Find or Sell Used Cars, Trucks, and SUVs in USA

1978 Datsun 280z Nissan 280z on 2040-cars

US $3,500.00
Year:1978 Mileage:5100
Location:

Bemidji, Minnesota, United States

Bemidji, Minnesota, United States

Here is a true survivor 1978 Datson 280Z  2 seater. The car runs and drives great, however I would recomend you trailer it or ship it home. It has been sitting for about 15 years in storage. It will need tires and a tune up as well as the brakes blead. I fired it up the other day and the longer I run it the better it ran. The clutch started slipping so I brought it to the mechanic to have the clutch fixed but it was only a mouse nest in the bellhousing, so I had him put the new clutch kit in anyway. I drove it home at highway speeds it ran out just fine. (about 20 miles) breaks were a little spongey but worked great. I also put in a new battery.

The A/C still blows COLD!

Spare tire, jack,and charge bottle for the spare are still in trunk...( These are very hard to find)

As far as the body goes It's in great shape for a 78 datson....The floor pans are perfect, rockers are perfect, door bottoms are perfect,inner fenders are perfect. The only bad part about the car is somone in 1985 brought it in to a shop and put the fender flares on it. ( which are cracking where they meet the body) I think they got busted up in storage from being bumped all the time. In my opinion I would put new rear quarters on it and bring it back to orginal. (look at the pictures I showed a reciept for the work done in 1985)

The other bad spot on the car is underneath the floor pans is a square tube that runs from front to back ( looks like the frame molded into the floor pans) on that piece where the car has scraped the ground or what ever, it scraped the undercoating off of it so a few spots rusted out not on the sides just the bottom looks like three spots about 2'' wide by 4'' long nothing too serious.

I have the owners manual as well as the orginal window sticker from when it was new. (look at pictures)

This would be a great car to restore or just drive it the way it is!

If you have any questions please call me 218-308-1852 if I dont answer please leave a message and I will call you back.

I require a $500 deposit due immediatly after you hit buy It now or make an offer and I accept it. Full balance due within 3 days after auction ends.

If for any reason these terms don't work for you please call me before you hit buy it now or make an offer so we can make other arrangements that work for you.

I will help load as well as store for a reasonable amount of time until you come get the vehicle or send a transport.

I do have a regular transport that comes here every two weeks, so I can provide a shipping quote! (please call for quote)

Overseas buyers welcome! ( sorry I can only quote shipping to a port)

Thanks for looking!

Auto Services in Minnesota

Tire Pros & Wheel Experts ★★★★★

Auto Repair & Service, Used Car Dealers, Automobile Parts & Supplies
Address: 1800 Crest View Dr, Oak-Park-Heights
Phone: (715) 808-0195

Southern Minnesota Auto & Motor Sport ★★★★★

New Car Dealers, Automobile Body Repairing & Painting, Used Car Dealers
Address: 20899 610th Ave, Eagle-Lake
Phone: (507) 257-3929

Prior Lake Transmission ★★★★★

Auto Repair & Service, Auto Transmission, Auto Oil & Lube
Address: Cokato
Phone: (952) 679-8734

Oscar Auto Body Inc ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Truck Body Repair & Painting
Address: 2827 1st Ave S, Saint-Louis-Park
Phone: (612) 871-7052

Northside Auto ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Oil & Lube
Address: 4200 Fremont Ave N, Brooklyn-Park
Phone: (612) 200-0149

Nordic Auto Glass LLC ★★★★★

Auto Repair & Service, Windshield Repair, Glass-Auto, Plate, Window, Etc
Address: Freeport
Phone: (763) 260-1415

Auto blog

Nissan IDx 'in the plan' for production, needs support from fans [w/poll]

Wed, 15 Jan 2014

If there's a trend in the auto industry we can firmly get behind, it's the small, light and affordable rear-drive coupe. The positive critical reception to the Scion FR-S and Subaru BRZ twins has encouraged other manufacturers to look at building their own rear drivers, and even a few to show actual concept cars based on the idea. The Chevrolet Code 130R from 2012 and more recently, the Nissan IDx twins that were first shown at the 2013 Tokyo Motor Show both come to mind, as does the brand-new Kia GT4 Stinger Concept.
Nissan trotted out the IDx Nismo and the IDx Freeflow for another showing in Detroit and we'll admit to being totally smitten with both cars. Again. The duo draw inspiration from the iconic Datsun 510, a lightweight, affordable rear-driver that remains a cult favorite decades after production ended.
Now, a report from our friends at AutoWeek reveals that we may, possibly, hopefully see a production IDx, provided fans make a strong enough case for it. "It's in the plan," Nissan product boss Andy Palmer told AW. According to the report, Palmer said the IDx is "into the first sage of the development process. The next stage is project validation and then looking at the business case. It's no one's intent to waste millions of the company's money, so obviously we have a good feeling about this one."

Renault planning a Tata Nano rival. Again.

Wed, 28 Nov 2012

Four years ago, Renault confirmed that it would partner with India's Bajaj Auto to develop a rival to the Tata Nano. At the time, as everyone waited for the Tata Nano to arrive, you could have used a Richter scale to measure the tremors the executive suites of any automaker with an interest in the low end of emerging markets. Then the Nano, still the cheapest car in the world, didn't sell so well - at the end of last year its sales were just six percent of its most conservative projections - and everyone seemed content to let Tata spend the money to figure out if there really was a market for the cheapest car in the world.
Renault believes there is, kind of. Automotive News Europe reports that it will partner with Nissan to build two low-priced cars for emerging markets, one for €3,000 ($3,888 U.S.) and another for €5,000 ($6,400 U.S.). The price of the least expensive offering is nearly $1,400 more than a Nano, which costs $2,500, and that can't be considered a small sum in comparison. But one of the hindsight knocks on the Nano has been that even in emerging markets buyers don't want a car whose biggest lure is that it is cheap; they'd rather give their aspirations a bit more of a workout.
Renault's offerings are scheduled to hit the non-Western market in late 2014, which is coincidentally the same year that will see the return of the budget-minded and emerging-market-specific Datsun nameplate. They'll be built in Renault facilities in Chennai, India, with no mention made of Bajaj this time around.

Fiat contemplating sub-brand to compete with Dacia, Datsun

Tue, 05 Feb 2013

You can add Fiat to the admittedly short list of automakers considering a low-cost brand to rival Dacia. The inexpensive Eastern European brand from Renault-Nissan has performed on the balance sheet like a premium model line, and the money the alliance is taking off the table is encouraging other players to deal themselves in. Pretty soon Nissan's Datsun sub-brand will join the Dacia party, going on sale in Russia, Indonesia and India and will claim even more rubles, rupiahs and rupees for the parent company. Volkswagen recently said it will make a decision this year on a budget line for the Chinese market. With the euthanasia of Lancia and plans to move the Fiat brand upmarket, company CEO Sergio Marchionne wonders aloud to Automotive News Europe whether there could be room for a new budget brand underneath Fiat.
We're told that the initiative has been in the idea box for five years and even moved to the stage of name considerations, like Innocenti, but worries about profit kept it from realization. If such a range were to be developed, Marchionne says it couldn't be built in Italy and stay within budget, and the company is "analyzing its manufacturing capacity outside of Europe to see if a low-cost brand is viable."