Find or Sell Used Cars, Trucks, and SUVs in USA

1938 Dodge Rat Rod, Street Rod, Must See.... on 2040-cars

US $21,900.00
Year:1938 Mileage:650
Location:

Grass Lake, Michigan, United States

Grass Lake, Michigan, United States

Up for sale is a very nice 1938 Dodge pickup. This truck was built over the winter by Altered Image and it was a ground up build. It is ground down raw metal with 3 coats of semi gloss clear sprayed over top. I have had the truck at quite a few shows this year and have received a few trophies and tons of interest from people and other builders. I have put about 650 miles on the truck since it was finished and it runs and drives really nice for what it is. The truck runs along great at 65-70 mph on the expressway and you can idle in traffic all day and the temp with stay around 180-190 degrees. The truck drives straight down the road and corners very nice.90% of the truck consist of new parts and I have all receipts for the complete build as well as a ton of pictures that will go to the new owner. Just for reference I am 6' tall and roughly 180 pounds and I drive the truck everywhere.

As for the truck here are some of the details.


Chassis / Suspension:
The frame is built out of 2''x4'' tubing, z'd front and rear, x bracing under the cab and all plated in 1/4'' plate. The frame is very well built. Front axle is a Lucky 7 4'' drop axle, 28-48 spindles, Speedway disc brake conversion, traditional radius arms, all suspension and steering bars consist of 5/8'' heim joints, mono leaf front spring, rear axle is disc brake Ford, coil springs in the rear, 4 linked rear with a J bar. 

Engine / Trans:

The motor is a small block chevy that has been bored .30 over and is now a 355ci. Some parts are pro comp intake, Edelbrock 600cfm carb, Comp Cams .500 lift cam, comp cam lifters, comp cam hardened push rods, meling high volume oil pump, GM crank and rods, Comp cam double roller timing chain, heavy duty flywheel, small GM starter, small distributor, Gilmer belt and pully set, finned aluminum tall valve covers and air cleaner, K&N air filter, 2000 stall convertor, billet trans pan, braided kickdown cable, and tons of little aftermarkets.

Interior:

The interior is simple but clean with the floor channeled about 5'', sheet metal bomber seats built to fit the cab, 3/4'' steering with all star pull off steering wheel adapter, 14'' Long acre steering wheel, aluminum gauge panel with gauges consisting of volts, temp., oil pressure, and fuel level. Also worked into the panal are you turn signal and high beam indicators. The glove box is a nice storage spot as well and it is 12''wide x 7'' deep x 7'' tall with a cigarette lighter in it to charge your phone or run your gps. There are lap belts and I installed new style latches in the doors so when you shut the door it latches and your not going to fall out. The door handles and window cranks all function and there is door glass in both doors that you can roll up.

Other:

The fuel cell is 15 gallons, the headers were built to clear the steering. There 1 7/8'' to 3'' collectors with 10'' mufflers and the turn down tips. The rims are 17x7 and I just installed NEW tires the other day that are 235/55R17. These have about 30 miles on them now. The tail lights are early 30's ford and they are tinted as well as the front turn signals.

There is just so much going on with the truck that everywhere you look you will notice something. That was the best part of the build and all the little detail. It is very neat and gets tons of attention. This is great to take to shows, Cruises, or just to do a little grocery shopping.

I do have the truck for sale locally as well as online. If you have any questions feel free to give me a call at 989-529-5485.

Buyer is responsible for shipping costs but I will help in any way I can with a shipper to make it easier.

Thanks for looking.

