1964 - Chevrolet Corvette on 2040-cars
Adelanto, California, United States
1964 Corvette Coupe L84 327 375HP PB, being sold without the fuel injection unit. Engine: It has a 327 fully rebuilt. Old parts used inside the engine are the crank, rods, block and heads. All other parts inside block were replaced. I built this engine to speck, solid cam (Duntov 30/30) factory hi compression pistons and all other needed bits & pieces. Outside the engine I used the original starter (date coded) Water Pump, Fuel Pump and deep sump oil pan. I had the engine rebuilt with a winters intake and holly carb. This combination dynode out at 375HP @6400 RPM. The modifications on this engine are, distributor changed to electric pickup, rocker arms upgraded and the valve studs changed to thread in units. I have a complete and restored fuel injection unit with K66 ignition that I was going to sell with this car, but changed my mind. If interested in this setup, email me. Transmission : 4 speed, M21 close ratio Rear : Was a 456 Posi rear. When I pulled it for a rebuild, I changed the ratio to 411. Fully rebuilt with under 200 miles on it. Suspension : I replaced the front sway bar end links, rear shocks, rear spring and end links. The tires have less than 1000 miles on them. Every thing else has unknown wear/miles on it. Body: It now has a good coat of silver on it, but it was dark blue (Daytona Blue) when it left the factory. The emblems are shinny, but have some paint loss. Sometime before I owned this car, someone had all the wheel wells flared out. When this was corrected back to a factory look, the job wasn't done so well. Although the paint is good, the body would be considered driver quality. Interior: Now black, the factory color was two tone, Dark Blue and White. The current seat covers are a little worn with slight rips on the upper inner sides of them. The carpet is a bit faded and the door panels look good. I had the steering collum rebuilt and the dash wiring harness replaced a while back. Misc : I had the engine harness replaced with the engine rebuild. I replaced the headlamp wiring to remedy a headlamp that wouldn't open properly. I replaced the alternator with a 130 amp unit. It really makes a difference on the brightness of the tail lamps. The license plates on the car have been updated to old black plates though the state DMV and come with the car. Runs/Drives: Starts up easy, idles well, runs good. Has Power brakes, stops good for 4 wheel drum brakes.
Chevrolet Corvette for Sale
Chevrolet corvette alloy(US $2,000.00)
Chevrolet corvette stingray(US $2,000.00)
Chevrolet corvette lingenfelter performance engine(US $10,000.00)
Chevrolet corvette l48(US $2,000.00)- Chevrolet corvette base hatchback 2-door(US $2,000.00)
Chevrolet corvette standard(US $2,000.00)
Auto Services in California
Zoe Design Inc ★★★★★
Zee`s Smog Test Only Station ★★★★★
World Class Collision Ctr ★★★★★
WOOPY`S Auto Parts ★★★★★
William Michael Automotive ★★★★★
Will Tiesiera Ford Inc ★★★★★
Auto blog
Autoblog Podcast #327
Tue, 02 Apr 2013New York Auto Show, Jim Farley interview, 2014 Chevrolet Silverado fuel economy, Ford fuel economy app challenge
Episode #327 of the Autoblog Podcast is here, and this week, Dan Roth, Zach Bowman and Jeff Ross talk about this year's New York Auto Show, Chevrolet's latest assault in the pickup truck fuel economy battle, and Ford's reward for developing a better fuel economy app. Dan also has an interview with Ford's Jim Farley about the future of Lincoln. We wrap with your questions and emails, and for those of you who hung with us live on our UStream channel, thanks for taking the time. Keep reading for our Q&A module for you to scroll through and follow along, too. Thanks for listening!
Autoblog Podcast #327:
2014 Chevrolet Malibu gets more torque, more room and inspiration from the Impala
Fri, 31 May 2013The 2014 Chevrolet Malibu, having stared at the Impala across the showroom floor for a year, gets nips and tucks all over inspired by its larger brother. The 2.5-liter four-cylinder in the base car will get a stop-start system and 23 city miles per gallon, 35 highway, each number representing a one-mpg improvement over the 2013 car. Output is 196 horsepower and 186 pound-feet of torque.
Opt for the 2.0-liter turbo and, while power holds steady at 259 hp, torque goes up by 14 percent to a striking 295 lb-ft (a figure Chevy calls best in the class). The final details include newly programmed transmission shift points and faster shifts, for better engaging and enjoying the added power.
Looks-wise, the grille's been reshaped to be more in line with the new Chevrolet look, a narrower upper grille hovering over a larger lower grille.
Watch this time-lapse build of the Chevy SS for NASCAR
Fri, 08 Feb 2013There's only about a week left until we get our first look at the production version of the 2014 Chevrolet SS sedan, but Chevrolet NASCAR teams have been looking at the race version of the car all winter. Autoweek has posted a really neat time-lapse video showing just a portion of what it takes to build one of NASCAR's new Gen6 stock cars.
Though the video is quite brief, it does show almost the entire build process starting with just the car's nose, and it gives us a good look at how integral the template is to the final product. As a bonus, Hendrick Motorsports also provided some videos showing two of its teams performing pit stop tests over the winter. The second video shows some of the more detailed aspects of the racecar's rear end, including the stock-looking trunk cutout and a newly mandated rear bumper extension that will be used on super speedways like Daytona and Talladega.
To see what Team Chevy has been up to all off-season, check out all three videos posted after the jump.