1965 Chevrolet Impala Ss Original All Numbers Matching Air Conditioning Restored on 2040-cars

Auto blog

2014 Chevy Silverado priced from *$24,585, V8 gets better economy than Ford EcoBoost V6

Chevrolet has thrown down the next hand in the pickup truck poker wars and revealed at least a couple of potential aces - depending on which numbers matter most to you. The 2014 2014 Silverado 1500 with its 5.3-liter EcoTec3 V8 gets 335 horsepower and 383 pound-feet of torque, is mated to a six-speed automatic, can tow 11,500 pounds with the optional Max Trailer Package and costs the same as the outgoing Silverado, $24,585 (*including $995 destination fee). Chevy says the Silverado also stands atop the fuel economy charts when comparing any competitor with a V8 engine - and some competitors with V6 engines. The two-wheel drive model returns 16 miles per gallon city, 23 mpg highway, 19 mpg combined in two-wheel drive guise and 16 mpg city, 22 mpg highway and 18 mpg combined as a four-wheel drive.
For context around those numbers, the most fuel efficient V8-powered 2013 Ford F-150 pickups lose about two mpg in every metric compared to the Silverado, the 3.5-liter V6 EcoBoost returning 16 city, 18 highway and 22 combined in two-wheel drive. However, that EcoBoost does have 365 hp and 420 lb-ft of torque. You can get a Ram 1500 with a 3.6-liter V6 that gets 25 mpg highway, but it has 305 hp and 269 lb-ft of torque. The 2013 Ram with the 5.7-liter Hemi V8 and its 395 hp and 407 lb-ft drops one mpg in every category to the Silverado. Its tow rating is 200 pounds beyond its nearest competitor, the F-150 with the Max Trailer Tow Package.
Elsewhere, the new Silverado gets a quieter cab with a redesigned interior, a new bed with improved load-management possibilities, disc brakes all around, tweaked steering and suspension, along with free standard scheduled maintenance for two years or 24,000 miles.

GM tinkering with Silverado, Sierra model mix amidst strong early sales

Variety, as they say, is the spice of life. That's a lesson that is currently being taught to General Motors, because despite a strong showing from its 2014 Chevrolet Silverado and GMC Sierra, the General's pickup sales still can't best those of cross-town rival Ford.
With 59,163 trucks moved, GM fell just over 1,000 units short of toppling Ford, and one of the main reasons for that, according to GM's chief sales analyst, was due to a lack of variety in the engines and body styles available on dealer lots. "We are still over-weighted toward crew-cab V8 trucks. Our light-duty mix will moderate over time as our launch progresses," said Kurt McNeil.
Loading dealers with the popular combination of the 5.3-liter V8 and the four-door, Crew Cab body style was intentional during the truck's launch, but as supplies of leftover 2013 models, which are being sold at heavy incentives, are beginning to wane, both budget-conscious and high-dollar buyers are looking elsewhere instead of at the volume model pickups.

GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch

According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.