Find or Sell Used Cars, Trucks, and SUVs in USA

2010 Chevrolet Corvette Zr1 W3zr 2dr Coupe on 2040-cars

US $29,200.00
Year:2010 Mileage:7780 Color: Gray /
 Black
Location:

Tampa, Florida, United States

Tampa, Florida, United States

More details at: benitabsspotted@wolvesfans.com .

Specs:
2010 ZR1 Cyber Grey with ebony 3ZR interior

Driveline:
Makes 750whp/700tq ish.(have seen readings as high as 770...cold day) You could gain 30 more hp/tq if you retune for the synergy intake. Car runs on 93 pump gas….. Motor build just cost me $20k…my loss your gain
My stock motor started frying its rings at 6950 Miles. I had the motor pulled and had Chad Golen at Golen race engines build a full brand new motor to be setup for HPDE use.(600 ish miles currently) The old block had some cylinder scoring, so I bought a brand new LS9 bare block and had it machined exclusively for this build.
Titanium Intake/Exhaust valves
Heads Race ported and polished
Got a fully ported blower and snout from Drew (Zbestz@straightline performance)
Block is custom wiseco pistons on Factory titanium rods and crank
Katech Oil pump
NW 102 TB
Lingenfelter CAI
160* thermostat
LPE Snout with 2.6 pulley
LPE 14% lower damper
Kooks 2” Jet hot coated headers
Kooks Xpipe (no cats)
Corsa Sport exhaust
Mild Cam

Tranny:
RPS XPS Triple Carbon Clutch
Tick Master Cylinder- (Give the car a heavy clutch pedal, but dead hooks on the track)
Remote bleeder

Dual Catch Cans- One Mighty mouse(dirty side), one Elite engineering(clean side)

Fluids- Car is still currently running Joe Gibbs racing Break In oil. I usually run Redline racing oil and change all fluids every 3 hpde’s or 500 miles, whichever comes first. Obviously, haven’t got it there with this motor. All other fluids are fresh.
Brakes and clutch are all running Castrol SRF

Cooling: (I have every cooling mod they made short of running an ice tank in the rear)

C&R Intercooler bricks ($1500)
Straightline/Drew’s intercooler package- Car has a driver side and passenger side expansion tank, a front mounted fuel rail cooler and the factory tank, holding 2 gallons more than stock
LPE/Stewart Warner High performance intercooler pump- Just installed
Magnusson intercooler
LG ZR1 radiator

Suspension:

GM T1 Sway Bars
Gm T1 Springs
Slighly Modified Pfadt Aggressive street Alignment (-2.0 up front 1.6 rear)
Pfadt Solid Tranny Mounts (no more missed 3rd gear)
Elite Engineering Thermal insulated Tunnel Brace
New Brake Pads installed on all 4 corners at 7100 miles, used pads included as well

Interior:

Brey Krause Fire extinguisher Mount with extinguisher
SharkBar Harness bar
Headliner currently removed for helmet clearance (I’m 6’5), but included
Gm Suede/blue stitch Steering wheel, shifter boot and shift knob


Exterior:

Hood has ACS Composites hood vent professionally painted Matte Black(I still have the original window if you really want it)
Tires are currently Pilot Super Sports (Not PS2’s). and are under 800 miles old on chrome OEM ZR1 rims.
APR GTC-500 Wing mounted on the hatch deck- Hatch still works, but need support when open due to the weight of the wing
APR Carbon rear Splitter
Tow Hooks Front and rear
Factory front splitter and side skirts (in good shape, but not perfect)
Clear Bra (actually Invisishield) ON front slitter, Front bumper, Almost front half of hood and front fenders- Doing a great job on keeping track debri at bay.

