2005 Convertible Cd Player Very Clean We Finance 866-428-9374 on 2040-cars

Auto blog

2015 Chrysler 200 gets 36 mpg with Tigershark four-cylinder

Chrysler has come out with the official fuel economy information on the new 200 following the info that was leaked from the EPA earlier this week. It turns out that our initial report of 18 miles per gallon in the city and 29 mpg on the highway for the all-wheel-drive V6 was correct.
What we didn't know at the time, though, was what sort of economy the 200's other powertrain options managed. Outfitted with the 2.4-liter four-pot, Chrysler is promising 23 mpg in the city and 36 mpg on the highway, with a combined rating of 28 mpg. Those figures are fairly impressive; besting figures of the 2.5-liter Ford Fusion and tying the 1.5-liter, EcoBoost, non-start-stop model. It's also beats the four-cylinder Toyota Camry's 35-mpg highway figure while tying its combined efficiency.
Stepping up to the 295-horsepower Pentastar V6 pushes the economy down to 19 mpg in the city, while the highway figure is a respectable 32 mpg for the front-driver. The combined rating for the FWD V6 is 23 mpg. Those figures can't quite match the 270-horsepower 2.0-liter, EcoBoost four of the Fusion, which nets 22 city and 33 highway. In fact, the V6 200 has trouble besting even the 3.5-liter V6 of the Camry, which returns 21 mpg city and 31 mpg highway. Again, though, the 200 is noticeably more powerful.

Chrysler recalls small number of 2013-2014 cars and trucks over engine debris

Chrysler is recalling a small number cars over issues with their 2.4-liter four-cylinder engines. The recall, which affects 522 examples of its 2013 Dodge Avenger and Chrysler 200 models, as well as 2014 Jeep Compass and Patriot CUVs has to do with potential debris in the balance shaft bearings.
The abrasive stuff can cause the oil pressure to drop, which could lead to the engine stalling or outright failure. This situation could at best leave drivers stranded and at worst lead to a crash.
Chrysler will begin notifying owners, who will need to report in to have the balance shaft module replaced. All repairs are naturally free of charge. Scroll down for the bulletin from NHTSA.

Chrysler's Hurricane engine detailed ahead of 2016 launch

We've been hearing distant rumblings about Chrysler's new Hurricane engine for some time now, but details have been hard to come by. Now, Automotive News is adding some specifics to the scuttlebutt, citing Chrysler documents. According to the industry publication, the Hurricane will blow onto the scene in 2016, but it's not an all-new engine. Rather, it will be rooted in the company's existing 2.0-liter four-cylinder Tigershark powerplant (shown above), albeit with "many new technologies to achieve excellent fuel economy."
It's not clear what sort of technologies Chrysler is referring to, but the Hurricane is expected to continue to use an aluminum block, and the finished product is expected to generate even better figures than the existing 2.0-liter's 160 horsepower and 148 pound-feet of torque (as found in the Dodge Dart). Automotive News notes that the updated 2.4-liter Tigershark debuting in the entry-level 2014 Jeep Cherokee has its basis in the 2.0-liter lump, but unlike the smaller engine, it's been fitted with MultiAir2 electrohydraulic variable valve timing to realize 184 hp and 171 lb-ft and greater efficiency.
Perhaps the Hurricane will incorporate the latter in its bag of tricks? Either way, we're hoping for a more generous torque curve than the what's in the current 2.0-liter Tigershark, which is something of a slug in the Dart - even for a base economy compact.