1968 Ford Mustang Base Hardtop 2-door 4.7l (make Offer) on 2040-cars
Wetumpka, Alabama, United States
|
I am selling a 1968 Ford Mustang Coupe project car that was born on April 16,1968 in Dearborn Michigan. It was the 180,214th Mustang produced in the year 1968. The original exterior color is Acapulco Blue Metallic. The original interior was light blue crinkle vinyl with dark blue kiwi vinyl. It is a "C code" car, meaning it has the 289 V8 with the 2V carburetor. The transmission is the C4 automatic transmission. It has a 2.79:1 rear end gear ratio. The rear shocks are air adjustable. The car was running and driving a couple months ago. It turns over but it is currently NOT running. But we strongly believe the engine should be able to run fairly easy. We believe the problem is it needs a new ignition coil and points. There is some rust. Floor pans will need to be patched in places and replaced in other spots, possible quarter panel replacement, battery tray will need to be replaced. On the bright side, the front and rear frame rails appear to be strong as well as the trunk floor and the seat risers. Tires hold air and the brakes are not locked up and they are working, so loading onto a trailer will not be a problem. All parts are there except for some interior pieces. Some minor bodywork has been started on the fenders. This is a GREAT PROJECT CAR that is NOT running but should not take much at all to have her running as we had her running and driving like a champ just a couple of months ago. Again, this car is a solid foundation for a project. Asking $2,500 or best cash offer. Sold as is with no warranty. Bill of sale only. I hold the right to end auction early as I am also selling it locally. $500.00 deposit due within 3 days and remaining balance and pickup within 7 days.
|
Chevrolet Impala for Sale
2012 ford mustang gt premium 5.0 6-speed manual 26k miles
2007 chevrolet corvette ron fellows edition
1994 chevrolet corvette base hatchback 2-door 5.7l(US $6,900.00)
Black mercedes-benz c-280 98,000 miles(US $4,000.00)
1999 porsche boxster 2d convertible black 2.5l 5 speed los angeles region(US $11,444.00)
2001 ford mustang gt convertible 2-door 4.6l
Auto Services in Alabama
United Auto Repair ★★★★★
Transmission Doctor and More ★★★★★
Townsend Roadside Assistance ★★★★★
Tire Express ★★★★★
Stadium Grill ★★★★★
Radiators Inc ★★★★★
Auto blog
Was the C7 Corvette cut from Beyonce's Super Bowl halftime show?
Tue, 05 Feb 2013Someone was bound to receive a free 2014 Chevrolet Corvette Stingray during the Super Bowl XLVII festivities; it just wasn't who we thought it was going to be. Despite a report back in December that superstar Beyoncé Knowles would be getting an all-new Corvette during her halftime performance, that turned out not to be the case. Joe Flacco, starting quarterback for the Baltimore Ravens, did in fact win a Corvette for his MVP performance.
So what transpired that prevented Beyoncé from rolling on stage in the new Chevrolet? Anyone who knows isn't telling, but according to Yahoo! Autos, General Motors said that for one reason or another a deal "did not work out," and it appears to have been an eleventh-hour change. Regardless of who's to blame or what prevented this from happening, we're sure Chevy has had no problems getting attention for the C7 Corvette since it was introduced last month.
Experimental mid-engine XP-819 Corvette going up for auction
Sun, 17 Feb 2013It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.
Corvette Stingray designer lists five goals of new exterior shape
Fri, 12 Apr 2013Redesigning an icon is a difficult task, especially when you've got a blank sheet of paper in front of you and the all-new C7 Chevrolet Corvette Stingray is intended to be your final objective.
General Motors has released a new short video featuring Kirk Bennion of the Corvette's exterior design team, talking about the challenges of sculpting Chevrolet's new flagship sports car and the five goals the team had to keep in mind as it worked. In the end, Bennion's team had the pleasure of seeing their hard work take center stage as the Corvette captured the world's eyes at the Detroit Auto Show earlier this year.