1972 Chevrolet C10 Cheyenne 4 X 4 Pickup 1/2 Ton 350 V8 Long Bed Truck on 2040-cars
Denver, Colorado, United States
|
This iconic truck would make an excellent restoration project, and does not need much to return it to original. This is a 1972 Chevrolet C10 Cheyenne 4x4 1/2 ton pickup truck with a 350 engine in good condition, roadworthy and ready to go with new fluids and filters. The transmission was professionally replaced and converted to 4 X 4 at some point. It has the original orange paint with some scratches,dents, and fading. The quarter panels have a four inch by four inch piece of metal that was removed on each side. The bench seat has some wear, and seat belts are different colors.
This truck was purchased by my father from AJ's Transmissions in 2000 and he used it as a daily driver mainly for short trips to work. The truck had to have the VIN reassigned by the state of Colorado because it was reported stolen in 1976 and the VIN plate removed. The VIN inspection and reassignment paperwork are all provided. Original VIN is CKE142F352702. The odometer reads 47,790 and actual mileage is unknown. Title is clear. Here is some information from Wikipedia: Several changes occurred in 1971. First came another new grille
design (the "egg crate") for Chevrolet trucks and black paint over
portions of the GMC grille. Second, an additional trim package was introduced:
the Cheyenne. On GMC models, this was referred to as the Sierra. These packages
consisted mostly of comfort features — nicer interiors, more padding and
insulation, carpet, chrome trim, and upper and lower side molding and tailgate
trim. 1971 was the first year for AM/FM radios factory
installed. Finally, the front brakes on all light-duty trucks were switched
from drum brakes to disc brakes, resulting in much less brake fade under heavy
use. While many prior C/K half-ton trucks had used a six-lug bolt pattern (6 x
5.5") for the wheels, two-wheel-drive models switched to a five-lug
pattern (5 x 5–inch bolt circle) common to Buick, Oldsmobile, Pontiac, and Cadillac passenger cars. The
1/2 ton 4 x 4 retained the 6 lug bolt pattern. This bolt pattern would remain
the standard through the end of the C/K series (along with the Chevrolet/GMC
vans). Also, Chevrolet changed the 396 V8 emblem designation to 400 V8 The 1972 models were virtually identical to 1971 models, with the only change being the rear view mirror was glued to the windshield instead of being bolted to top of the cab, and metal or vinyl-covered flat door panels were no longer available; all trim level door panels were molded plastic with integral armrests and wood grain inserts on Cheyenne and Sierra trim levels. For restoration, it should also be noted that the door and window cranks were slightly longer due to the molded plastic door panels, and the vent windows were now secured with a single screw on the inside of the door, thus differentiating it from the 1971 model year. The majority of 10 and 20 series Chevrolet trucks from 1967 to 1972 were built with a coil spring trailing arm rear suspension, which greatly improved the ride over traditional leaf springs. However, the leaf spring rear suspension was still available on those trucks, and standard on 30 series trucks. The front suspension on all Chevrolet trucks were independent front suspension with coil springs. GMC models came standard with leaf springs with coils springs optional; all four-wheel drive models (Chevrolet and GMC) had leaf springs on both axles. 1967 was the only year for the "small rear window" (RPO A10 offered a large rear window as a factory option[3]). The standard drive train came with a three-speed manual transmission and one of two engines; the 250 in3 straight six or the 283 cu in (4.6 L) V8. The optional transmissions were the four-speed manual, the Powerglide and the Turbo-Hydramatic 350 and 400. The 292 six and the 327 in3 V8 were the optional engines. The 1/2 ton trucks came with a 6 x 5.5–inch bolt pattern, the 3/4 and 1 ton trucks came with an 8 x 6.5–inch bolt pattern. |
Chevrolet Cheyenne for Sale
1972 chevrolet truck. small block 350. built for nitrous but never sprayed.
454 big block-swb-short bed-22" steelies-automatic-new tires
1971 chevrolet c10 colorado truck! 350 automatic trans runs great!(US $7,500.00)
1977 chevrolet cheyenne c-20 3/4 ton 4x4 350 4-speed no reserve!
1971 chevrolet c10 cheyenne custom sport pickup truck 350 auto factory a/c
1973 chevy truck
Auto Services in Colorado
We are West Vail Shell ★★★★★
Vanatta Auto Electric ★★★★★
Tim`s Transmission & Auto Repair ★★★★★
South Colorado Springs Nissan ★★★★★
Santos Muffler Auto ★★★★★
RV Four Seasons ★★★★★
Auto blog
C7 Corvette turbo with 1,000 horsepower promised from Hennessey
Mon, 25 Feb 2013If you can't wait for the next-generation Chevrolet Corvette ZR1, Hennessey says they will have you covered. The Texas-based company has announced it will offer a spate of upgrades for the 2014 Corvette ranging from a range of bolt-on options all the way up to a 1,000-horsepower, twin-turbo system. Buyers can start with a cold air intake, cat-back exhaust or stainless steel long-tube headers, but Hennessey says it will also offer up three stages of forced induction mayhem should those bits and baubles not provide enough thrust.
Those choices start with a supercharger system good for up to 700 hp, though Hennessey will gladly ditch the blower in favor of two turbos. Doing so will spin the crank to the tune of 800 horsepower all the way up to a certifiably ludicrous 1,000 ponies. There's no word on how much these tricks will cost you - or when they will be available, as we're guessing they haven't gotten their hands on the car yet - but you can head over to the Hennessey site to drop them a line if you're curious.
GM looks to combat high theft rates on SUVs with added tech
Tue, 24 Dec 2013The Cadillac Escalade has been at or near the top of most-stolen and insurance-loss lists for more than seven years, until it dropped to number six earlier this year. In 2011 it was fitted with a host of new security features to address its easy-to-override features and that has brought the number of thefts down, but when eight of the ten most stolen rides are large SUVs from General Motors, no one will argue that something else needs to be done.
Thus, GM has fitted this same theft-deterring tech to the 2015 Suburban, Tahoe and Yukon. The Suburban and Tahoe will get the steering lock that the Escalade and Yukon already get, plus bolted-down third-row seats to deter thefts like this, stronger door lock cylinders and shields, and side-cut keys to inhibit picking.
Additional security measures in a Theft Protection Package can be purchased for $395, consisting of sensors on the greenhouse glass and interior, an incline/tilt sensor and added "key control systems" to make it more difficult for the men in black balaclavas to steal what you bought.
GM recalls 8,500 Chevrolet Malibu models for rear suspension glitch
Mon, 04 Feb 2013According to a letter from General Motors to the National Highway Traffic Safety Administration, flaws in the build process of the 2013 Chevrolet Malibu have led to the recall of 8,519 cars. Units built between December 6, 2011 and January 15, 2013 may have been assembled with rear suspension cradles that had insufficient torque applied to certain bolts. That out-of-spec assembly could lead to issues ranging from slight noises to a loss of vehicle control.
The problem was first noticed in December of last year by a GM test fleet driver and eventually tracked back to the improperly torqued bolts on the suspension cradle assembled through July 2012 by a supplier located not too far from the Malibu's Detroit/Hamtramck Assembly Plant. Since an official NHTSA recall notice has not been issued yet, it isn't clear whether or not Detroit-built Malibus were the only ones affected (the 2013 Malibu is also built at GM's Fairfax Assembly Plant in Kansas City, Kansas). Dealers will fix the problem by inspecting vehicles for proper torque specs, retightening if not within specs and, in some cases, perform a rear-wheel alignment.