1929 Ford Streetrod Hotrod Project Gasser Roadster Street Rod on 2040-cars
Thornton, Illinois, United States
Vehicle Title:Clear
Make: Ford
Drive Type: auto
Model: Model A
Mileage: 1
Trim: Base
I am selling my 1929 ford fiberglass roadster project car. The car is painted electric yellow the car has not been water sanded yet. The pant is a 3 footer not perfect but nice. The little roadster has a 350 small block chevy new rebuilt 700r4 trans. The roadster has a ford 9 inch rear with drum brakes all new brakes and hardware. all the brake lines are ran and the brakes do work just need to be bleeded. the little hot rod has new saddle tanks and a new electric fuel pump the fuel lines are ran to the fuel pump just not up to the carb. the engine and trans are mounted. I have the drive shaft just needs to be cut down. The car has a quick wire kit thats not finished and you will have to finish wiring the car. the car has to tops that come with the hard top and the soft top need to be fitted and the soft top will need to be re covered. the car has coil overs with a 4 bar out back drop axle front end all new brakes up front. the car also has a walker radiator. I have a clean 1929 ford title for the car. THe roadster has a rumble seat. The 29 also has vdo gauges gm column centerline wheels This car is very close to being finished and a driver. I am open to trades on pre 60 cars and trucks. I am sure i am forgetting stuff but like i said this is a cool little car thats needs finished. I reserve the right to end the auction at any time car is for sale locally any question ask thanks car must be paid for within 5 days of end of auction On Nov-09-13 at 10:00:38 PST, seller added the following information: Is been asked a few times already this is not a finished car this car still needs to be finished. I do have a hood and hood sides they are not painted yet. i am asking for the most part what i have in this car so look around at what it cost to build a car. No the paint is not perfect but it does look good from about 3 foot some people say it looks good when you are on top of it. Again it need to be finished. and one more thing i bought this car with the frame done i never took the body of the frame the frame black. I do have some extra seats that go with. This is a fiberglass body. The title is in my name and is clear. any more question ask thanks |
Ford Model A for Sale
- 1928 ford model a tudor sedan coach all henry ford steel florida fresh
- 1929 ford model a rat rod street rod hot rod
- Murray town car(US $9,500.00)
- 1930 model a ford 150b stationwagon(US $38,000.00)
- 1931 model a rumble seat coupe
- Hot rod rat rod street rod custom project coupe rumble seat frame off restored
Auto Services in Illinois
Wickstrom Chrysler Jeep Dodge ★★★★★
White Eagle Auto Body Shop ★★★★★
Walter`s Foreign Car Serv ★★★★★
Tyson Motor Corp ★★★★★
Triple X Transport Refrigeration & Trailer Repair ★★★★★
Total Car Total Care Inc ★★★★★
Auto blog
Former Ford CEO Alan Mulally lands on Google board
Wed, 16 Jul 2014Former Ford CEO Alan Mulally often referred to the Blue Oval as a technology company when he led the automaker. Now he'll be offering guidance to a different kind of technology firm: Google.
Mulally was appointed to Google's board of directors July 9, and late Tuesday, it was announced that he will serve on the company's audit committee. The veteran executive led Ford from September 2006 until he retired in June, succeeded by Mark Fields.
While Mulally will act as a board member - rather than in a managerial role - his presence adds credibility to Google's recently announced plans to produce an autonomous car. The ambitious program calls for 100 prototypes to begin testing later this summer. Production of the car is rumored to be in collaboration with a Detroit area performance company, Roush.
Ford's Mulally now said to be in lead for Microsoft CEO job
Sun, 29 Sep 2013There have been rumors that Ford CEO Alan Mulally could assume the top job over at Microsoft, whose CEO, Steve Ballmer, will retire within the year. Mulally hasn't come out and said that he's considering moving to Microsoft after (or before) his contract with Ford through 2014 ends, but sources in the know say he's the front-runner to become the tech giant's CEO and has opened up to the idea more in recent weeks, AllThingsD reports.
Mulally is no stranger to Washington, where Microsoft is located, having worked in the state for Seattle-based Boeing Commercial Airplanes as CEO years ago. He also recently was an adviser to Ballmer in an effort to realign the company's management structure to help it become more competitive in a fast-changing computer hardware and software market. And when Ford developed its Sync digital interface, it tapped Microsoft to provide the operating system, Microsoft Auto. Perhaps the least crucial connection - but nonetheless an important one - is that Mulally still owns a house in the Seattle area, and it's been said he wants to return there, according to AllThingsD.
A main challenge Microsoft's next CEO will face is how to manage the company's numerous, fractured operations and, eventually, streamline them. But even on this front, Mulally has experience; after all, it was he who ushered in an era of global Ford vehicles, after the automaker had become complacent developing and selling vehicles by region leading up to the economic recession of 2008-2009.
Ford, Samsung shack up to bring regen braking to non-hybrid models [w/video]
Mon, 09 Jun 2014Ford must be desperate to get itself ready for the beach this summer because it is really trying to get into shape. Shortly after unveiling the Lightweight Concept that cut the weight of a Fusion down to that of a Fiesta, it's now the rest of the line's turn for improvement. The company is wrapping up a 10-year research project aimed at developing next-gen automotive batteries to improve efficiency.
Ford claims that 70 percent of its lineup will have stop/start tech by 2017. The key to this massive proliferation is its new dual-battery system that combines a lithium-ion battery with a lead-acid one and regenerative braking. The setup works by harvesting braking energy and converting it to electricity. When the vehicle stops, the engine shuts off, but the Li-ion battery has enough juice to keep the accessories running. The engine starts up again as drivers take their foot off the brake. The layout would mean less wasted gas while idling. It's already available on Ford hybrids and is somewhat similar to the i-Eloop capacitor-based system from Mazda.
The bigger challenge is tuning the regenerative braking right. While hybrid drivers may be a little more adventurous, when it comes to getting a hang of regen braking, conventional buyers might not be so open-minded. The systems have a tendency to be a little grabby at first and then taper off at very low speeds. Ford needs to make sure it's just right to avoid turning off buyers.
2040Cars.com © 2012-2024. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Cars User Agreement and Privacy Policy.
0.021 s, 7244 u