Find or Sell Used Cars, Trucks, and SUVs in USA

1929 Ford Tudor 2 Door Custom Street Rod W Everything Done! This Is The One! on 2040-cars

Year:1929 Mileage:15999
Location:

Los Angeles, California, United States

Los Angeles, California, United States

 It has come time to sell my baby.  I know I will regret it one day very soon, but I have bought another rod and its time to say good bye. So, here we go...

This is a 1929 Ford Model A Tudor w Henry Ford Steel body that was professionally built by a rod shop for an entertainment big wig out here in LA about 10 years ago.  Absolutely everything, and I do mean everything was done to this car, and done right.  This is why I originally bought it.....its all DONE.  It was done in true Hot Rod style and it was done right.  The last owner cruised it for 8 years, and then I bought it 2 years ago.  It has done nothing but run like a top.  Her name is the Fireball and she's been my Sunday car for the past couple years.  Here is the long list of mods & improvements....

1932 Grill up front to give it that unmistakable deuce iconic look.  The Henry Steel sits on a TCI frame with Mustang 2 front suspension w coil over shocks on all 4 corners.  The car sits low and has a really nice rake to it with 14" American Racing TTII polished wheels & BFGs w white lettering out in front and the same but 15" out in the back.  Its look and rake is perfect and its low, but still a very nice ride, corners like a roadster, has low center of gravity, and the driver side tire can rub a bit when fully turning left but that comes w the territory in a lowered rod, and of course its rough on bumpy roads, but smooth as silk on good flat roads.  Its got the full fat fender look which I think is awesome.  This car drives straight, and brakes straight.  It hugs the road, moves when you hit the gas, and feels solid when you drive it.

The engine is a high performance Chevy 350 installed 3 years ago with a loopy cam and high compression which is awesome in this little light car.  Its got a Holly carb w polished intake manifold and headers, along with chrome accessories and air filter.  The exhaust goes thru rod mufflers all the way to the back where its dumped by twin chrome tips for a great sound.  This car sounds bad ass when its running.  When you start it, people KNOW its a real hot rod with that classic bah-bah-bah-bah-bah engine sound.  Its got a turbo TH350 automatic transmission with a floor shift that shifts crisp and had a full tranny service 130 miles ago so you're running nice red fluid.  The power goes back to your Ford 9" rear end with the perfect gears for cruising.  I recently put a new battery in it which is under the rear seat.  Its steered by a new chrome tilt column and a billet style steering wheel, and even for a big fella like me, 6'1' and 205lbs, its still comfortable as you can tilt the billet steering wheel out of your lap, and of course hang out the window.  This car runs at 180 degrees and has never overheated.  I live at the top of a big hill so there's the proof it runs cool up the hill every week.

The paint is about 10 years old I think and its not perfect.  Its pretty good, but it has some chips, peels, cracks here and there with some surface rust where those chips are (see pics).  There is no other rust on this car that I have seen.  This was the type of project that probably was sandblasted down to the metal before even starting, so I don't think anything was covered up.  I actually liked the few chips here and there, because it lets you know its a rod, its driven, and its not a trailer queen.  The painted fire down the side is awesome and this car gets just as many looks and thumbs up and head nods as you would think, everywhere you go. 

The doors are both shaved and both sides have door poppers with a foot button under the running board on both side which is really cool because you walk up to the car, lift your foot, and the door pops open.  Poppers, as always, can sometime need grease, or be testy, but work perfect 95% of the time.  All the glass is good and all 4 side windows roll up and down, the windshield hinges out and locks, which is awesome for cruising and the rear glass is fixed.  The rear 3 windows have cool dark limo style tint so you can't really see whats in the back.  The big chrome headlights have the orange blinkers inside them which is cool, and the tear drop tail lights were smoothed into the rear bumper for a finished look along with a 3rd brake light for modern safety.  All lights and blinkers work, and when you turn on your lights at night, there's green ground effects for some extra fun.  The top was done in a custom black canvas to give it a great custom look.  When it was shipped at some point, it looks like motor oil dripped onto it in one spot. Its hard to see unless you look, and you could likely steam clean it out w some degreaser, I've just been lazy.  It has a classic old "baa-oooga" type horn which is awesome but the contact in the steering wheel is funky, and it only works sometimes when you're making a turn and you hit it.

Interior is all new grey and black tweed with full back seat and reclining buckets up front.  It has a Vintage Air conditioning system, but it does not blow cold.  I never had time to take it to get fixed, but its all there, all hooked up, high quality system and probably just needs a charge.  The heater works great for chilly nites and is fun to cruise with the windows down and the heater on with your lady.  I put lap belts in all 4 seats so the kids can cruise with you safely.  The car has an Alpine stereo w removable faceplate which has XM radio, plays CDS, and DVDs can play on the fold down television in the back.  Yes, you ready that correctly, which is great for the kids.  There is an amplifier under the seat along with speakers in each door, and a custom speaker box in the back that goes where the kids feet would normally go.  Its sounds great, and cranks pretty loud.  There is also a display screen on dashboard but I've never been able to use it, it needs some code or something.    The gauges are Auto meter vintage style instruments and they all work.  A couple of the A/C heat buttons are missing, but that's just an opportunity to put some skulls on them. 

