1964 Ford F250 Styleside 4x2 Pickup on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost flogged and analyzed by Ignition

Aside from the way it looks and perhaps its independent rear suspension, the biggest bit of news on the 2015 Mustang may be the inclusion of its 2.3-liter, turbocharged four-cylinder engine. That blown mill marks the first time since the Mustang SVO of the '80s that a turbo has been fitted under the engine of Ford's pony car.
The Mustang EcoBoost is the subject of the latest episode of Ignition from Motor Trend, giving us a great look at the technical, nitty-gritty side of the turbocharged coupe. Covering it from bow to stern, host Carlos Lago walks us through the boosted Ford before taking to the track for some driving impressions, with particular praise given to the low-end grunt of the 2.3-liter mill.
Check out the full video and then let us know which 2015 Mustang has your interest piqued the most - the EcoBoost four, the 5.0L V8 or the entry-level V6.

Ford E-Series chassis cabs and cutaways to survive mass Transit onslaught

In March 2013, Ford announced we'd be getting chassis cab and cutaway versions of the Transit. Since incoming Transit vans will soon be rolling over the grave of the E-Series van, it was assumed that all E-Series models would go six feet under as well. According to a report from PickupTrucks.com, however, that's not the case, the report claiming that the highly modifiable E-350 and E-450 chassis cab and cutaway versions will continue being produced in Avon Lake, Ohio "at least until 2020."
Being decades old, the be-cabbed E-Series platform has found its way under an army of heavy-duty shuttle buses, work truck and ambulances. Ford spokeswoman Jessica Enoch verified the production horizon, telling Autoblog that the particular E-Series configuration "are a higher GVWR than the Transit chassis cab and cutaway (available this summer), which is more Class 2 and a new segment for us." So there you have it.

70% of pickups could use aluminum by 2025

In the next decade, the auto industry will see an explosion in its use of aluminum to cut weight and increase fuel economy, according to a study from market analysts Ducker Worldwide cited by The Detroit News. We are already seeing the lightweight metal show up extensively in luxury models from Europe, but with the impending launch of aluminum-intensive 2015 Ford F-150 (pictured above), North America is using it even more, as well. The report predicts 70 percent of US pickups to have aluminum bodies by 2025.
It won't just be pickups that see the benefit, though. The average amount of aluminum in US vehicles is forecasted by the study to grow from an average of 350 pounds in 2013 to about 550 pounds by 2025. The most common parts to use it will be hoods, doors and - to some extent - roofs, as well.
The massive increase in pickups' aluminum content hardly seems surprising. The F-150 is predicted to use so much that it might cause a short-term shortage, according to one earlier report. At the same time General Motors is heavily rumored to be negotiating with suppliers for the next generation Chevrolet Silverado and GMC Sierra. Ram is the last holdout of the Big Three, but the study predicts that not to last.