2012 Dodge Grand Caravan Sxt Low Miles Cd Keyless Access on 2040-cars

Auto blog

Roadkill builds crazy-cheap 1968 Dodge Charger rat rod using an old motorhome

Certain requests for description simply cannot be fulfilled, like if someone asked you to describe Picasso's Guernica or Gilliam's Brazil. There is only one appropriate answer to such entreaties, and that is: "You just gotta see it." That's where we are with the latest episode of Roadkill, wherein Messr's Freiburger and Finnegan dig out a 1968 Dodge Charger that Freiburger acquired in exchange for a set of cylinder heads, and intend to stuff it with the big-block motor from a long-bed, three-quarter ton Dodge pickup.
Only the pickup is too nice to tear apart, and the Charger needs a whole lot more lovin' - and parts - than initially expected. Enter, stage right, the Class A Dodge Pace Arrow motorhome with a 440 big-block purchased for $1,000, and a retired Plymouth Fury from a previous episode.
What ensues over the course of the 40-minute installment is more cuttin', yankin', leakin', stallin', hammerin' and smokin' action than you've seen in a long time, and some techniques that would have made even Cooter wonder, "I'm not sure if we should do that." By the end, though, the payoff is good enough to make you think about perusing AutoTrader for a '68 Charger just to see if maybe...

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

Hero gets his truck back better than new thanks to community support [w/video]

You ever hear a story and start cringing before you hear the end because you know how it's going to turn out? That could very well have been the case with the story from a few weeks ago in West Valley City, Utah, where a 14-year-old kid stole his grandfather's Hyundai Veloster and took it for a joyride - through a park full of children. But instead it turned into a heart-warming tale of heroism and a community banding together to do what's right... and then some.
Bryson Rowley was that hero who identified the danger and, rather than sit idly by and watch the joyrider potentially run over a child, got into his truck and drove it into the menacing runaway hatchback. The collision caused some $7,500 to his 2008 Dodge Ram 2500, but instead of getting stuck with the bill - one which his insurance may very well have refused to pay since the crash was, technically speaking, intentional - his community pitched in a helping hand.
Bryan Ellison, who owns West Valley Carstar with his brother, saw the news on television and wanted to help. So he brought Rowley a rental car, picked up his truck and brought it back to his auto repair shop. People from around the community donated parts, and when all was said and done, some $15,000 of work and upgrades were performed on the Ram that was returned to an overwhelmed Bryson Rowley better than new. Watch the video below for the full story.