2010 Xlt Used Certified 4l V6 12v Rwd Suv on 2040-cars

Auto blog

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.

Ford hybrids getting update to improve fuel economy

Ford has announced that it is introducing "calibration updates designed to improve on-road fuel economy for owners of the 2013 Ford C-Max Hybrid, 2013 Ford Fusion Hybrid and 2013 Lincoln MKZ Hybrid."
We can speculate that these changes are at least due in part to lawsuits over mileage claims of hybrid vehicles. The automaker is enhancing 2013 models starting in August by raising their electric cruising speed to 85 miles per hour from 62 mph, optimizing the use of active grille shutters and the climate control system, shortening the engine warm-up period by 50 percent and reducing electric fan speed to minimize the fan's energy consumption.
It bears mentioning that Ford is doing pretty well in the US electrified vehicle market this year. The company claims to have grown its share in the segment by 12 points to 16 percent while taking a high number of Toyota Prius trade-ins in the process. Conversely, Toyota has experienced a five-percent drop in new-Prius sales over the same period. Additionally, Ford states that it has increased its share of the US vehicle market by one percent this year, more than any full-line automaker.

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.