1930 Ford Model A 5 Window Coupe on 2040-cars
Dania, Florida, United States
|
This Model A Ford has been with the same family for over 52 years. Originally acquired and restored around 1963 in Long Beach California by a USN Captain who was stationed there. All work was performed by the Captain save for the paint that was contracted locally and the interior that was sewn South of the Border in Tijuana. The car was stored covered in a Southern California shed until 1992 when it was rediscovered by the son (he is pictured with the chassis) who had it transported to his residence in South Florida where it remained in storage until late 2013 when it was pulled out of storage and professionally revived.
Recent work to get the "A" back on the road was a $3500.00 investment, and included the following:
Car is a great driver, always starts, engine sounds great and everything works. Now, it's not perfect the paint is 50 years old and shows it in spots but, it's a solid and complete car that you could drive today or use as the basis for a restoration. Tires are still round, hold air and show some signs dry rot but are also 40-50 years old; they are 6.00-16 Historical documentation to accompany the car. The car has a California "pink slip" but a current Florida title is being procured for purpose of the sale. Assistance with Local, National, or International shipping is available. |
Ford Model A for Sale
1928, chevy small block, automatic, posi rear end, super nice driving!
1928 ford model a rumble seat coupe flathead v8 hotrod neat
1931 model a 5 window coupe great driver
1931 ford model a truck hot rod
1930 model a ford coupe
Ford: model a roadsterAuto Services in Florida
Yesterday`s Speed & Custom ★★★★★
Wills Starter Svc ★★★★★
WestPalmTires.com ★★★★★
West Coast Wheel Alignment ★★★★★
Wagen Werks ★★★★★
Villafane Auto Body ★★★★★
Auto blog
Ford EcoSport Storm concept swallows a Raptor in Sao Paulo
Sun, 02 Nov 2014Ford rolled into the Sao Paulo Motor Show with some pretty cool crossovers in tow, the awesomest of all being the EcoSport Storm concept shown above, which draws its inspiration directly from the F-150 SVT Raptor. It packs a lower grille clearly derived from the now-famous muscle truck, as well as a Blue Storm paint job, black and silver trim, special graphics, lower body cladding and 215/75 R15 off-road tires. Don't go holding your breath for a supercharged V8, though; made locally in Brazil, India and Thailand, the tiny EcoSport is typically powered by a three- or four-cylinder engine.
The Storm isn't the only specially prepared Ecosport on show, however, joined as it is by another pair called Beauty and the Beast. Beauty is decked out in matte copper with a black roof, LED fog lamps, 18-inch wheels with low-profile tires and an interior complete with four individual bucket seats, leather upholstery and a full multimedia suite. The Beast, meanwhile, takes a sportier approach with a white pearl finish, blue and orange trim and three-bar grille. It also wears 18-inch wheels and LED fog lamps, but its interior swaps out its rear seats for a bike rack.
Joining the EcoSport show cars was an Edge crossover equipped with all the latest technologies and done up in bright red with three-bar grille, bulging hood, and an interior featuring 10-inch touchscreens and leather upholstery. Feel free to read more in the press release below.
2015 F-150 launch to curb Ford profits?
Thu, 30 Jan 2014Ford is making a big bet on aluminum with its new 2015 F-150, and it's possible that the decision will hurt the company financially, at least in the short term. After earning a record $8.6 billion in 2013, the Blue Oval does not expect to set another record in 2014. According to Automotive News, that's "largely attributable to F Series," says Bob Shanks, Ford's Chief Financial Officer.
To retool for the new F-150, Ford will idle its Dearborn Truck Plant in Michigan for 11 weeks and the Ford Kansas City Assembly Plant in Missouri for 2 weeks. "3 of the 13 overall weeks occur during what normally is our summer shutdown timeframe," said Mike Levine, Ford Trucks Communication Manager, in an email to Autoblog. The extra 10 weeks will be preparing for the more aluminum-intensive construction for the trucks and will mean over 2 months of no F-150s being made. For comparison's sake, Chrysler boss Sergio Marchionne just confirmed that the 200 plant in Sterling Heights, MI will be down for 30 days to retool for the new model, but obviously there are many more F-150 production variables than for the midsize sedan.
Levine notes that Ford is already running three shifts at both plants, and says the automaker has plans to ensure that there is adequate supply of the full-size pickups during the retooling process. The company does not want to suffer a shortage of the vehicle that accounted for 31-percent of its 2013 US sales and an even bigger percentage of its profits.
Americans will get a four-cylinder Ford Mustang after all? [w/poll]
Sat, 09 Mar 2013Ask and you shall receive. Remember that previous report suggesting that the 2015 Ford Mustang getting a four-cylinder EcoBoost engine, and that it would be sold in Europe only and not the United States? Well, according to Road & Track, the rumor is only partially true - The Mustang will get the engine, but it is indeed coming to America.
Additionally, according to RT, the 3.7-liter V6 will continue to serve as the base engine, and since it offers up a stout 305 horsepower in its current form, it's likely that the 2.3-liter four-cylinder EcoBoost will produce a bit more than that. At the top of the range, the Mustang GT will continue to soldier on with a V8 engine, which should continue to send over 400 horsepower to the rear wheels.
Finally, while we agree 100 percent with RT's heartfelt request for a paddle-shift automatic, we certainly expect that the EcoBoost 'Stang will be offered with a manual transmission as standard equipment. This is a Mustang, after all...