Find or Sell Used Cars, Trucks, and SUVs in USA

1974 Ford Bronco Explorer on 2040-cars

Year:1974 Mileage:133000
Location:

Scottsdale, Arizona, United States

Scottsdale, Arizona, United States

 1974 Ford Bronco 4X4 Ranger

This Bronco is claimed to be a one family owned vehicle that has spent almost it's entire life in northern Arizona. It was purchased new as a motor home tow-behind and was used for that purpose from new until 2011. It then went to Southern California where it had a carburetor fire in mid 2012 and was brought back to Arizona at that time. After repairing the wiring that was damaged and replacing the carburetor the vehicle is a runner-driver again. Much of the under hood plastic was damaged or deformed by the carb fire. An original 302 V8 with automatic vehicle with part time 4 wheel drive with warn hubs, the engine runs well- no ticking or knocking- and the trans shifts tight and smooth. It does leak oil. The transfer case and hubs seem to work well and both axles appear to be in good shape. The body is original and uncut with some dents and possible partial paint work in different areas- most notable being the right front fender damage. Most of the paint and trim appear to be original and the top does not look like it ever came off the vehicle. It has the Explorer option with chrome bumpers and trim as well as power steering, but no power brakes. It looks to have the original interior- with original rear seat- that needs to be redone, and it will need the windshield replaced.

The only rust indicated is minor bubbling on the inner wheel housings under the hood on both sides and the under hood vent intake on passenger's side (see pics). Floors, rockers-virtually everything else looks to be rust free. All in all, a great original example for a restoration or just shape up what is here and use it as an original.

The vehicle is listed for sale locally and I reserve the right to end the auction at any time. It is also available for inspection locally in Phoenix, Arizona. Please contact me to schedule an inspection or if you need any additional pictures or information.

Thanks for looking, and happy bidding!

Auto Services in Arizona

Your Automotive Solution ★★★★★

Auto Repair & Service, Auto Engine Rebuilding
Address: 521 S Gilbert Rd, Queen-Creek
Phone: (480) 890-3080

White`s Integrity Auto Ctr ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 5655 S Power Rd, Apache-Jct
Phone: (480) 988-5180

Wheeler Glass Inc ★★★★★

Automobile Parts & Supplies, Glass-Auto, Plate, Window, Etc, Shower Doors & Enclosures
Address: 7211 E Southern Ave # 101, Apache-Jct
Phone: (480) 497-9400

Tucson Independant Muffler Super Car Center ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Mufflers & Exhaust Systems
Address: 2327 S Craycroft Rd, Oro-Valley
Phone: (520) 790-8716

TechPlus Automotive ★★★★★

Auto Repair & Service, Auto Transmission, Auto Oil & Lube
Address: 7333 E Butherus Dr Ste.B200, Glendale-Luke-Afb
Phone: (480) 207-3158

Super Discount Transmissions ★★★★★

Auto Repair & Service, Auto Transmission
Address: Peridot
Phone: (602) 273-6431

Auto blog

Ford Mustang returning to Australia in 2016

Mon, 15 Jul 2013

Australia's Herald Sun newspaper has reported that the next-generation Ford Mustang is heading Down Under in 2016, just as Ford is hanging the "Closed for Good" sign on its Australian manufacturing operations and sending the Falcon to its grave. Ford hasn't offered any official word on the matter, but the paper says that Ford's global VP of sales and marketing, Jim Farley, is flying to Australia to make the announcement himself.
While Ford converted Mustangs in the early 2000s from left-hand to right-hand drive for the Australian market and then sold them at high prices, it's been almost five decades since Ford imported a dedicated right-hand-drive Mustang to Oz. The arrival of the global model specifically made for places like Australia and the UK means Ford will also be able to offer them at better prices than the converted models; the Herald Sun says the price is expected to be "close to $50,000."
And that's for one of the "V8 performance models," which are the only ones Australia will get; Ford apparently won't send the turbocharged four cylinder or the V6. The Aussies could find out in a month from now whether this rumor is true. We will all find out what this Mustang fuss is about when the car debuts at next year's New York Auto Show.

Who sold the most heavy-duty pickups in 2012? PickupTrucks.com investigates

Tue, 26 Feb 2013

Domestic manufacturers enjoyed a good year for heavy-duty pickup sales in 2012. PickupTrucks.com has taken a close look at exactly how those sales broke down between each manufacturer and between three-quarter and one-ton pickups. Ford sold some 67,786 F-250 Super Duty models last year with the Chevrolet Silverado 2500 HD falling just behind at 56,359 units. The Ram 2500 HD came in third at 41,918, while the GMC Sierra 2500 HD earned itself fourth place with 27,616 deliveries. While Ford held onto the top spot in the one-ton market, Ram easily nailed down second place by selling more 3500 HD models last year than General Motors sold Silverado 3500 HD and Sierra 3500 HD trucks combined.
So, did GM manage to sell more trucks than Ford with its two brands? Very nearly. Ford sold a total of 119,338 heavy-duty pickups to GM's 111,555. Ram, meanwhile, moved a distant 77,583. But perhaps more interesting is the diesel take rate in this segment. PickupTrucks.com says 80 percent of all domestic one-ton trucks roll from the dealer lot with a turbo-diesel under the hood. Head over to the site for a closer look at the breakdown.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

Mon, 08 Jul 2013

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.