1998 Dodge Ram 2500 Cummins 5.9l Quad Cab 4x4 With Camper And Trailer on 2040-cars

Auto blog

Dodge idles Viper production again at Conner Avenue

You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.

2013 Dart GT will hold us over until SRT stokes Dodge's handsome compact

No, this isn't quite the Dart SRT4 we've been waiting for - and still believe is coming - but as part of its 2013 Detroit Auto Show lineup, Dodge will be showing off the slightly sportier Dart GT seen here.
Building on the already well-equipped Limited model, the GT adds performance enhancements including a more powerful engine, 18-inch aluminum wheels, sport suspension calibration, unique front fascia and dual exhaust. Inside, you'll find perforated Nappa leather seats, a heated steering wheel and front seats, dual-zone climate control, remote start (if you spec the automatic transmission), Chrysler's 8.4-inch Uconnect touchscreen, a seven-inch TFT display in the gauge cluster, and a whole lot more. Optional goodies include hyper black aluminum wheels, a technology group (pushbutton start, keyless go, rain-sensing wipers, blind spot monitoring and smart-beam headlamps), power sunroof, Sirius radio, Garmin navigation, Alpine premium sound and high-intensity discharge headlamps.
Powering the Dart GT is Chrysler's 2.4-liter MultiAir2 four-cylinder engine producing 184 horsepower and 174 pound-feet of torque. That grunt is sent to the front wheels via a standard six-speed manual transmission, but a six-speed automatic 'box is optional.

Dodge Viper to out-Hell the Hellcat with supercharged V10?

The Viper wouldn't be the Viper if it wasn't the most powerful model under the Chrysler umbrella. But with the arrival of the Hellcat engine in the Dodge Charger and Challenger, the Viper has fallen behind in the bragging rights department: where the new supercharged V8 produces 707 horsepower and 650 pound-feet of torque, the naturally aspirated V10 offers "only" 640 hp and 600 lb-ft - gargantuan output figures by almost any other standard, but crucially behind on the SRT power scale. Conner Avenue is going to have to do something about that.
Although the Hellcat's engine reportedly won't fit under the Viper's hood, SRT is now rumored to have another trick up its sleeve: supercharge the existing V10. According to the Pentastar performance enthusiasts at allpar.com, Chrysler has already taken delivery of the first such prototype engines so that it can begin the process of fitting it into an upgraded Viper.
The spooled ten-pot is tipped to produce around 800 hp and 650 lb-ft of torque. More than that and the Viper's drivetrain, chassis and bodywork would have to be substantially reworked. Though beefier transmissions are available, fitting them would reportedly set off a domino-game of changes required to handle the added torque. Which may be something Chrysler would be prepared to do for the next-generation model, but in the meantime, 800 hp could prove enough to put the Viper back atop the Mopar performance ladder where it belongs, and give it an edge against the new Corvette Z06 to rekindle sales.