Up for auction is my 1987 Chevrolet V20 3/4ton 4x4 pickup which came from factory fully loaded with the Silverado package. I bought the truck 6 years ago from the second owner who bought it in 1988. During the past 6 years I have taken the time to do multiple upgrades, basically every part of the drivetrain is either rebuilt or brand new. I absolutely love this truck, but the reality of it is I need a crew cab to comfortably fit my growing family. The list of improvements is long, I will do my best to do a break down of every aspect of it. I would say that the only downside is the paint. It has what I would consider a decent drivers quality paint job. It's showing general wear, scratches, and what I consider minor dents, the worst dent is on the passenger side door, see picture. All that being said it still draws compliments on a weekly basis. On the plus side this truck lived most it's life in Southern Oregon and is 100% rust free. This truck has always been adult owned, it has never been wheeled, thrashed or abused. Being a huge advocate of preventative maintenance, I have always kept up on oil changes and other basic up keep. I even went as far as replacing both door strikers and dome light switches in the door jamb.
The most notable part of this truck is the Vortec 5.7L 350 conversion. Back in 2010 I started having significant issues with the original TBI motor. After weighing my options trying to find the greatest power and reliability for my money, I came across a wrecked 1997 chevy van with a GM Good Wrench Motor in it. At the time it was wrecked the motor only had 40,000 miles on it. I took the motor and had the wiring harness modified to be stand alone. I was able to do a clean functional swap, the motor looks like it was there from factory. I was even able to instal the Vortec computer under the dash where the original TBI computer resided. I rebuilt the entire fuel delivery system to accommodate the higher fuel pressure the Vortec needs to run. Vortecs require roughly 64 pounds of fuel pressure where the original TBI only needed 7-12 PSI. The truck now has one in line fuel pump capable of an 80 PSI output, complete with an inline fuel filter just prior to it. The truck runs flawlessly off of either of the two 18 gallon saddle tanks. I also installed a K&N cold air intake, and a single 3" exhaust with a flowmaster muffler with a high flow "honeycomb" style catalytic converter to comply with Oregons DEQ requirements. This truck has a strong and powerful sounds thats not obnoxious. When I installed the motor I also replaced the stock core support and grill with one from a 1990 silverado suburban, giving it the more modern look. Also it has a brand new 104amp alternator with dual batteries.
The Vortec is backed by a 700R4 transmission that was completely rebuilt prior to being installed. It was gone through front to back, including a new H.D. torque converter, new clutches, new pump, etc and I put a B&M deep oil pan that holds 4 extra quarts of fluid. The 700R4 is a great fit for this truck, it has the lowest ratio first gear available from any GM transmission while also having an overdrive gear that lets the truck cruise comfortably at 70 MPH. I purchased a stand alone wiring kit from Bowtie Overdrives and opted for the optional tow/lock kit. This kit allows the driver to flip a switch that locks the torque converter, giving you better power delivery while building less heat. I also installed an auxiliary transmission cooler with a 10" electric fan to assist with cooling. I also modified the gauge cluster and installed a transmission temperate gauge in the lower left hand corner, see pic above. It has an NP 241C transfer case.
I replaced the rear "semi- floater" axle with a full floater corporate 14 bolt axe. Prior to putting it in the truck I upgraded the drum brakes with a rear disc brake kit I bought from the 4wd factory. This kit uses brand new 1979 eldorado cadillac style calipers with Emergency brake capabilities. I also replaced to lighter duty 10 bolt front axle with a "big hub" dana 44. Before installation I completely disassembled and rebuilt it, including all new bearings, axle u joints, inner axle seals, tie rod, drag link, rotors calipers, brake pads, and lines. Both axles are open (non-posi) and have 4:10 gears.
The truck has a custom 3" suspension lift, using new stock style front leaf springs with drop perches and lengthened shackles. I initially had conventional style lift springs up front that caused horrible bump steer while pulling a trailer or hauling my camper. The drop perches are built out of 1/4" thick steel, and utilize the factory perch mounting holes. I saved all the stock hangers, shackles and the superlift lift springs, so if you don't like the custom mounts all that can be easily reinstalled. It has 2.5" blocks in the rear with firestone "ride-rite" airbag overloads. I just had the rear driveline lengthened to compensate for the lift and balanced by driveline specialties of Portland Oregon. While I had that apart I installed a new slip shaft bushing in the transfercase.
The interior has been upgraded as well. It utilizes the dash pad and gauge bezel from a 1990 silverado suburban, The door panels are brand new, and the seat was re covered to match the door panel cloth inserts. Also when the seat was recovered I had new foam installed as well. I customized the head liner to make use of the suburbans grab handles and visors, passenger side visor is complete with vanity mirror that even lights up! I also grafted in an overhead center console from a 2005 chevy silver ado. Its great place to store your wallet and the map lights are functional. All the power windows and door locks work, the passenger side window opens a bit slow however. I took the time and replaced all of the window weather seals and anti-rattle strips, theres no air leaks in this trucks cab! I recently replaced the Air conditioning condenser, manifold, evaporator and system oil but have not yet had a chance to have it evacuated and charged. It also has a tilt column with the 1990 sport style steering wheel. It also has a trailer brake unit, pioneer cd/mp3 satellite capable head unit with ipod hook up, eclipse amp and 3 way eclipse component speakers.
