2006 Dodge Ram 3500 Laramie Dually ,5.9 Diesel, 6 Spd Manual ,4 Wheel Drive on 2040-cars
Roseburg, Oregon, United States
2006 Dodge 3500 Laramie Dually with a 5.9 Cummins Diesel 6 spd manual trans. This truck has every option that was available including adjustable pedals, sunroof, navigation and so on. It comes with a color matched cab high ARE fiberglass canopy. It has a disappearing gooseneck hitch set up, spray on bedliner and running boards. It has been stored inside my heated shop. The oil has been changed every 3000 miles. The brake pads were all just replaced. It is in great condition. This truck is available for sale locally and auction could end early.
|
Dodge Ram 3500 for Sale
- 2006 dodge ram 3500 slt extended crew cab pickup 4-door 5.9l
- 1999 dodge ram 3500 v10 magnum utility flatbed 2000lb capacity crane & rack.
- 2005 dodge ram 3500 diesel 2wd dually regular cab slt two wheel drive(US $18,980.00)
- 2006 dodge ram 3500 diesel 4x4 srw slt mega cab 1 texas owner(US $28,780.00)
- Srw - crew cab - 4x4 - 5.9l cummins turbo diesel - 57,389 miles - no reserve
- 2001 dodge ram 3500 dually rear wheels utility bed low miles! 5.9l(US $9,400.00)
Auto Services in Oregon
Wayne`s Garage ★★★★★
Valley View Auto Repair ★★★★★
Valley Lock and Key ★★★★★
Used Cars in Portland ★★★★★
Silverline Automotive ★★★★★
Shelton Auto Parts ★★★★★
Auto blog
Dodge Viper recall requires small-handed mechanics
Fri, 25 Apr 2014It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.
Dodge Scat Pack for 5.7L Hemi V8 detailed, priced
Sat, 05 Apr 2014Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.
Chrysler to accelerate production of 2013 Ram and V6 engines
Fri, 16 Nov 2012Chrysler is adding a third shift at its Warren Truck plant to meet demand for the new 2013 Ram pickup. And with tight supplies of its Pentastar V6, the company is also boosting output at its Mack Engine plant.
The expansions will add 1,250 jobs and are part of a $238 million investment by Chrysler in the Detroit area. Warren's third shift will begin work sometime in the spring, a Chrysler rep told Automotive News. Mack's increased Pentastar production a could include both 3.6 and 3.2-liter engines.
The company says it also plans to invest $40 million in its Trenton Engine plant to allow for production of a 3.2-liter V6 as well as the Tigershark inline-four for the upcoming Jeep Liberty replacement.