2001 Ford F-250 Super Duty Xlt Standard Cab Pickup 2-door 6.8l on 2040-cars

Auto blog

Ford bringing 10 custom Transit Connects to SEMA

With 57 vehicles planned for its SEMA display, it comes as little surprise that Ford has plenty of teasers for its show cars. After showing us what it has in store for the Mustang, Fiesta and Focus ST, now we're getting a look at some of the custom creations based on the redesigned 2014 Transit Connect van.
These nine Transit Connects are decked out to various degrees of customization, but our favorite might be the chopped and lowered Transit Connect from Mob Steel (shown above), which has a similar slammed stance that we see on some custom VW Buses. On the opposite extreme, LGE & CTS Motorsports has jacked up a Transit Connect to make a Cross Country cruiser that we wouldn't mind taking on a road trip.
There are seven other teasers from various companies, and you can check them all out in the gallery above or in the press release below. Ford is also promising a tenth Transit Connect for SEMA, so stay tuned for that as well.

Ford paying $750 million just to close plant in Belgium

According to a report from Reuters, Ford is shelling out $750 million in a severance deal that will see the automaker close its facility in Genk, Belgium. The automaker reached this deal with the 4,000 hourly workers employed at the plant last week, which means the company will pay out an average of $187,500 per worker.
Ford is still negotiating with the 300 salaried workers at the factory, which currently produces the Mondeo sedan. All told, Ford expects to lose around $2 billion in Europe thanks in no small part to the region's ongoing economic downturn, and two more plants are scheduled to be shut down in Europe this year. The company will log its $750 million payout under "special items" for this quarter.
As you may recall, Ford took a similar path in the US back in 2009 when the domestic market took a spill. Back then, the company shelled out around $50,000 per employee with at least one year of experience, plus either $25,000 toward a new car or an extra cash payment of $20,000. It would seem the cost of closing plants in Belgium is a much harder pill to swallow than in the States...

These horribly misguided front-drive design studies nearly became the Mustang

As we eagerly await the unveiling of the all-new sixth-generation Mustang, Ford has been giving us some great information over the past few months showing what has gone into shaping its venerable pony car. As many changes as the Mustang has gone through in its 50 years, though, it appears the fourth-gen model played a decisive and pivotal role in the car's future.
As is part of Mustang lore, the front-wheel drive Ford Probe was originally developed as a next-generation Mustang in the Eighties before cooler heads prevailed. The Blue Oval has just released a handful of images showing how bad things could have been - including a full-scale clay model of a front-wheel-drive Mustang (shown above). Fortunately, the FWD Mustang plan was scrapped and Ford went to work designing a rear-wheel-drive replacement for the Fox Body Mustang, with three design studies making it far enough to become full-scale models. These include the soft "Bruce Jenner" Mustang, the over-the-top "Rambo" Mustang and the middle-ground "Arnold Schwarzenegger" Mustang, which finally became the basis for the 1994 'Stang.
By early 1991, the design language of the fourth-generation Mustang had been worked out, and the rest, they say, is history. Scroll down for the fascinating press release telling the story of the fourth-gen Mustang, and be sure to check out the gallery of horribly misguided sketches and various design studies that were all on the table in the late 1980s.