2006 Ford E-350 Super Duty Van 6-door 5.4l on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost

Earlier this week, Ford invited us to Charlotte, NC, to ride in an all-new 2015 Mustang fitted with its turbocharged 2.3-liter EcoBoost four-cylinder. It's the first forced-induction, four-cylinder ponycar for the Blue Oval since the sun set on the 1986 Mustang SVO. We jumped at the opportunity, as only a handful of people have ever been in the passenger seat of this new car, and most automotive media won't get as close as we did until this fall.
As we revealed in our Deep Dive, Ford will slot this new turbocharged four as premium powerplant between its naturally aspirated 3.7-liter V6 and the naturally aspirated 5.0-liter V8. At last mention, the automaker said the direct-injected, all-aluminum engine will develop 305 horsepower and 300 pound-feet of torque, returning the best fuel economy of the three powerplants in the process. History buffs will note that those figures are appreciably stouter than the 200 horses and 240 lb-ft that the '86 SVO realized out of the same displacement, and the latter's figures were hugely impressive at the time. On paper, the new EcoBoost four looks to be a good fit for most owners who want to balance performance with efficiency - we were eager to see how it felt from the passenger seat.
Riding Notes

Martin Smith retires, Joel Piaskowski in as Ford Europe design chief

The mind behind the look of much of the modern Ford global range is retiring. Martin Smith, Head of Ford Design in Europe, will give up his position on July 1 and will leave the company altogether at the end of the year. He will be replaced by current Strategic Concepts Group leader Joel Piaskowski (pictured above).
Smith has led Ford of Europe design for the past 10 years, and he was partially responsible for the brand's Kinetic Design language with a large grille and swept-back headlights found on the Focus, Fiesta and C-Max, as well as several other vehicles abroad. After stepping down on July 1 until his retirement at the end of 2014, Smith will work on a project to decide the future direction of the company's look with Moray Callum, its vice president of design.
Piaskowski already has some impressive credentials in terms of automotive design as well. He joined Ford in 2010 as director of exterior design and led the teams responsible for the 2015 Ford Mustang and next-generation F-150. He was also previously design director at Ford Asia Pacific. Before working at the Blue Oval, Piaskowski held positions at Mercedes-Benz, Hyundai and General Motors. Scroll down to read the complete announcement of this changing of the guard.

3dCarbon now offering body kit for Ford Fusion

A factory-backed body kit by 3dCarbon is now available to Ford Fusion owners who want their car to stand out from the crowd while not being too flashy. The body kit adds a more aggressive front spoiler, side skirts, rear body trim and spoiler that are, in fact, integrated quite nicely into the Fusion's already-comely styling, just as 3dCarbon claims. All Fusions with the kit also receive dual exhaust ports with the stainless-steel exhaust surrounds usually reserved for the Titanium package Fusion EcoBoost models.
A nice detail of 3dCarbon's injection-molded urethane body kit is that it has undergone crash testing to certify that it can withstand crashes up to five miles per hour. Because of this, the kit is warrantied by 3dCarbon for five years or 50,000 miles, much like Ford's warranty on its own parts. In fact, the kit is available through participating Ford dealers and can be financed through Ford Motor Credit. Buyers can purchase the kit - pre-painted or unpainted - and install it themselves, or it can be purchased with a new Ford Fusion and installed at the dealer, pre-painted to factory specifications. Of course, it can also be ordered directly from the source. Take a look at the press release below for more detailed information on the body kit, and let us know what you think of it in Comments.