2003 Crown Victoria Police Intercepter on 2040-cars

Auto blog

Watch these Australian Ford and Holden muscle cars duke it out

Australia's Motoring has put together a little video on two of the great performance vehicles available down under - the Holden VF Commodore HSV GTS and the Ford Falcon FPV GT R-Spec. And while both FPV and the Falcon might be on their way out, there's still plenty of time for a little head-to-head comparison between the two.
The cars aren't all that well evenly matched, though. The Ford boasts a 5.0-liter, supercharged V8, which the Aussies measure out at 449 horsepower and 420 pound-feet of torque. The HSV, though, with its Corvette-derived, 6.2-liter, supercharged V8 is just too powerful - 576 hp and 545 lb-ft of torque.
Predictably, it doesn't end too well for the Ford. As the guys from Motoring point out, the new VF Commodore is just too new and too good, with its extra power and its adaptive dampers (GM's excellent MagnaRide). Interestingly, Motoring did point out that the Holden's electric steering is better than the Ford's hydraulic steering, which is a lot like a Porsche purist saying they prefer water-cooled engines to air cooled.

Ford opens the doors on its Swedish rally skunkworks

It's always amazing to see how different kinds of racecars are made. Formula One racers are often constructed in modern architectural marvels that hint at some of the cutting-edge technology going into the racing. Conversely, rallying is all about sliding around on a varied course as fast as possible, but it often leaves a vehicle caked in mud. So it makes some sense Olsbergs MSE, or simply (OMSE) rally car shop in Nynashamn, Sweden, shows technological sophistication in a more down-to-earth setting. It builds Ford Fiesta ST racers for Global Rallycross there, and this new video gives viewers a tour through the work.
Former rally driver Andreas Eriksson runs OMSE. These days instead of racing, he and the company's 46 employees are building Ford racers from scratch. A ton of work goes into constructing each one, and according to Eriksson, it takes 400 hours to complete each body. At times, things are so busy that some of the technicians live in the shop in apartments that are on premises. There's even a restaurant to keep them fed. Sadly the dyno room is empty during this visit, though.
By the time OMSE is done, a rallycross car might resemble a Fiesta ST on the outside, but as you see in the video, it's a completely different beast underneath. Check out the work it takes to build one of them, and scroll down to read more about it in the official release.

2015 Ford Focus

Sitting down at the pre-drive briefing with Ford engineers ahead of sampling the refreshed 2015 Focus, water bottles clinked as we wet our whistles before Q&A. While pouring a glass, we noticed something stamped on the bottle label: "1L." One liter. We were palming the exact displacement of the EcoBoost engine our group was about to drive. This was undoubtedly coincidence (such bottles litter every conference and dinner table in Europe) but it served to drive home just how small the total swept volume of Ford's wunderkind powerplant really is. It's tiny.
Of course, this isn't our first run-in with the little triple - we've sampled its turbocharged charms before in Ford's smaller Fiesta. At that time, we found it had plenty of poke for the subcompact, but the larger C-segment Focus carries around another 450 pounds or so and pushes a wider profile through the air. Would the three-cylinder have the stuffing to make the most of the Focus' athletic chassis, or would it be a letdown? Would it be the same as it was when we tested it in a Euro-spec Focus a couple of years ago? There was nothing left for it but to head out on the bucolic roads surrounding Versailles the day after the Paris Motor Show and find out for ourselves.