-driver acquits itself well by the end of the video. But be warned, Foust doesn't set a 'Ring time and it's shot like a commercial... because that's what it is. Still, you can enjoy all two minutes and 31 seconds of it below.
Next SVT Mustang may axe Shelby name, go naturally aspirated
Mon, 10 Jun 2013Following our first glimpse at the 2015 Ford Mustang out on the road, the fine folks at Road and Track have divulged some details on what the Blue Oval's next pony might have in store. We've already seen that the car will get some very sleek, Evos-inspired design cues, and an independent rear suspension is indeed in store. These new details, however, concern the muscle car's beating heart.
For starters, the base Ford coupe is expected to carry on with V6 power, likely from the same 3.7-liter unit found in today's car. From there, R&T says the next step up will be a four-cylinder EcoBoost engine, likely displacing 2.3 liters, putting out as much as 350 horsepower. Of course, a Mustang wouldn't be a Mustang without V8 thrust, and R&T states that the 5.0-liter Coyote V8 will continue on into the 2015 car, making something like 450 horsepower.
But it's at the high end of the Mustang range where things will, reportedly, get very, very interesting. Road & Track claims that the top-shelf 'Stang will likely lose the supercharger from its engine, producing a metric crap-ton of naturally aspirated grunt instead. Additionally, the SVT-fettled Mustang will likely be dropping its Shelby moniker, in favor of "a name you're familiar with," according to the magazine (you know, like, Cobra).