1930 Ford Model A Tudor on 2040-cars
Saint Paul, Minnesota, United States
Body Type:Tudor
Engine:4 cylinder
Fuel Type:Gasoline
For Sale By:Owner
Vehicle Title:Clear
Exterior Color: Black
Make: Ford
Number of Cylinders: 4
Model: Model A
Trim: Normal
Drive Type: Standard Transmission
Mileage: 999,999
Warranty: Vehicle does NOT have an existing warranty
Sub Model: Tudor
I am selling this 1930 Model A Tudor that I purchased from the heirs of a fellow who had died. I'm inclined to call it "barn fresh" but cannot as some restoration has been done on it. It has very nice sheet metal which makes it a good potential for restoration. You may not have to buy any sheet metal for it, but that is your decision. I, personally, would buy only new running boards/splash aprons for it. I would use all the rest of it - including the extra front passenger fender that I am including with it.
Following are my visual observations of it:
---Hood - nice, but two very small dents on one side which can be filled with body filler. The louvers are nice.
---Fenders - there are none of the "normal" breaks found on most original fenders, that normally require a weld. The drivers front fender, and both rear fenders are solid with some small denting. The passenger side front fender is pretty bad
so I will send another, much nicer fender with the car.
---Cowl - on the drivers side there is some rust out, which you can buy a patch for, or do what I have done, which is cover it with fiberglass (6 years ago-still nice and not noticeable) (see picture). Also 2 holes drilled - antenna??? Passenger
side is good.
---Doors - drivers side is good, no rust thru or holes on bottom. Passenger side has some rust thru on lower outside, but not on door bottom. Can buy patch for it or fix with fiberglass.
---Body - behind doors (both sides) and around the back - looks fine.
---Body frame - this part of a car, if it is rusted out, is difficult to fix. On this car, except for one place (the short 45 degree piece by the clutch pedal), this body frame is strong and looks fine. You can replace this one piece if you wish, but I
don't feel it is necessary as body frame is strong and this piece is covered by the floor mat.
---Gas tank - looks fine.
---Windshield frame - what I can see and feel look fine.
---Glass -- back window and 3 side windows look fine, one side window has a crack in it.
---Windshield - there is some separation between the pieces so it should be replaced, especially with safety glass so one doesn't severely hurt themselves in an accident.
---Roof -- a limb fell on it and dented it..
---Interior wood - Looks like it may have been replaced because it appears solid,, except for the piece over the windshield which perhaps should be replaced. The roof bows and chicken wire in the roof all look good as if they have been
replaced.
---Dash = is complete but rusted. The speedo reads 10,100 miles - original ????
---Floor boards - basically useable and solid, except for the piece in the back seat foot rest, which has a few soft spots which may or may not need replacing.
---Radiator - looks good, in fact it is an ORIGINAL which is unusual to find one still in use - maybe the mileage is correct???
---Radiator shield - very nice.
---Lights - nice buckets but seal beams. All original internal parts are available from vendors (repro parts which are fine). One tail light is present.
---Tires - four (4) NEW tires on the car.
---Horn - one present but not original Model A type.
---Wiper - original vacuum type Model A style.
---Steering wheel - not bad, is restorable.
---Interior moldings --side windows and back window are present.
---Handles - missing one door handle.
---Firewall - decent with couple of extra drilled holes, and larger hole for heater manifold plus one extra approx. 2" hole
---Motor - stuck but complete with generator, starter, water pump, coil, carburetor.. No restoration here that I can see.
---Chassis - complete with differential, tranny, clutch housing, and frame. But no visible restoration done on it.
---Title -none, heirs were unable to locate it.\
---Running Boards - solid, no rust thru, but horizontal parts (that you step on) are welded on plates. This will require
you do drill holes in them for bolts to fasten them to frame braces/ You can still cover these with normal rubber covers
but there would be small bumps in the rubber where the bold heads are.
---Seats - front seat frames present and look okay, rear seat wooden frames also present and look fine. Some springs are present, but I wouldn't use them.
This car is the basis for a nice restoration because the sheet metal is in such good condition. The mechanical parts are such that
a "Sunday mechanic" can do much of his own work, especially with the number of restore/repair manuals available.
THERE IS NO TITLE TO THIS CAR. THE HEIRS OF THE OWNER COULD NOT LOCATE IT. I HAD TO FILL IN THE TITLE BLANK IN ORDER TO LIST IT. IN MY PERSONAL PAST, I HAVE HAD A TITLE CREATED FOR A CAR I HAD PURCHASED, SO I KNOW IT CAN BE READILY DONE. PLEASE DON'T LET THIS FACT DETRACT FROM YOUR PURCHASE OF THIS CAR, BECAUSE YOU WILL BE ABLE TO HAVE A TITLE CREATED. I wanted to put "No title" in the title spot, but it wasn't allowed.
