1972 Chevrolet Nova Pro Street Project Bbc 396/350 Boxes Of New Parts Included on 2040-cars
Dacula, Georgia, United States
Vehicle Title:Clear
Make: Chevrolet
Drive Type: AUTO
Model: Nova
Mileage: 12,345
Trim: SS clone
Where do I begin ? I've owned this Nova for nearly 12 years and in that time it has sat more then anything due to slow shops and other projects. The previous owners did a nice job overall with the car and the drive train had less then 5k at the time I purchased it. I drove the nova here and there as purchased until the rear end went out. Orignally the car had leaf springs and air shocks so I had a reputable shop go through the rear end with new axles a detroit locker w/ 4:30 gears ladder bar suspension and added a 8pt cage. Only took 3 years to get the Nova back and alot of cash but it was done right. I enjoyed the Nova for less then 6 months and a few hundred miles when I decided to upgrade the Nova again. I commisioned a Body shop to pull out the drivetrain shave the fire wall rebuild the front end and do paint and body work. After depositing half for the work three years go by when I get a call the shop is closed and the Nova need to be picked up asap.I dropped off a running and driving car only to get the Nova back in pieces. Over the last two years since getting the car back I've only had the time to get the Nova to where you see in now in the pictures. The Big Block 396 and turbo 350 is in.I freshend the motor with new gaskets and paint oil pan and oil pump. I left the long block alone after a careful inspection as it has less then 6000 miles and ran great. I would estimate HP around 350-375. The Hooker ceramic Headers are new as well as the electric water pump and pullies. The March billet powersteering pump is used. Holley 700CFM Doublepumper is new. The 350 trans shifts smooth but hard so I left it untouched.The firewall was shaved and the subframe blasted and painted.The front suspension consist of Gobal west upper and lower control arms QAl adjustable coilovers.Unisteer power Rack and pinion and a Hellwig 1 1/8 swaybay.CPP 13 inch Big brake kit with dual pistons calipers and CPP master cylinder and proportional valve.That's over $3000.00 in front suspension& brake parts. Ididit polish tilt column,billet steering wheel with adapter and half ring all new $1000.00. Not shown but included are the hood fenders and inner fender wells. The paint is far from show fair at best but will still shine after a coat of wax. There are dings and scratches and a few rust bubbles by the back bumper and bottom fenders. Floorpan will need a patch on the drivers side toe board.The last pictures shows a pair of 31x18x20 Mickey Thompson tires that sell for nearly $1000.00 they will only be included in the buy it now price.
Chevrolet Nova for Sale
- 1971 chevrolet nova ss street strip 600 real hp very clean and solid!(US $19,500.00)
- 1962 nova pro street
- Super rare super sport 1963 nova # match motor color & trim correct w/ buckets
- 1969 nova super sport big block
- 1977 chevrolet nova base sedan 4-door 5.7l(US $1,750.00)
- 1977 chevrolet nova base coupe 2-door 5.0l 56559 original miles original paint(US $7,500.00)
Auto Services in Georgia
Young`s Upholstery & Seat Covers ★★★★★
Vic Williams Tire & Auto ★★★★★
United Auto Care ★★★★★
Unique Auto App ★★★★★
Ultimate Benz Service Center ★★★★★
Transmission For Less.Com ★★★★★
Auto blog
GM recalls full-size truck, SUVs and vans over faulty shifter mechanism
Mon, 07 Jan 2013Twelve different General Motors vehicles from the 2013 model year, up to 54,686 units in total, are being recalled over two potential issues with their steering columns. The models in question, all full-size trucks, SUVs or vans, are the: Cadillac Escalade, Escalade ESV, Escalade EXT, Chevrolet Avalanche, Express, Silverado, Suburban, Tahoe, and GMC Savana, Sierra, Yukon and Yukon XL.
The affected vehicles were built with a fractured parking lock cable or "a malformed steering column lock actuator gear in the lock module assembly." As a consequence, they could shift out of park without the brake pedal being applied or with the key removed or in the off position.
A bulletin from the National Highway Traffic Safety Administration indicates that the recall should begin on January 17. GM will notify owners, at which time they can take their vehicles to their dealers for repair free of charge. Have a look at the bulletin below for more information.
GM sweetens military discount for Buick, Chevy and GMC
Sun, 06 Oct 2013American servicemen and women interested in a new vehicle from Chevrolet, Buick or GMC now have a bit more incentive to head down to their local dealer, as General Motors has announced plans to improve its military discount program.
The new GM Military Discount Program offers eligible consumers a new Chevy, Buick or GMC at invoice pricing, which in some cases can take very large chunks out of a car's retail price. When factored in with other incentives, most of which are available with the Military Discount, the bargains are thick on the ground for members of the US armed forces.
GM's Retail Sales and Marketing Support general manager, Chuck Thomson, said, "GM has long supported the military and military families, and we hope this simplified and enhanced discount will show our appreciation for their service and help make it easier for them to own one of our great new vehicles." The program is open to all active duty and reserve members in the Army, Navy, Marines, Air Force, National Guard and Coast Guard, as well as veterans that have been out of the service for less than a year. Military retirees and their spouses are also eligible for the discount.
UAW to vote on strike at Kentucky Corvette plant
Tue, 08 Apr 2014The current wait time for a new Chevrolet Corvette Stingray is well, not short. With word of a strike at the Bowling Green, KY factory responsible for seventh-generation sports car, though, that wait time could end up growing substantially.
Now, a strike is still a ways off. UAW Local 2164, which represents the 800 workers responsible for screwing the Corvette together, is set to vote on authorizing a strike today, but even if the employees give the action a go, it's far from a sure thing. According to The Tennessean, both regional and national union officials would need to put their stamp of approval on strike action.
"The membership has to vote to strike, but it's just a step in the process," said Gary Casteel, the UAW's Region 8 director and one of the people that would need to authorize a strike action. Casteel told The Tennessean, "It's purely a local situation, though. They are having some issues with the local management."