I wanted to give this car a bit more vintage authenticity and coolness so I added real 1929 license plates that were professionally restored and cleared with California DMV.  They were not cheap, and they look amazing, and the car is actually licensed and registered under those plates.  I took the front one off as I was going to fab a custom bracket instead of clamp it to the chrome bar, but never got the chance.  I have it and its in perfect condition. 

The car is done, its awesome, and its ready for its new owner.  I've had it 2 years and driven it only 500 miles on Sundays with the kids.  I have a new hot rod and so this one must go.  If you are looking for a rod to tinker on, and cruise with no problems, with ALL the big money already spent, this is it.  Literally, everything is done on this, other than whatever customizations you might personally like.  You can start and drive this anywhere.  The original owner of this spent a GRIP building this car, and the opportunity to get such a great car for a fraction of what he paid is a pretty rad opportunity that I had to wait for about 3 years searching on ebay to find this one, and when I saw it, I KNEW, instantly, that it would be mine whatever it took.

Please look at my ebay history, I am very straight forward and tell it like it is, with no BS, and I expect the same from any buyer.  There are no surprises in this listing and I have done my best to explain everything I know about this car.  Some of the information was given to me from the guy I bought it from.  Please bid with confidence.  $500 deposit due immediately upon winning the auction.  I do not want trades so please do not ask.  I reserve the right to sell this car off ebay and end the auction early.


Auto Services in California

Woody`s Auto Body and Paint ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 9020 Gardendale St, Santa-Fe-Springs
Phone: (562) 633-3813

Westside Auto Repair ★★★★★

Auto Repair & Service, Auto Oil & Lube, Brake Repair
Address: 115 McPherson St, Davenport
Phone: (831) 600-7074

West Coast Auto Body ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 15144 Valley Blvd, Cerritos
Phone: (626) 961-2779

Webb`s Auto & Truck ★★★★★

Auto Repair & Service
Address: 2146 S Atlantic Blvd, Bell-Gardens
Phone: (323) 268-1266

VRC Auto Repair ★★★★★

Auto Repair & Service
Address: 2409 Main St, Moreno-Valley
Phone: (951) 276-3280

Visions Automotive Glass ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Glass-Automobile, Plate, Window, Etc-Manufacturers
Address: 8698 Elk Grove Blvd #1-238, Walnut-Grove
Phone: (877) 312-0678

Auto blog

Ford reveals EcoBoost-powered Riley prototype for Daytona 24

Tue, 01 Oct 2013

It's not the first time Ford has participated in the Daytona Prototype class as an engine supplier, but in revealing this new EcoBoost V6-powered Riley Technologies prototype for the new United SportsCar Championship, Ford is making a statement: "We want to show Ford EcoBoost's capabilities as an engine that provides both performance and fuel economy, on and off the track," says Jamie Allison, director of Ford Racing.
In addition to supplying the 3.5-liter twin-turbocharged V6, Ford had its production designer Garen Nicoghosian give the racecar brand-inspired design cues with support from Ford Racing chief aerodynamicist Bernie Marcus.
The car is scheduled to compete at next year's Rolex 24 at Daytona on January 25-26, but before that, Michael Shank Racing is working with Ford at another goal. Driving his Ford Thunderbird, NASCAR champion Bill Elliott set the track's top speed record at 210.364 miles per hour during a qualifying run for the Daytona 500 - way back in 1987 -- and Ford thinks it's about time for that record to fall. What better time the introduction of this new Ford-powered Daytona Prototype? Michael Shank Racing plans to use the twin-turbo V6-powered racer to beat Elliott's record, and it expects to begin prepping for the top-speed run on October 9. Scroll down for the full press release below on Ford's latest race effort.

How Ford secretly used customers to test its aluminum F-150 [w/video]

Fri, 30 May 2014

Automakers getting clever about disguising development vehicles isn't anything new. Between mules wearing the sheetmetal of other cars and prototypes decked out in as much camouflage as is practical, automakers know how to make it very difficult for the general public to get an exact idea of what kind of vehicle is in development. Ford, though, is rapidly becoming the master.
We knew that the Blue Oval originally tested the durability of the aluminum construction being used for the 2015 F-150 by building an all-aluminum 2014 truck and entering it in the Baja 1000 off-road race. That's no longer a secret. What we didn't know, though, is that the aluminum development dates back to before even that, and that some of the people in question had no idea what it was they were working with.
Ford says this is the first time prototypes have ever been handed over to the public.

Ford doubling 1.0L EcoBoost engine production

Fri, 06 Sep 2013

Ford's 1.0-liter EcoBoost three-cylinder engine hasn't been around that long, but it sounds like the engine is getting to be fairly popular in the automaker's global car lineup. The Detroit News is reporting that Ford has add a second shift that will allow its German engine plant to double daily output from 500 engines to 1,000.
The increased capacity is part of a plan to sell more than 300,000 vehicles a year with this engine in Europe by 2015. Europe is currently the only market where the smallest of the EcoBoost engines is offered (including in the Focus pictured above), but US-spec Fiesta models will be getting this mill for 2014.
Three-cylinder engines are expected to continue to grow in popularity in coming years with the report indicating that global production of these engines will double by 2018 to 9.8 million units. General Motors, BMW and Mitsubishi are all expected to introduce three-cylinder engines in the near term, as well.