Find or Sell Used Cars, Trucks, and SUVs in USA

68 Chevy C10 Step Side on 2040-cars

Year:1968 Mileage:5000
Location:

Randleman, North Carolina, United States

Randleman, North Carolina, United States

I have a flat red bagged Chevy truck that lays on the ground. Everything has been replaced from front to back

Body: this truck is painted viper red base coat clear coat with a flattening agent in the clear to give it the satin finish. the entire body was been media blasted: I replaced the rockers and cab corners and I shaved the drip rail, I frenched in a smooth gas cap to get rid of the factory one. I shaved the vents out of the wiper cowl and I removed the wiper arm assembly but it can be replaced. I shaved the entire fire wall and did away with the factory heat and make the pass side match the drivers side, I also shaved the drain channel at the top of the fire wall. I put outer skins on the doors and shaved the handles and bought a new header panel and tailgate for the bed. Inside the bed is all spikes to replace the bolts that hold the wood in place, wood and stainless strips are all new as well. All front sheet metal is new a also. The sunroof was in the truck when I got so I left it. The rear fenders have been radius cut 3 inches to clear 22's and still bolt up factory

Engine:
Rebuilt 350 with a 488 lift cam and everything is chrome and/or billet. Block is painted base coat clear coat red to match the truck, rebuilt 700r4 transmission with a lockout kit for overdrive to work properly and a new driveshaft. Transmission is sitting on a tubular crossmember as well. Aluminum 3 core radiator with billet overflow and red top optima battery

Suspension:
Frame is painted the same viper red as the truck with shinny clear coat, front clip is painted and rear clip is painted, I did not paint under the cab itself. Front frame is z'd 5 1/2" to lay out on the ground with gussets front and rear to support the work involved. The rear has a big c notch so it will lay out also. The front suspension is out of a '80 model truck so it would be 5 lug and have disc brakes, the hydro boost brake setup is off the same donor truck, rearend is from the same '80 model donor truck and was blasted and painted along with rear disc brake conversion as well. All the suspension is painted house of color Orion silver and clear coated along with the hydroboost pump on the fire wall, wheels are 22x9.5 hello front and rear with painted inserts to match with 245/30/22 tires

Auto Services in North Carolina

Walkers Auto Repair ★★★★★

Auto Repair & Service
Address: 5996 Springs Rd, Hiddenite
Phone: (828) 569-1227

Viking Imports Foreign Car Parts & Accessories Inc ★★★★★

Automobile Parts & Supplies, Automobile Manufacturers & Distributors, Automobile Body Shop Equipment & Supplies
Address: Polkville
Phone: (704) 374-0222

Vans Tire & Automotive ★★★★★

Auto Repair & Service, Shock Absorbers & Struts, Automobile Air Conditioning Equipment-Service & Repair
Address: 1003 W Roosevelt Blvd, Stallings
Phone: (704) 289-3668

Union Automotive Services Inc ★★★★★

Auto Repair & Service
Address: 1224 Waxhaw Indian Trail Rd, Waxhaw
Phone: (704) 821-5547

Triangle Service ★★★★★

Auto Repair & Service
Address: 653 Doctor Donnie H Jones Jr Blvd E, Kenly
Phone: (919) 936-4921

Todd`s Tire Service Inc ★★★★★

Auto Repair & Service, Tire Dealers, Mufflers & Exhaust Systems
Address: 1825 Lee Ave, Broadway
Phone: (919) 775-5649

Auto blog

GM investing $167m in Spring Hill for new midsize vehicles

Tue, 06 Aug 2013

General Motors has announced a large investment in its Spring Hill, Tennessee facility. The former home of Saturn production will be getting a $167 million addition to a previously announced $183 million, to cover a pair of new midsize vehicles. The investment is expected to create 1,800 jobs at the factory.
That $350 million is being divvied up for a pair of programs at Spring Hill. The first will take the bulk of the money ($223 million) and create 1,000 of the 1,800 jobs, while the other will take the remaining $127 million and generate the leftover 800 positions. But GM says the investment will cover "midsize vehicle programs." So what could they be?
The leading candidate in our minds is a new crossover for Buick, called the Anthem, that will slot between the Encore and Enclave, but will be slightly smaller than the Equinox and Terrain. As we've explained, the new model will likely be the first product to sport GM's new D2UX platform, which will eventually replace both the Delta and Theta platforms. Spring Hill is already building the Equinox, so there could be some credence to this theory.

GM applies for LT5, LTX trademarks... are new small block variants coming?

Mon, 29 Apr 2013

Recently discovered General Motors trademark applications for LT4, LT5, LT88 and LTX have observers wondering what kind of high-performance offerings could be on their way. A new LT4 would mark a return of the engine designation first used on the Corvette Grand Sport, SLP Pontiac Firehawk and SLP Chevrolet Camaro SS from 1996 and 1997. Supposition at Corvette Forum - which provided advance intel on the C7 like these leaked images - believes a new LT4 could go into the high-performance trim of the next-gen, 2015 Camaro that would be more powerful than the 580-horsepower Camaro ZL1.
Seeing an LT5 again would also be déjà vu - in its former life it was a 5.7-liter V8 for the C4 Corvette ZR-1 from 1990-1994 designed by Lotus, producing from 370 hp to 405 hp. A mix of rumor and hope is that the new LT5 will be a supercharged evolution of the 6.2-liter LT1 (pictured) placed in the new C7 Corvette, and that it will go into the C7 version of the ZR1 pumping out something like 700 hp.
The LTX trademark is, as with that last letter, a complete mystery. If the "X" isn't a generic way to denote the whole LT family, it's wondered if it LTX could refer to a crate motor offering like the LSX.

2014 Chevrolet Corvette Stingray Convertible gives us a couple of looks

Sat, 02 Mar 2013

Put away your pixel paintbrushes, kids. Pack up your Photoshop. This is the real-deal 2014 Chevrolet Corvette Stingray Convertible in its first official images. The droptop Chevrolet will roll into the bright lights of the Palexpo exhibition at next week's Geneva Motor Show, a four-wheeled statement of intent that General Motors is serious about taking its Corvette franchise global.
Chevy isn't providing anything in the way of further details with these two shots, but we've learned at least a couple of things about the car shown here. First off, the example seen in these images is fitted with the optional Z51 Performance Package - something that isn't immediately evident because there's no sign of the coupe model's prominent ductwork on its rear haunches. In order to accommodate the power folding hard tonneau cover, the vents that feed the transmission and differential coolers have been relocated to the underside of the car. The dark paint color on this example also does a good job of muting the contrasting black front fender vents and hood opening - Z51-spec design details that have proven to be somewhat controversial.
One other thing to note: These two shots also display the Stingray wearing different alloy wheels than the split five-spoke design shown at the hardtop's Detroit Auto Show unveiling in January. The simpler, thin five-spoke wheels should do a good job of showing off the Z51's upgraded brakes, and they'll be optional on the coupe as well.