Hello and thank you for looking at my monster! I had hoped to restore it completely but I can't take her with me when I leave and I can't leave her here, so...
I've done so much work to this truck...had the rear end, transmission and transfer case gone over and everything checked out really nicely. Mechanic said the rear-end looked brand new. It does have the floating axles, and the lockers on the front are made by Warn. It is 3/4 ton and will definitely pull and haul, the frame is in really good shape.
Radiator, Carburetor, Custom Breather, Fuel Pump and Filter, Distributor, Cap, Points, Rotor, Condenser, Coil, Marine Battery, Starter
Painless Wiring Harness!
Trailer Brake System!
Complete Brake System, lines included.
We put the windshields in, repaired the floorboards and sealed them and then put in leather bucket seats (VERY comfortable). I also have the big mud tires for the buyer to enjoy. I have the door panels and some other odds and ends also that are not in the pictures. The body has a little to be desired but is decent and functional as it is. It has some issues in the normal places such as rockers, bed corners, etc, and has been painted before.
The engine runs great and the truck does everything it should. The problem it does have is that we have not cleaned and sealed the fuel tank, so the truck will eventually suck up junk and stall. This is the only mechanical problem that I know of, but because of this it will have to be trailered to its new home.
*I've got more than $5,000 in this truck and I know I'm going to take a loss on it, but in this economy that's just the way it is. But, if the bidding gets up to $4,000 I'll throw in the D100 'parts truck' for free!!! The parts truck has a great body and would run with a new carburetor and it only has 30,000 original miles. If the Power Wagon does not sell for $4,000 the winning buyer will have the option to purchase the parts truck for $700.*
Dodge Power Wagon for Sale
Auto Services in Tennessee
Automobile Parts & Supplies, Battery Storage, Engine Rebuilding & Exchange
Address: 126 Bear Creek Pike, Santa-Fe
Phone: (931) 381-4908
Auto Repair & Service
Address: 868 E Lee Hwy, Loudon
Phone: (865) 408-0020
Automobile Body Repairing & Painting
Address: 4854 Dayton Blvd, Chattanooga
Phone: (423) 875-5482
Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 3800 Western AVE, Mascot
Phone: (865) 523-8124
Auto Repair & Service, Tire Dealers
Address: 4420 Lebanon Pike, Hermitage
Auto Repair & Service, Auto Oil & Lube, Truck Service & Repair
Address: 245 Signal Mountain Rd, College-Dale
Phone: (423) 266-5237
Fri, 16 Nov 2012 18:44:00 EST
Chrysler is adding a third shift at its Warren Truck plant to meet demand for the new 2013 Ram pickup. And with tight supplies of its Pentastar V6, the company is also boosting output at its Mack Engine plant.
Tue, 08 Oct 2013 18:59:00 EST
The expansions will add 1,250 jobs and are part of a $238 million investment by Chrysler in the Detroit area. Warren's third shift will begin work sometime in the spring, a Chrysler rep told Automotive News. Mack's increased Pentastar production a could include both 3.6 and 3.2-liter engines.
The company says it also plans to invest $40 million in its Trenton Engine plant to allow for production of a 3.2-liter V6 as well as the Tigershark inline-four for the upcoming Jeep Liberty replacement.
The Las Vegas Convention Center has plenty of space for aftermarket companies and automakers to show off their wares, and it looks like Chrysler is taking advantage of the spacious floor plan. At next month's SEMA Show, Chrysler will have a full 20 cars from its six brands decked out with Mopar gear.
Wed, 16 Jul 2014 13:30:00 EST
As a hint of what is to come, Chrysler released a handful of teaser sketches showing glimpses of modified Jeep Cherokee, Ram 1500, Fiat 500L and Chrysler 300 concept vehicles. The automaker will also use the venue to show off a new line of Jeep Performance Parts offered by the all-new Mopar Off-Road Division. In addition to the images, Chrysler also issued a brief press release - posted below - breaking down some of the "industry-first features" that Mopar has offered in recent years.
When people look back at today's automotive industry, what do you think they'll remember us for? The emergence of hybrids? Ever more expensive and exotic supercars? The dawn of the self-driving car? All likely scenarios, but so is the blurring of lines between one bodystyle and another, giving rise to hardtop convertible coupes and crossovers of every shape and size. But one bodystyle the North American auto industry has stayed largely away from in the past couple of decades is a car nose and chassis with a pickup bed.
It's a bodystyle immortalized by the Chevrolet El Camino, but with few exceptions, we haven't seen too many of these automotive platypuses in recent years on our turf. Subaru tried with the Baja and the low-volume Honda Ridgeline soldiers along largely unchanged, but the genre's biggest adherents are still Down Under, where ute versions of the Holden Commodore and Ford Falcon live. With a few other examples scattered to the four corners of the earth, that's really about it. But if these spy shots are anything to go by, it looks like Fiat Chrysler Automobiles could be working to bring it back.
Spied undergoing testing in Michigan, what we appear to be looking at is a heavily disguised Fiat Strada being prepared - like the Fiat Ducato-based Ram ProMaster and the smaller Doblo-based ProMaster City - for Stateside duty as a Ram product. The Strada, for those unfamiliar, is a product of Fiat Automóveis in Brazil and is based on the Palio economy car. The nameplate has been around South America since 1996 and was originally designed by Giorgetto Giugiaro (long before Volkswagen monopolized his talents), and takes a more rugged approach in the form of the Strada Adventure.