Find or Sell Used Cars, Trucks, and SUVs in USA

1930 Ford Model A Deluxe Coupe on 2040-cars

Year:1930 Mileage:12800
Location:

Conroe, Texas, United States

Conroe, Texas, United States

Up for sale is a beautiful 1930 Ford Model A Deluxe Coupe that had a professional body off restoration.   It has a rumble seat, stone guard, Quail Radiator Cap. The body is perfect in every way showing no signs of repairs and is straight as an arrow. The body and door fit all around is excellent the way you want to see it. The paint finish is good with the authentic colors of Andalusite Blue for the body with  a French Gray pin stripe and Black fenders, splash aprons and wheels as per factory standards. 

The interior is done in the deluxe brown mohair by LeBaron Bonney including the carpet and headliner. All the window moldings and dash are the proper wood grain.  The rumble seat by LeBaron Bonney is brown Leatherette. 

The tires are the correct Goodyear Diamond tread black walls. The underside of this car is clean and rust free.  Everything works in the car.  The car drives better than most and is a pleasure and has a wonderful transmission as well.   Successfully competed a 4,200 mile trip to the MAFCA Blue Ridge Parkway National Tour and then to the Grand Opening of the Model A Museum in Hickory Corners, MI in May 2013.

To sum it up, this is a great classic car that you will be able to enjoy driving for years to come.

Here are the highlights;

Original superb rebuilt engine that is smoke, leak and strange noise free

Inserts, lightened fly wheel, balanced crank shaft 

12 volt system

Logo Lite directional signals

Rust free body and frame 

Straight frame

Good glass

LeBaron Bonney interior

Brand new LeBaron Bonney carpet

Nice wood floor 

LizardSkin® Ceramic Insulation for heat control

Goodyear Diamond Tread tires with good tread

Excellent wire wheels

New Interstate battery

New Robert Ruppert stainless steel leakless water pump

Recently boiled out radiator

New points, condenser and coil

Rebuilt Zenith carburetor

Quail radiator cap

Superb driver with great brakes and steering

Good paint and bright metal, ready for local shows!

No door sag

No Rot or Rust   

California Car Cover included

Vin/Engine number matches the Title 

Clear Texas title in hand


Auto Services in Texas

Zeke`s Inspections Plus ★★★★★

Automobile Parts & Supplies, Battery Storage, Battery Supplies
Address: 1006 S Frazier St, Hufsmith
Phone: (936) 441-3500

Value Import ★★★★★

Used Car Dealers
Address: 1210 N Wayside Dr, Winchester
Phone: (866) 595-6470

USA Car Care ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: 202 Cypresswood Dr, Klein
Phone: (281) 355-5800

USA Auto ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Body Repairing & Painting
Address: 12113 Garland Rd, Rowlett
Phone: (972) 247-4098

Uresti Jesse Camper Sales ★★★★★

Automobile Parts & Supplies, Truck Accessories, Transport Trailers
Address: 13070 Interstate 35 S, Atascosa
Phone: (210) 623-2411

Universal Village Auto Inc ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 6223 Richmond Ave, West-University-Place
Phone: (832) 320-9600

Auto blog

2015 Ford F-150 shaves 700 pounds, adds 2.7-liter EcoBoost [w/video]

Mon, 13 Jan 2014

The Ford F-150 is one of the best selling vehicles on the planet. Considering that, one can imagine that when it comes time for a redesign, there are hardly any half measures. For its lucky thirteenth generation, Ford has gone all-in on the single most important vehicle in its portfolio, redesigning it from the ground up.
The big news is the F-150's new, lightweight, Atlas-inspired body. Ninety-three percent of that new body is made from a sort of aluminum alloy not unlike what the US military uses in its M2 Bradley fighting vehicles and Humvees, and it accounts for up to 70 percent of the F-150's 700-pound weight reduction. As a side benefit, the aluminum body should prove more resistant to dents and dings. Built Ford tough, indeed.
If you're wondering where the other 30 percent of that 700-pound weight loss went, 8.5 percent (60 pounds) came from the increased use of high-strength steel (up from 23 percent to 77 percent) in its ladder-box frame. Ford claims this steel is comparable to some of the heavy duty pickups used by its competitors, with a PSI rating of 70,000.

2015 Ford F-150 spied in the rain

Mon, 10 Jun 2013

Standing as quite a contrast from the spy shots of the 2015 Ford Mustang we saw earlier today, our spies also sent along these pictures of the next-generation F-150 pickup out testing in its (heavily camouflaged) full prototype body. Much of the new truck's design is hidden under the bulky coveralls, but we expect a lot of its new lines to be inspired by the Atlas concept that debuted at the 2013 Detroit Auto Show.
Perhaps the biggest unknown surrounding the new F-150 is what, exactly, its body will be made of. Earlier reports have suggested that lightweight aluminum materials may be used throughout, offering a serious reduction in weight versus previous models. But Ford engineers will need to be careful, though, as they need to keep a tight rein on costs while preserving class-competitive (if not class-leading) towing and payload capacity.
On the powertrain front, the new F-150 will undoubtedly carry on with EcoBoost engines, and we'd bet on a normally aspirated V8 as well. A diesel option hasn't been confirmed, but we wouldn't be surprised to see one some time in the truck's lifecycle. Mum's the word on when the production F-150 will be revealed, but our best guess is that we'll see it at the 2014 Detroit Auto Show.

Ford Mustang GT350 drops some camo

Mon, 03 Feb 2014

Now that we've poured over the 2015 Ford Mustang in its standard form, it's time to look ahead. We already knew (and heard - literally) that Ford was working on a higher-performance version of its 'Stang to replace the Shelby GT500, and earlier reports have stated that it will simply be called the GT350.
We don't have a ton of detail to go on, but this latest set of spy photos clearly shows a hood-mounted air scoop, which suggests a forced-induction powerplant is under the hood. However, this disagrees with earlier reports that the GT350 will be all motor, using a naturally aspirated engine to send massive horsepower to the rear wheels. Our spies also point out the functional vent aft of the front wheels to allow for better airflow, and the massive quad exhaust pipes can be seen, clear as day.
Expect to see the Mustang GT350 in April, when it debuts at the New York Auto Show in conjunction with the Pony's 50th anniversary. In the meantime, have a look at our gallery above to see the latest shots of the hot Mustang out testing.