Find or Sell Used Cars, Trucks, and SUVs in USA

1967 Chevelle Super Sport Project , Real 138 Car With Tons Done Already.... on 2040-cars

US $14,000.00
Year:1967 Mileage:100000
Location:

Pittsfield, Massachusetts, United States

Pittsfield, Massachusetts, United States

967 Chevelle ss396 real deal , vin#138 , 350hp 4 speed project car....

BODY
This car has had a TON of body work already done to it...The body itself is 90% finished and straight as an arrow...No rust or rot in this car it has all been removed or replaced professionally...
New Cowl hood
New drivers door 
New passenger door 
New Radiator Support
New floors
New trunk
New inner fender well
1 nos fender well

The car has been frame off already and is back on the frame, all new poly bushings were installed , frame blasted and painted ..Body still has it original quarters , when we got the car it had cheaters over the factory quarters , so we pulled them off...Low and behold the originals were in great shape except for a couple minor dents so we straightened them out the right way (have pics) , the inner wheel houses and everything else was beautiful too!!The front fenders are original to the car and are in Very nice condition...car was in primer when we got it into the shop but we took it back down to bare metal to see what we were working with , this car is rust free...we rust shielded all the inner quarters and stuff so never have to worry about it again..

The body needs a final sand then its ready for paint!!!

When we bought the car we were told it had the original motor and transmission!The transmission was at a shop being rebuilt when the owner passed away so it might come up it might not at this point according to previous owner!Sucks really, bad situation..
Trans is not included . obviously if i can get it at some point , you are welcome to it , but at this point you are buying the car without it...

The motor we were told was original has been decked so there is no 100% way to prove it or not!!
I did however run the numbers off everything on the motor and it all looks correct to the car, the old guy who owned it had no reason to lie about it , he owned the car since it was new...Told me the motor had been decked at one point and he put it into a Street rod while he was having the chevelle restored , the motor did come with some weird motor mounts..Her is how the motor numbers break down from my research......

Engine casting number on back of block...
3902406-- Late 66-67 only , 396ci 325hp - 375hp


Cylinder heads
3904390 -- 1967 396ci 325-350 hp 


Holley 4 barrel intake (factory cast iron)
3866948 -- 1967 396ci 350hp

Distributor number
1111170 ---- 1967 396ci 350-375hp

Water pump pulley
3890419 CT bbc /w AC

Crank Pulley --
3874414 396 325-350hp w/ ac

Bell housing 
389962

............................trim tag data is as following ................

11D 
ST 67-13817 ..............ATL............6568 ......... BODY
TR 763-B......................................F-F...........PAINT
........W 2LC.................................
.... 5Y-157237........................................................

Marina blue w/ Black bucket interior , built in 4th week november 66 

all the other engine dates are around the same time frame give or take a couple weeks.....

Motor...
All together and has been freshened up recently according to previous owner ...It turns over nicely and has great compression.....

Rear is 10 bolt that didn't come with the car......

I have a ton of parts for this car including
Gm original bumpers that have been re-chromed 
4 speed center console with clock in great shape (paid $600 at swap meet)
Another 4 speed console top plate w/ clock ( original )
all new stainless pre-bent brake lines
All new disc brake kit in the boxes, car has factory disc's on it now...
all the emblems 
Couple grills 
tons of trim
all the clutch and shifter parts
just a lot of stuff really check out the pictures its a little overwhelming to write......


INTERIOR
I have the complete interior , in not too bad of shape , front buckets , rear seat , all the arms rest's , "Factory cluster w/ gauges" , obviously the center console , everything is here....Its needs attention or re-done but i have it all...........

Car has a ton of potential in the right hands , its real Big block 67 chevelle , one of the HOTTEST cars in the muscle car game Right now and will be forever....This is my dream car but i just dont have the time right now and alot of things going on.......That's it no other stories...



I also have a 1968 Camaro w/ fresh paint ,Porsche red , fresh 383 stroker ,Muncie 4 speed , everything new , 85% finished just needs some plumbing finished and some trim work....I'll take $15k for that one too....Over $25k invested...

If your looking to build your dream car , here it is....
pro touring car 
Pro street ( hate to cut it up)
Street rod


car sold as is obviously , it s a complete project car... it comes with a ton of parts....

any questions please feel free to email me...

This one is going to hurt to see go , i had huge plans for this car......I paid almost $15k for it before we did the body work and bought some of the parts so im taking it on the chin , the way it goes if you dont finish them!!!

I have transferable paperwork for the which is fine for any state to get it on the road....

Thanks ....


On Apr-23-14 at 06:33:39 PDT, seller added the following information:

I also have the original passenger door , its actually in pretty good shape besides a hole on the bottom corner where they all get it...Your welcome to it also..

