88 Ford F350 Auto Trans, Dully, Ps, Pb, Abs, Cruise, Tilt, No Rust, Low Reserve on 2040-cars

Auto blog

How the Ford F-150 SVT Raptor became a reality

The camouflaged Ford F-150 SVT Raptor prototype captured above blazing its way across the desert during a test run left company engineers giggling in amazement, reveals Jamal Hameedi in a new Autoweek video. Ford's global performance vehicle chief engineer, accompanied by senior exterior designer Bruce Williams, sat down with the publication to discuss the concept and development of the automaker's super off-road F-150.
Designing a high-performance pickup in 2008, right when the cost of gasoline was going through the roof, seemed insane at the time, but the team pushed forward with the innovative vehicle regardless. The interview includes plenty of Ford B-roll footage as visual candy, and the conversations include discussions about exterior design, ride comfort, anti-lock brake tuning, suspension engineering, weight reduction and why it was necessary to make the Raptor visually different than Ford's standard F-150. The model's origin story is very interesting, and you can learn more about it by watching the video below.

'Car Wars' says Ford, Honda to pick up share, Fiat-Chrysler ambitions downplayed

Don't look for a tremendous shifts in automotive market share over the next three years because it might not be coming. That's at least according to the annual Car Wars report by John Murphy, from Bank of America Merrill Lynch Global Research.
In the report's analysis of automakers' market share from 2013 to 2017, it predicts only small changes among the major companies. Ford and Honda see the biggest positive effect with an estimated 0.5 percent increase in their shares over the next three years; to 16.2 percent and 10.3 percent respectively. On the flip side, European automakers and Nissan are expected to lose 0.2 percent each to fall to 8.3 percent and 7.8 percent each respectively. The rest of the industry is predicted to hold steady as it is now.
The biggest loser in that prediction might be Fiat-Chrysler Automobiles. The report certainly throws a wet blanket on its plan for significant gains in market share. Murphy told The Detroit News that the company's goal was "almost unattainable."

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.