---
Ford Model A for Sale
1929 ford model a rumble seat roadster - convertible - excellent
1930 ford model a body rat rod / hot rod
1931 ford model a highboy(US $24,000.00)
1930 ford model a 2-door sedan
1929 ford sedan ratrod very nice and professionally built 350 v8 350 trans look
1929 ford tudor sedan hotrod/scta/hopup(US $12,500.00)
Auto Services in Minnesota
Victory Auto Service & Glass ★★★★★
Victory Auto Service & Glass ★★★★★
Trevis Transmission ★★★★★
T & M Towing & Snow Plowing, Inc. ★★★★★
S & T Auto Repair ★★★★★
Rising Star Auto Sales ★★★★★
Auto blog
Jaguar design boss admits X-Type was a mistake
Thu, 19 Sep 2013History has a way of repeating itself, especially in the auto industry. When Jaguar was owned by Ford, the British brand attempted to field a competitor for the BMW 3 Series, called the X-Type. Based on the bones of a Ford Mondeo, it aped the styling of Jaguar's flagship model, the XJ, while borrowing liberally from the Ford parts bin. That was 2001.
Now, in 2013, Jaguar is planning a new 3 Series challenger based on the platform previewed by the C-X17 Concept, while Ford is attempting to take the latest Mondeo upmarket. The moves have both brands recognizing where, why, and how the X-Type failed. "It didn't look mature or powerful or anything. It was just a car," Jaguar's current head of advanced design, Julian Thomson, told PistonHeads. Basing the X-Type on a front-drive car while giving it styling that was meant for a rear-driver lead to proportions that "were plainly wrong," Thomson told PH. Ford's European head of quality, Gunnar Herrmann, added that the X-Type was "a fake Jaguar, because every piece I touch is Ford."
For what it's worth, the X-Type's successor in the segment will sport rear-drive, with plenty of input from Ian Callum. Thomson described the new model, which would challenge the 3 Series as having, "Big wheels right to the ends of the car, low bonnet, short overhangs, very low cabins." Sounds good to us.
Social media star Scott Monty leaves Ford
Thu, 22 May 2014It seems weird to think that an automaker could have a social media star, but Ford does. Or at least it did. Scott Monty, its Global Digital Communications Manager, led the company's team for almost six years and forged a reputation as being one of the most talented people in corporate social media. But the guru recently announced that he would be leaving the automaker for an undisclosed job elsewhere.
"I just decided the time was right. I am going to take a little time with my family, and I am going to start on a new adventure pretty soon," said Monty in an interview with AdWeek. He also explained a little about his theory of how companies should use social media. In his opinion, it should be a chance to go beyond standard marketing and build a relationship with people. Businesses need to have a broad focus for its online message, and using just one service isn't enough to be successful.
Under his guidance, Ford expanded its Facebook presence significantly. According to AdWeek, it launched the 2010 Explorer on the popular site. Also, when the company wanted to investigate selling electric models, it initially gauged the public's reaction on Facebook and then advertised them there first. Monty has been a major supporter of Twitter as well to broaden the company's communication with the public.
Ford Fiesta 1.0L EcoBoost sales robust in early going
Tue, 13 May 2014Okay, okay, okay, so I was just a smidge wrong. Those that read my review of the Ford Fiesta with the new 1.0-liter, EcoBoost engine will know that while I really enjoyed the torquey little three-cylinder, I was concerned that Ford's decision to force 1.0-liter owners into a manual transmission, steel wheels and one trim level might hurt sales of the new engine. I was also concerned that the promised 45-mile-per-gallon highway rating wouldn't be enough to tempt buyers into trying an engine that's so far outside of what the general public is use to. My concerns, though, seem to have been for naught.
While not doing a booming business on the triple-equipped Fiesta, Ford is seeing a take rate of four to eight percent per month in the engine's first few months on sale. Now, four to eight percent might not sound like a lot - if, like last year, the Fiesta sells around 71,000 units, there'd be barely 5,600 1.0-liter models on the road. It is also small potatoes relative to the take rate on EcoBoost-equipped vehicles across the Ford range, which US sales analyst Erich Merkle estimates to be roughly 35 to 40 percent of retail sales. Still, according to The Detroit News, the 1.0-liter is getting adopted at roughly the same rate as the sparkling Fiesta ST, which should be a solid indication of just how well this little engine is doing.
The 1.0-liter's success "really speaks volumes, not just to what we're doing with the Fiesta, but with EcoBoost in general," Merkle told Autoblog.