2007 Dodge Ram 1500 St Crew Cab Pickup 4-door 4.7l on 2040-cars

Auto blog

Chrysler recalls small number of 2013-2014 cars and trucks over engine debris

Chrysler is recalling a small number cars over issues with their 2.4-liter four-cylinder engines. The recall, which affects 522 examples of its 2013 Dodge Avenger and Chrysler 200 models, as well as 2014 Jeep Compass and Patriot CUVs has to do with potential debris in the balance shaft bearings.
The abrasive stuff can cause the oil pressure to drop, which could lead to the engine stalling or outright failure. This situation could at best leave drivers stranded and at worst lead to a crash.
Chrysler will begin notifying owners, who will need to report in to have the balance shaft module replaced. All repairs are naturally free of charge. Scroll down for the bulletin from NHTSA.

Chrysler recalling over 280k minivans because airbags may deploy on wrong side

Chrysler has issued a recall for some 2013 Town & Country, Dodge Grand Caravan and Ram C/V Tradesman vans built between May 10, 2012 and June 7, 2013. These vehicles may have a software error that would cause the wrong side (opposite side) airbags to deploy in a crash. With this defect, a left-side impact would cause the right-side airbag to deploy, etc.
The recall affects 281,500 vehicles in total: 224k in the US, 49,300 in Canada, 2,900 in Mexico and 5,300 in other locations. Chrysler will notify owners of effected vehicles, and reflash the offending occupant restraint control module to resolve the issue. Scroll down to read the National Highway Traffic Safety Administration press release.

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.