Wheelchair Van - 4x4 - Ford E-250 on 2040-cars

Auto blog

70% of pickups could use aluminum by 2025

In the next decade, the auto industry will see an explosion in its use of aluminum to cut weight and increase fuel economy, according to a study from market analysts Ducker Worldwide cited by The Detroit News. We are already seeing the lightweight metal show up extensively in luxury models from Europe, but with the impending launch of aluminum-intensive 2015 Ford F-150 (pictured above), North America is using it even more, as well. The report predicts 70 percent of US pickups to have aluminum bodies by 2025.
It won't just be pickups that see the benefit, though. The average amount of aluminum in US vehicles is forecasted by the study to grow from an average of 350 pounds in 2013 to about 550 pounds by 2025. The most common parts to use it will be hoods, doors and - to some extent - roofs, as well.
The massive increase in pickups' aluminum content hardly seems surprising. The F-150 is predicted to use so much that it might cause a short-term shortage, according to one earlier report. At the same time General Motors is heavily rumored to be negotiating with suppliers for the next generation Chevrolet Silverado and GMC Sierra. Ram is the last holdout of the Big Three, but the study predicts that not to last.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

First Ford Mustang prototype shots caught by legendary spy shooter Jim Dunne

You know how people refer to someone as having "been around the block" to mean they're very experienced? Well, when it comes to automotive spy photography, Jim Dunne actually laid down the concrete slabs of the block's sidewalk. The unforgettable Dunne more or less invented the car spy game - a fact he cemented by writing book called Car Spy - and has been delivering spy shots and reporting on the industry for some 45 years now. (He also once employed this writer as his impromptu personal chauffer on a Volkswagen trip in Germany, while he slept, but that's a story for a different time.)
In any event, Dunne must be on a mission to prove that "elder statesman" doesn't also mean "washed up" as it is his shots of the upcoming new 2014 Ford Mustang that we've been handed by our friends at KGP Photography.
Mr. Dunne has likely spent the last few years obtaining powerful telescopic lenses, as the Ford in question has clearly been photographed from some distance. Nevertheless, what you see here is visual evidence that the sixth-generation Mustang has moved beyond the mule stage, and is now testing in proper prototype form. Sources indicate that there are production-spec body panels under that baggy canvass dress; but the slightly less bulky silhouette of the new car can be just made out. While the car's bumpers have been removed to obfuscate things, we can tell by way of the camo's apertures that the car's taillights have moved upwards and towards the lip of the tail. A fender vent appears to be visible, too, just behind the front wheel.