The truck also has in bed wiring for a camper/fifth wheel and comes with custom made frame mounted camper tie downs that work great.
As I had mentioned before the only thing lacking in this truck its a new paint job. That being said I have been stock piling all kinds of parts these last 6 years in preparation. Included with the purchase of this truck is
-Brand new carpet kit, with enough to do the back cab wall behind the seat.
- Good used GM front fenders hood and doors. It was my intention to prep the body panels prior to paint, reducing down time. It's my daily driver.
-NIB tinted sliding rear window with gasket
-NIB power window regulators with motors.
- new silverado badges
-Powder coated hood hinges.
I would not hesitate to hop in this truck and cruise across the country, it is solid, reliable and runs great! You can go two ways with this truck, leave it as is and enjoy a solid comfortable daily driver or do what i no longer have time for and top it off with the pain job that it deserves, making it a true one of a kind head turner. I've tried to describe this truck to the best of my abilities, if you have any questions please do not hesitate to ask. I have set the reserve at what I feel is a reasonable price considering its age and what all has been done to it. $500 deposit do within 48 hours of auctions end. My time is valuable as I'm sure yours is, please only bid with the intention to buy. This is being sold as is, no warranty expressed or implied. Paypal or cash payment, no checks or money orders. I can help arrange shipping if needed but only upon receiving full clear payment. Pic 9 is the truck when I first got it. The camper (pic 10) does NOT come with the truck, it has been long ago sold its just an example of how the camper tie downs work. Thanks for your consideration.
Chevrolet C/K Pickup 2500 for Sale
Auto Services in Oregon
Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 19095 SW Teton Ave, Hillsboro
Phone: (503) 691-2558
Automobile Parts & Supplies, Automobile Salvage, Towing
Address: 29850 Kelso St, Coburg
Phone: (541) 688-0330
Auto Repair & Service, Automobile Body Repairing & Painting, Automobile Customizing
Address: 3451 25th St SE, Independence
Phone: (503) 967-5154
Auto Repair & Service
Address: 6208 NE Killingsworth St, Boring
Phone: (503) 287-8772
Auto Repair & Service, Gas Stations
Address: 1590 Willamette Falls Dr, Mulino
Phone: (503) 655-2377
Auto Repair & Service, Auto Oil & Lube
Address: 4380 Silverton Rd NE, Silverton
Phone: (503) 378-7976
Auto blog
Mon, 29 Jul 2013
General Motors hadn't had a recall in India since 1995. That changed when it was discovered that certain employees were playing tricks with local emissions testing in order to ensure passing grades for engines. More than ten GM Powertrain employees in India and the US have been let go over the ensuing emissions flap, including Sam Winegarden, VP of global engine engineering, a man who has been with the company since 1969, leading development of some marquee powerplants.
According to Automotive News, an internal investigation revealed that employees "violated testing procedures," sometimes swapping specially prepared low-emissions engines during testing regimes for the Chevrolet Tavera SUV equipped with the 2.0-liter and 2.5-liter engines. Employees were also manipulating weights in order to get vehicles placed into different emissions categories. The discovery has led to GM recall the 114,000 Taveras produced over an eight-year period and halting their production and sale.
The Economic Times of India reports that the issue is due to "a faulty component." GM has developed a solution to the issue, and once it is validated in testing and approved by the Indian authorities, the recalled vehicles will be fixed at dealers and production will resume.
Thu, 21 Feb 2013
Allow us to be the first to extend our condolences to our friends to the north. General Motors has announced the 2014 Chevrolet SS will not be available in Canada. The Globe and Mail reports the automaker has confirmed the high-performance sedan won't hit Canadian dealers, though GM hasn't offered up any reasoning as to why that is.
Buyers here in the US of A, meanwhile, can look forward to getting their hands on the 415-horspower, rear-wheel drive SS by late summer. Something tells us it won't be long after that before Canadian officials start seeing individually imported 6.2-liter V8 four-doors in their neighborhoods. Fortunately, Canadian buyers will still be able to take home the 2014 Chevrolet Corvette. The C7 bowed at the Canadian International Auto Show last week, reportedly drawing sizable crowds and interest.
Mon, 11 Feb 2013
The formula of Top Gear Korea is seemingly about the same as it is everywhere else in the world, including the flagship British original: involve interesting cars in fantastical situations with charismatic hosts. That prescription has proved to be pretty reliable over the years, and has lead to some truly memorable and exciting pieces of television.
Something like that was undoubtedly what the Korean producers were after when they lined up this segment - a drag race between a Chevrolet Corvette ZR1 and an AH1 Cobra military helicopter. The planners almost certainly did not expect the filming of the segment to go quite as wrong as it actually did, with the helicopter actually crashing into the dirt after the "drag race" had been completed. Thankfully, we're told that no one was seriously injured in the crash, but the footage, in the video below, is pretty damn chilling to watch, nevertheless.
2010 2500 lt 6.6l diesel duramax**no reserve*** 7k miles mint cond..z71. 1 owner
Chevy 3/4 ton long bed, monster truck 44" tires, 350 corvette eng. 9000 k miles
72 chevy pickup 1 ton 4x4 frame off restoration
2004.5 duramax diesel, ext cab, short bed
1998 chevy c2500 pickup
Fully custom 1996 chevy 500 hp 3/4 ton 4x4