1997 Ford F350 Truck With 14' Box on 2040-cars

Auto blog

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Ford and Chrysler reducing summer plant shutdowns

Most domestic automaker assembly plants traditionally take a couple of weeks off during the summer. The shutdowns give each plant time for much needed repairs and maintenance, and in some cases, help better align production with demand. Not this year, though, as demand for many models is outstripping what Ford, Chrysler and General Motors plants can produce.
Ford has announced that it will shorten its annual summer shutdown for most North American plants from two weeks to one. The shorter shutdown will increase the carmaker's annual North American production by 40,000 units on top of the 200,000 extra units that it was already planning to produce this year versus last. Automotive News reports that Ford produced 2.8 million vehicles on this continent in 2012, and that output this year has already increased 13 percent through April.
Chrysler, meanwhile, is also operating at full tilt and plans to run some plants through the summer with no shutdown at all. Those not getting a break include Jefferson North where the Jeep Grand Cherokee and Dodge Durango are assembled, Toledo North that will assemble the new Cherokee, and Conner Avenue, home of SRT Viper production. Other assembly plants will be down for a single week, while all of Chrysler's engine and transmission plants except one in Indiana will continue operating with no shutdown this summer.

Americans will get a four-cylinder Ford Mustang after all? [w/poll]

Ask and you shall receive. Remember that previous report suggesting that the 2015 Ford Mustang getting a four-cylinder EcoBoost engine, and that it would be sold in Europe only and not the United States? Well, according to Road & Track, the rumor is only partially true - The Mustang will get the engine, but it is indeed coming to America.
Additionally, according to RT, the 3.7-liter V6 will continue to serve as the base engine, and since it offers up a stout 305 horsepower in its current form, it's likely that the 2.3-liter four-cylinder EcoBoost will produce a bit more than that. At the top of the range, the Mustang GT will continue to soldier on with a V8 engine, which should continue to send over 400 horsepower to the rear wheels.
Finally, while we agree 100 percent with RT's heartfelt request for a paddle-shift automatic, we certainly expect that the EcoBoost 'Stang will be offered with a manual transmission as standard equipment. This is a Mustang, after all...