1970 Dodge Challenger 2dr Sport 440 Pistol Grip 4 Speed on 2040-cars

Auto blog

Dodge Challenger spied exercising supercharged Hellcat Hemi V8

One of the prime complaints against the Dodge Challenger is that, even in SRT8 guise, its 470 horsepower is responsible for hauling over 4,200 pounds of vehicle. For comparison, the 420 hp in the Ford Mustang GT only has to deal with 3,618 lbs. Things only get worse from there, as the higher-performance variants of both the Mustang and the Chevrolet Camaro are far more powerful than an SRT8 without adding on much heft.
So what is Chrysler to do? The correct answer is add a whole lot more grunt to its hefty two-door and even the odds. That's where the all-new Hellcat engine comes into play. We reported on this engine in May, and suggested that the Hellcat, a supercharged powerplant based on a 6.4-liter V8, would easily generate 500 to 570 hp and could likely arrive boasting more than 600 ponies.
Chrysler's ace in its sleeve has now been spied testing, with a number of Hellcat-equipped Challengers running the potent new engine both in more urbanized areas and under the sun of Death Valley. The hoods on these testers have been raised to accommodate the engine, and that camouflage over the fascias of these prototypes is there to hide a larger air intake. We also note what appears to be a new split grille under wraps. As for power output, our spies are now suggesting a Viper-equalling 640 hp from the Hellcat-equipped cars.

Chrysler recalling 31k SUVs and vans

Chrysler is issuing recalls covering roughly 31,700 vehicles worldwide due to two separate problems. In both cases the company believes that most of the affected vehicles are either still on, or in transit to, dealer lots.
One recall covers roughly 10,700 Dodge Durango, Jeep Cherokee, Grand Cherokee and Grand Cherokee SRT models from the 2014 model year built between January 16 and April 17, 2014. The SUVs need a software update for the cruise control. It's possible that when the cruise is on and the driver presses on the throttle, the acceleration could last a second after the pedal is released or two seconds for the SRT. Afterward, they return to the speed originally set by the driver.
Chrysler says it isn't aware of any accidents, injuries or even reported incidents of this happening in the real world. Also, in all cases, if the driver presses on the brake, the cruise shuts off. The automaker believes that there are about 6,100 affected SUVs in the US, 950 in Canada, 425 in Mexico and 3,200 outside of North America. The software upgrade will be ready shortly, the company says.

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.