2013 Se New 1.6l I4 16v Manual Fwd Sedan Premium on 2040-cars

Auto blog

2015 Ford F-150 shaves 700 pounds, adds 2.7-liter EcoBoost [w/video]

The Ford F-150 is one of the best selling vehicles on the planet. Considering that, one can imagine that when it comes time for a redesign, there are hardly any half measures. For its lucky thirteenth generation, Ford has gone all-in on the single most important vehicle in its portfolio, redesigning it from the ground up.
The big news is the F-150's new, lightweight, Atlas-inspired body. Ninety-three percent of that new body is made from a sort of aluminum alloy not unlike what the US military uses in its M2 Bradley fighting vehicles and Humvees, and it accounts for up to 70 percent of the F-150's 700-pound weight reduction. As a side benefit, the aluminum body should prove more resistant to dents and dings. Built Ford tough, indeed.
If you're wondering where the other 30 percent of that 700-pound weight loss went, 8.5 percent (60 pounds) came from the increased use of high-strength steel (up from 23 percent to 77 percent) in its ladder-box frame. Ford claims this steel is comparable to some of the heavy duty pickups used by its competitors, with a PSI rating of 70,000.

Crowdsource funding push on to save historic Ford buildings

Detroit has no shortage of old, abandoned buildings, both within the city and in the surrounding communities. Few, though, have the historical significance of the old Ford Highland Park facility. Home to the very first moving assembly line, Highland Park was designed by the legendary Albert Kahn, and was one of the homes of the Model T.
Now, the Woodward Avenue Action Association is attempting to buy both the 40,000-square-foot admin building, which is located off the historic Woodward Avenue, and an 8,000-square-foot garage. The WAAA's goal is to convert the buildings into an automotive heritage center. The Detroit News spoke to the interim director of the WAAA, Deborah Schutt, who commented, "[Metro Detroit has] not been very good at telling our own story. So we've decided, let's pull everything together and tell our story."
The WAAA made an offer of $550,000 to buy the two buildings, and has $400,000 from the Michigan Department of Transportation and another $15,000 from the Michigan Economic Development Corporation. It's trying to raise a further $125,000 through crowd-sourcing, starting a campaign called "Five Dollars A Day," after old Hank Ford's $5-per-day wage for line workers.

Ford Mustang returning to Australia in 2016

Australia's Herald Sun newspaper has reported that the next-generation Ford Mustang is heading Down Under in 2016, just as Ford is hanging the "Closed for Good" sign on its Australian manufacturing operations and sending the Falcon to its grave. Ford hasn't offered any official word on the matter, but the paper says that Ford's global VP of sales and marketing, Jim Farley, is flying to Australia to make the announcement himself.
While Ford converted Mustangs in the early 2000s from left-hand to right-hand drive for the Australian market and then sold them at high prices, it's been almost five decades since Ford imported a dedicated right-hand-drive Mustang to Oz. The arrival of the global model specifically made for places like Australia and the UK means Ford will also be able to offer them at better prices than the converted models; the Herald Sun says the price is expected to be "close to $50,000."
And that's for one of the "V8 performance models," which are the only ones Australia will get; Ford apparently won't send the turbocharged four cylinder or the V6. The Aussies could find out in a month from now whether this rumor is true. We will all find out what this Mustang fuss is about when the car debuts at next year's New York Auto Show.