Auto Services in Michigan

Young`s Brake & Alignment ★★★★★

Auto Repair & Service, Tire Dealers, Tires-Wholesale & Manufacturers
Address: 1320 S Front St, Negaunee
Phone: (906) 228-8700

Winners Auto & Cycle ★★★★★

Auto Repair & Service, Auto Engine Rebuilding, Motorcycles & Motor Scooters-Repairing & Service
Address: 17700 Telegraph, Allen-Park
Phone: (734) 229-1009

Wills Body Shop ★★★★★

Automobile Body Repairing & Painting
Address: 6493 Wildcat Rd, Smiths-Creek
Phone: (810) 327-2154

West Side Auto Parts ★★★★★

Used Car Dealers, Automobile Parts & Supplies, Auto Transmission
Address: 592 32nd St, China
Phone: (810) 985-7766

Wealthy Body Shop Inc ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Glass-Auto, Plate, Window, Etc
Address: 343 La Grave Ave SE, Hudsonville
Phone: (616) 458-5698

Unique Auto Service ★★★★★

Auto Repair & Service
Address: 2456 Port Sheldon St, Holland
Phone: (616) 396-6461

Auto blog

SRT reveals Satin Vapor Edition 300, Charger and Challenger SRT models

Fri, 07 Feb 2014

With the exception of some notable truck and van introductions, Chrysler brands have tended to use the Chicago Auto Show to bring out new special editions, pimp their aftermarket parts support or indulge in the occasional flight of fancy. That plan is holding true for 2014, as well. Cases in point are these new Satin Vapor Editions of the 2014-model-year Dodge Challenger, Dodge Charger and Chrysler 300 - all from SRT.
The Satin Vapor name may sound like a failed 1970s glam-rock band, or a pseudo-gynecological diagnosis from the Old West, but is, in fact, pretty much a tape-and-trim package for this trio of hi-po Mopars. 300, Challenger and Charger alike come shod with 20-inch aluminum wheels finished in Black Satin Vapor Chrome, and are accented with Satin Black bits aplenty. The 300 gets blacked-out mirrors, spoiler and roof; the Challenger applies it to mirrors and its fuel door; while the Charger has the stuff covering its roof, hood and Super Bee tail graphic.
Interiors of the cars have been mildly updated as well, with all three getting some combination of Nappa leather, ultra-suede and carbon-fiberish finishes.

Dodge Challenger SRT Hellcat's 707 storming horses can be yours for $60k

Wed, 16 Jul 2014

We love a good deal on high performance. It's what traditionally makes muscle cars so appealing - you get lots of speed, for not a lot of money. For 2015, Dodge has taken this to its logical extreme, offering its new 707-horsepower, supercharged, V8-powered Dodge Challenger SRT Hellcat for just $59,900. For those wondering, that works out to just about $85 per horsepower, which when compared with a typical budget performance car, like the $24,995, 210-hp Volkswagen GTI ($119 per hp), demonstrates the Hellcat's astonishing value.
The information was revealed by a photo (click on the inset image to expand) taken at this week's Portland launch event (our man Seyth Miersma is just now on the ground and will have a full report on the madness that is the Hellcat soon) for the entire 2015 Challenger range, and reveals the Hellcat's price alongside its high-powered competitors from Ford and Chevrolet.
The discontinued 662-hp Mustang GT500 started at $56,000, while the 580-hp Camaro ZL1 starts off at $58K. Indeed, the only muscle car that outprices the Hellcat is the track-focused Camaro Z/28, a car that we're guessing could still wallop the Hellcat on the right piece of track, despite being down over 200 hp.

Chrysler to accelerate production of 2013 Ram and V6 engines

Fri, 16 Nov 2012

Chrysler is adding a third shift at its Warren Truck plant to meet demand for the new 2013 Ram pickup. And with tight supplies of its Pentastar V6, the company is also boosting output at its Mack Engine plant.
The expansions will add 1,250 jobs and are part of a $238 million investment by Chrysler in the Detroit area. Warren's third shift will begin work sometime in the spring, a Chrysler rep told Automotive News. Mack's increased Pentastar production a could include both 3.6 and 3.2-liter engines.
The company says it also plans to invest $40 million in its Trenton Engine plant to allow for production of a 3.2-liter V6 as well as the Tigershark inline-four for the upcoming Jeep Liberty replacement.