Auto Services in Florida

Zip Automotive ★★★★★

Auto Repair & Service, Truck Service & Repair
Address: 5630 Maloney Ave, Sugarloaf
Phone: (305) 292-6915

X-Lent Auto Body, Inc. ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 1422 9th St W, Siesta-Key
Phone: (941) 747-0686

Wilde Jaguar of Sarasota ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 4821 Clark Road, Tallevast
Phone: (941) 924-3019

Wheeler Power Products ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Machine Shop
Address: Julington-Creek
Phone: (904) 317-8099

Westland Motors R C P Inc ★★★★★

Used Car Dealers, Wholesale Used Car Dealers
Address: 3699 NW 79th St, Miramar
Phone: (305) 696-1116

West Coast Collision Center ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting, Automobile Body Shop Equipment & Supply-Wholesale & Manufacturers
Address: 1444 Alternate Hwy 19, Holiday
Phone: (727) 937-5196

Auto blog

2014 Chevrolet Corvette Stingray Convertible gives us a couple of looks

Sat, 02 Mar 2013

Put away your pixel paintbrushes, kids. Pack up your Photoshop. This is the real-deal 2014 Chevrolet Corvette Stingray Convertible in its first official images. The droptop Chevrolet will roll into the bright lights of the Palexpo exhibition at next week's Geneva Motor Show, a four-wheeled statement of intent that General Motors is serious about taking its Corvette franchise global.
Chevy isn't providing anything in the way of further details with these two shots, but we've learned at least a couple of things about the car shown here. First off, the example seen in these images is fitted with the optional Z51 Performance Package - something that isn't immediately evident because there's no sign of the coupe model's prominent ductwork on its rear haunches. In order to accommodate the power folding hard tonneau cover, the vents that feed the transmission and differential coolers have been relocated to the underside of the car. The dark paint color on this example also does a good job of muting the contrasting black front fender vents and hood opening - Z51-spec design details that have proven to be somewhat controversial.
One other thing to note: These two shots also display the Stingray wearing different alloy wheels than the split five-spoke design shown at the hardtop's Detroit Auto Show unveiling in January. The simpler, thin five-spoke wheels should do a good job of showing off the Z51's upgraded brakes, and they'll be optional on the coupe as well.

"Turbo" Chevrolet Camaro is a 700-HP fantasy car come to life [w/video]

Thu, 07 Feb 2013

For a concept car built to promote an animated movie about a snail that wants to go racing, this thing ain't half bad. The outsized monster you see before you started life as a Chevrolet Camaro ZL1, and then went through a big-time Hollywood makeover before being positioned on the Chevrolet stand here in Chicago.
This 2013 "Turbo" Camaro Coupe is getting the promotion machine ratcheted up for a new DreamWorks tale by the name of, you guessed it, Turbo. Coming this summer, the movie will follow one snail's quest to become a race driver worthy of making the cut at the Indy 500. Like many DreamWorks vehicles before it, we're guessing that the petrolhead snail will star in a movie that adults (especially racing fans) with have no trouble watching with their kids. Check out the trailer below to see if you agree.
As for the car, we're told that it is "instrumental" in transforming Turbo from snail into racer. Helping the beastly pony car in this mighty task, is an ankle-cracking front splitter matched by a ungodly huge rear wing out back, a COPO hood and a supercharged (yes, supercharged) V8 engine making more than 700 horsepower. 24-inch wheels all the way around - 10-inches wide in front and 15-inches wide in back - should allow the "Turbo" Camaro to hook up with ease, as well.

Why does the Corvette Stingray have so many vents? Here's why

Sun, 27 Jan 2013

Just looking at the new 2014 Chevrolet Corvette Stingray, it's not hard to see that the car's design was created with aerodynamics at the forefront, but Chevrolet designers point out exactly what went into designing the iconic coupe in a pair of recently released videos. The videos show the Corvette going through early design phases, including clay models and wind tunnel tests, as well as talking to the car's chief engineer, Tadge Juechter.
Both videos help explain various aspects of the C7 Corvette, but it's the aero tuning of the car that is most interesting. This includes extra attention paid to the lower air dam and vented hood to help reduce drag and lift, while the rear quarter inlets are for differential and transmission cooling. Juechter said that some of these aero-tuned elements were inspired from GM's involvement in racing.
If you have about five minutes and you can't get enough information about the new 'Vette, then check out the videos posted below.