1930 Ford Model A Tudor Sedan Project on 2040-cars
Champlin, Minnesota, United States
|
I do not have the storage capabilities to keep my A protected from the winter this year so here it is! I bought it as a stalled project from the previous owner. My plan was to set the body on a Av8 chassis that I have been working on. Life happens so my plans have been stalled for the time being. I know Henry made a million of them but ripping apart a fairly complete car is hard for me to do. I will not say this is a rust free car but the rust [surface rust] looks to be concentrated to the underside of the car. As you walk around the car there is no apparent rust through on the body. The paint is very presentable. The running boards are the only part of the car that I found rust out. The fenders do have a few bumps and bruises along with a few stress cracks normal for a 84 year old Model A. The bottoms of the rear fenders were tweaked while being loaded or unloaded off a trailer on one of the trips made to have the car inspected by the MN DMV so the lost title could be reissued. I do have a clear title for the car issued in 2012. There is a marking on the title that the title is a bonded title. The top had been replaced late in the cars life and looks very nice. The interior looks to be all there. It has the rear bench seat and front buckets that are dirty and stained. I believe all the original pieces for the floor are there. The glass is all intact but there are some cracks in some of the glass. The doors open and close like new. The tires look to have very few miles on them. They are old and have been sitting and at least one of the tubes has a slow leak so that tire likes to go flat. The prior owner removed and had the original engine rebuilt and put back in place. That is where the project stalled. The radiator and grill shell were never put back into place and the engine was never fired up. The prior owner had the car since 2002 so that work was completed between then and in 2012 when I purchased the car. I have never looked into the engine any further because I was not planning on keeping the original chassis for my project. I will help with your shipping logistics as well as I can. My schedule is free most any evening [Monday to Saturday] but daytime hours are very limited. I may be able to assist with delivery within an hour of Minneapolis. Please ask questions...
|
Ford Model A for Sale
1929 ford hot rod
1931 ford model a pick up!!!
1929 ford 2 door tub, street rod, convertible
1929 ford 4 door sedan
1929 model a hillbilly 2-door loaded
Truck is amazing restored 1929 ford model a truck convertible v-8 auto pristineAuto Services in Minnesota
Wholesale Auto Repair ★★★★★
Wayzata Nissan ★★★★★
Walters Rebuilders ★★★★★
Tousley Ford ★★★★★
Tom`s Radiator Repair ★★★★★
Tire Associates Warehouse ★★★★★
Auto blog
Ford readying 2015 F-150 drift truck for SEMA
Sun, 19 Oct 2014Between the Mustangs you'd find in Formula D and the Fiestas in the Global and World rallycross championships, there's no shortage of Ford drift cars on the scene. But at the upcoming SEMA Show in Las Vegas, the Blue Oval automaker intends to show off a different kind of drift machine.
Created in collaboration with driftmeister Vaughn Gittin, Jr., this custom F-150 has been designed for "on- and off-road capabilities, as well as drifting and jumping." It's got a suspension with components from Kibbetech King and Air Lift Performance to give it 12 inches of travel and comes packed with 5 Recaro seats. Other details remain limited, but if the rendering above is anything to go by, it ought to be pretty awesome.
Alongside the Gittin truck, Ford will also be showcasing another F-150 designed together with freestyle motorcross rider Brian Deegan, packing the 3.5-liter EcoBoost engine and a long list of enhancements. Between these two trucks, Ford hopes to extend its winning streak for the Hottest Truck award that it's taken four years running now. Feel free to read more in the press release below.
Ford gives police chiefs tech to surveil officers in their own cars
Tue, 28 Oct 2014Police officers certainly have a difficult job in keeping the streets safe, but as public employees in positions of authority, there is still a very real need for oversight. To that end, Ford is partnering with a tech company to offer a new system called Ford Telematics for Law Enforcement on its line of Police Interceptor patrol vehicles that could make cops safer, while giving cities a better idea of what its officers are doing.
The system streams live data about cruisers back to the home base to people like the police chief or shift supervisor. That info includes expected things like speed, location and cornering acceleration, but it gets incredibly granular as well, with records of things like if emergency lights are on, or even if an officer is wearing a seatbelt.
Ford Telematics for Law Enforcement "ought to protect officers as much as it protects the public," said Ford spokesperson Chris Terry to Autoblog. Constantly monitoring patrol cars offers cities a lot of advantages, too. First, it reduces potential liability because a department can prove where each vehicle is at all times. Also, officers know they are being watched and may potentially drive more safely.
Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day
Thu, 13 Feb 2014Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.