I have a bunch of duplicate parts also that i was picking from swap meets etc just to have.. 


On Apr-27-14 at 17:54:38 PDT, seller added the following information:

I just wanted to say thanks to every one for all the interest and offers....

I understand its not cheap to have a car shipped home so i just lowered the buy it now $500 to help a little with that...
Yes its big project but 90% of the hard work is done , this body is phenomenally clean and rust free..There is no hidden surprises , it is solid!! Very close to being ready for paint , Its in primer with a final guide coat on it now..Hasn't been exposed to the weather since put into primer.. The car has been guide coated and blocked twice already , i was going for a Very straight car..
Its a 67 Chevelle super sport , it deserves the effort for sure in my opinion..


Hopefully that answers some of the questions..

I will help out on my end any way i can for shipping etc..

Again ,thanks guys !! 





Auto Services in Massachusetts

Woodlawn Autobody Inc ★★★★★

Automobile Body Repairing & Painting
Address: 9 North St, Jamaica-Plain
Phone: (781) 963-6629

Tri-State Vinyl Repair ★★★★★

Automobile Parts & Supplies, Automobile Seat Covers, Tops & Upholstery, Automobile Accessories
Address: East-Longmeadow
Phone: (413) 782-0335

Tint King Inc. ★★★★★

Auto Repair & Service, Window Tinting
Address: 505 Middlesex Tpke Unit# 22, East-Boston
Phone: (978) 670-2927

Sturbridge Auto Body ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting, Towing
Address: Auburn
Phone: (508) 347-7469

Strojny Glass Co ★★★★★

Auto Repair & Service, Glass-Auto, Plate, Window, Etc, Windshield Repair
Address: 92 Weir St, Mansfield
Phone: (508) 824-8671

Sonny Johnson Tire ★★★★★

Auto Repair & Service, Tire Dealers, Tire Recap, Retread & Repair
Address: 621 Pond St, South-Weymouth
Phone: (781) 849-3077

Auto blog

2013 Chevy COPO Camaro announced with two new engines and manual option

Thu, 07 Mar 2013

Chevrolet is following up the 2012 COPO Camaro with another limited run of the drag-strip-ready production car for 2013. Ditching the superchargers, the 2013 COPO Camaro can only be equipped with one of three naturally aspirated V8 engines, and other new features include the option of a manual transmission, new front springs, some minor styling changes and a lower starting price of $86,000. All cars are designed to abide by the rules of the NHRA's Stock Eliminator or Super Stock classifications, depending on in which series buyers wish to enter their Chevrolet Camaro.
Returning for 2013 is the 427-cubic-inch V8 producing 425 horsepower, but the new engines include a 325-hp 350-CID V8 and a 375-hp 396-CID V8. Buyers can select to purchase all three engines, and each will be matched with the sequence number of that car; the track-only COPO cars will not have vehicle identification numbers and can't be registered for street use.
Chevrolet is also offering unique enthusiast-specific options such as a COPO Build Book and the opportunity for owners to help assemble their car's engine at the Chevrolet Performance Build Center in Wixom, MI.

Pushing Back: GM expanding Chevrolet into Korea, Daewoo out

Thu, 29 Apr 2010

Chevrolet Camaro goes to South Korea - Click above for high-res image
General Motors decided several years ago to begin heavily promoting Chevrolet as its global mainstream brand even in markets where its existing brands like Opel and Daewoo were a dominant force. Today, at the Busan Motor Show in South Korea, GM Daewoo president Mike Arcamone announced that the Camaro would lead the way in GM's efforts to market Chevrolet in South Korea.
For now at least Chevrolet and Daewoo-branded vehicles will coexist in the Korean market. However, while we were in China last week GM officials told us that the Daewoo brand, which has been somewhat tainted by past quality issues, would eventually be phased out in favor of Chevrolet. When the new Aveo launches next year it will likely be badged as a Chevrolet even though GM Daewoo is in charge of engineering the car.

2014 Chevrolet SS makes its live debut

Sat, 16 Feb 2013

Chevrolet showed off the new 2014 SS in an airport hangar last night, its first rear-wheel-drive performance sedan in the US since the Impala SS from 1997. We'll have more to say about the SS later today, but this is the sedan that Chevrolet sees as the final piece in restoring its performance credentials. For those of you looking for a manual transmission, however, that wish will go unfulfilled - at least for now: the only two options buyers will have are the color and whether or not they want a sunroof.
We'll work on getting some more angles (in better light) today at Daytona International Speedway, but with fans seeing the car for the first time, we don't hold out much luck of getting a clear shot. So for now, enjoy the high-res gallery above.