1993 Chevrolet Chevy S10 Pickup King Cab V6 5 Speed Nice Sharp Solid Truck on 2040-cars
Afton, Tennessee, United States
Body Type:Pickup Truck
Vehicle Title:Clear
Engine:2.8 V6
Fuel Type:Gasoline
For Sale By:Private Seller
Number of Cylinders: 6
Make: Chevrolet
Model: S-10
Trim: V6 5 Speed Sharp!! Look!!
Options: CD Player
Drive Type: 2 wheel drive
Power Options: Air Conditioning
Mileage: 198,000
Exterior Color: White
Interior Color: Blue
Warranty: Vehicle does NOT have an existing warranty
Up for auction is one 1993 Chevy S10 King Cab Pickup. This has been a project of mine for the past year or so. It is only for sale because I have acquired an S10 Blazer project and can't keep both. This truck has been my daily driver and parts hauler for my street rod business since I have owned it. I wouldn't be afraid to drive it anywhere. The truck itself has just over 198,000 miles but the engine has been replaced. I was told it was a GM replacement but I have NO proof of that all I can tell you is that at a 3,000 mile oil change the oil is still brown, not dirty and black, and that it doesn't use oil between changes. It is fuel injected and runs, drives, idles excellent. It drives like the ones I had back in the 90's when they were new. I believe it has the original clutch in it and I have not replaced that. I have spent over $3,000 on it in the time I have owned it. I intended to put a V8 in it but after seeing how good it runs and finding that it gets 24-25MPG hwy, I decided to leave the engine alone. The AC has been converted to 134a and has a VERY slow leak. It could stand Freon right now. The AC was charged almost a year ago and it has taken until now to leak down. My intent was to gas it and leave it alone since it stayed up almost a year. Under the hood is very clean and the exposed surfaces of the motor are still aluminum colored not oily and dirty. The following are the new parts I have installed since I owned it:
17x7 American Racing Torq Thrust Wheels with 215/45 and 235/55 Nexen tires ( approximately 3,000 miles )
Western Chassis 2" drop spindles
Western Chassis 2" drop coils
3" rear drop blocks
Front Brake Hoses
Front Ceramic Brake Pads
Inner and outer wheel bearings
Brake Rotors
Wheel Seals
Front Shocks
New Rear Window Rubber (Replaced Sliding Window with a flat glass)
New Pop Out King Cab Window hardware (pivots and latch hardware, screws, etc)
Tinted Windows
New Tailpipe (muffler had been replaced when I bought it)
Grille
Front Marker Lights
Front Parking Lights
Taillights
Front Smooth Bumper
Blazer Rear Bumper
Aluminum Fender Trim
Billet Specialties Shifter
Outside mirrors replaced with smaller style mirrors
It just had the oil changed and a new air filter installed
Front air dam
Drivers side door hinge pins and bushings.
The interior is what you would expect from a 1993 truck with 198K miles. The seats aren't torn but they are stained in places and the carpet also has some stains. The cloth on the door panels could stand attention. The pics of the interior are worth a thousand words.
Over all this is a really good truck you can go to a cruise in as is or you could continue to make a few improvements and have a really nice truck. It gets compliments everywhere we take it and when we wanna hit a cruise in and leave the old car at home, we have been driving the S10. Its very comfortable and cruises at highway speeds no problem. It never runs hot. It drips a small drip from the trans seal but that's all. The rearend seems to be fine and doesn't make noise.
The only problems I know with the truck are the following:
It has had the king cab jump seats removed. I intended to put the speakers in the sides of the cab but didn't get that completed
The headliner board is out and will be included so the new owner can re-cover it or LMC has the updated ABS plastic one.
It has rust (Visible but not holes) in the left lower cab corner that will need addressed if the truck is painted. Right now you don't really notice it when the truck is sitting unless you get down and look.
The AC needs Freon as mentioned above
It has its share of dings and scratches you'd expect for its age. Its had the plastic bed liner removed which shows typical rubbing on the bed ribs from the liner. The bed isn't beat up and dented up though. I had intended to do a spray in. The body has some shallow dents that aren't easy to get a photo to show and that aren't visible in all light conditions.
This is a really solid truck and I have done my best to describe it fairly and accurately. I believe in fair eBay listings. I have looked for a good king cab for a long time and this is the one I chose. That speaks for its condition. I have owned many of these. Its better than 95% of the ones you will find of its age. I wouldn't be selling it if I hadn't found an S10 Blazer just as solid. If you are local, come have a look, bring cash and someone to drive your old truck home because you will buy this truck! If you have questions call 423-823-2111 before 10PM EST and I will be glad to talk to you and/or answer your questions. I have a reserve set for the truck and the Buy It Now price. You would be hard pressed to find one then put this much new stuff on it, for the Buy It Now price.
Truck sold AS IS WHERE IS. It is for sale locally and I reserve the right to end this auction at any time. Continental US Bidders only. Shipping is the responsibility of the buyer and I will try and make it easy for your shipper to pickup as I can. Payment is by cash in person or wire transfer ONLY. Title will NOT BE RELEASED until payment is made in FULL. Thanks for looking.
Chevrolet S-10 for Sale
- Chevy s10(US $700.00)
- 1998 chevy s-10 blazer(US $3,800.00)
- 2001 chevrolet s10 ls extended cab pickup 3-door 4.3l(US $3,500.00)
- 2000 chevrolet s-10 ls 6ft bed regular cab chevy w/ cap
- Chevy s10 quad cab 4x4 nice truck no reserve
- 1988 chevy s-10 pick up(US $1,700.00)
Auto Services in Tennessee
Troy`s Auto Repair ★★★★★
Tire World & Auto Service ★★★★★
Snider Automotive ★★★★★
Simple Auto Repair ★★★★★
Safari Auto Sales ★★★★★
Roberts Auto Sales Lot 1 ★★★★★
Auto blog
GM recalls full-size truck, SUVs and vans over faulty shifter mechanism
Mon, 07 Jan 2013Twelve different General Motors vehicles from the 2013 model year, up to 54,686 units in total, are being recalled over two potential issues with their steering columns. The models in question, all full-size trucks, SUVs or vans, are the: Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Express, Silverado, Suburban, Tahoe, and GMC Savana, Sierra, Yukon and Yukon XL.
The affected vehicles were built with a fractured parking lock cable or "a malformed steering column lock actuator gear in the lock module assembly." As a consequence, they could shift out of park without the brake pedal being applied or with the key removed or in the off position.
A bulletin from the National Highway Traffic Safety Administration indicates that the recall should begin on January 17. GM will notify owners, at which time they can take their vehicles to their dealers for repair free of charge. Have a look at the bulletin below for more information.
Chevy confirms Corvette Stingray Convertible for Geneva
Thu, 07 Feb 2013Want proof that General Motors has increased global ambitions for its 2014 Chevrolet Corvette Stingray? It's staging the world premiere of the model's convertible variant at the Geneva Motor Show early next month.
As previously rumored, the droptop rendered above will debut at the Swiss show, making its first appearance anywhere on March 5. According to Susan Docherty, president and managing director of Chevrolet, the location makes sense because Corvette "...is an icon that has long been recognized and admired even in countries where it's never officially been offered."
While neither Chevrolet nor the Corvette has a major sales presence in Switzerland, the Bowtie's European headquarters is located in Zurich (about three hours to the northeast of Geneva) and GM has made it clear that it wants to build the Chevrolet brand up across Europe.
UAW to vote on strike at Kentucky Corvette plant
Tue, 08 Apr 2014The current wait time for a new Chevrolet Corvette Stingray is well, not short. With word of a strike at the Bowling Green, KY factory responsible for seventh-generation sports car, though, that wait time could end up growing substantially.
Now, a strike is still a ways off. UAW Local 2164, which represents the 800 workers responsible for screwing the Corvette together, is set to vote on authorizing a strike today, but even if the employees give the action a go, it's far from a sure thing. According to The Tennessean, both regional and national union officials would need to put their stamp of approval on strike action.
"The membership has to vote to strike, but it's just a step in the process," said Gary Casteel, the UAW's Region 8 director and one of the people that would need to authorize a strike action. Casteel told The Tennessean, "It's purely a local situation, though. They are having some issues with the local management."