1985 Chevy C-10 Short Bed on 2040-cars
Bertram, Texas, United States
It has a built 383 Stroker motor with forged pistons and crank, cammed, rocker rollers, hydraulic lifters, Built heads( I stayed with cast heads because they can handle the heat better then alum.), holly 4 barrel carb 750cfms, hdmi dis., high out put starter ,headers actuated cut outs , 350 turbo trans with a shift kit and a 2500 stall kit, brake system, chassis, full h-pipe flow master exhaust, 32 in lokar shifter, new radiator, electric fans, new tires, front bumper, loweri...ng kit, new bushings, A-arms /Front end, rear end 373 gears for the third member . Everything on this truck mechanically is new. The truck dynoed at 489hp and round the same in torque. This all has been done and the truck has about 20 miles with all the new stuff. I never drive it because I wanted to completely finish the truck the way I wanted . It needs interior and a wire harness. Engine is self contained, it fires up and can be driven .The body is solid no rust. I don't drive and built this truck to the point it is at 2 yrs.' ago. However I do start it a couple times a month and let it run for 30 mins. I have a lot of time and money in just the engine alone as well as the other things I have listed. Heres a link of the truck running or a trade for a welder (lincon pipe welder), boat, car, truck, atv or motorcycles ... doesnt hurt to ask worse i cld say is no. If I say no pls do not take offense to it. I just am not interested. 512-897-6758 Asking $8500 Bertram,tx
|
Chevrolet C-10 for Sale
- 1966 chevrolet c10 454 automatic short wheel base pickup
- 1977 chevrolet scottsdale c-10 *new 454 big block crate engine with 400 turbo*
- 1966 chevrolet c-10 swb cool truck!!
- 1969 chevrolet c10 572 truck short bed pro touring air ride bagged shop truck
- 1966 chevrolet c-10 swb very nice look!!!
- 1965 chevrolet c10 pickup base 325hp(US $18,700.00)
Auto Services in Texas
Wolfe Automotive ★★★★★
Williams Transmissions ★★★★★
White And Company ★★★★★
West End Transmissions ★★★★★
Wallisville Auto Repair ★★★★★
VW Of Temple ★★★★★
Auto blog
Corvette Stingray Shooting Brake under consideration by Callaway [w/poll]
Mon, 18 Mar 2013Callaway has released a few renderings of a design study for a shooting brake version of the C7 Chevrolet Corvette Stingray. The company says it wants to create a long-roof version of America's sports car to offer buyers more interior room and a vehicle with "unique style." The company says it will use structural carbon fiber for the new body bits, which suggests the conversion shouldn't add too much more weight to the Corvette. Along with a few mechanical tweaks, the Callaway Corvette Stingray AeroWagon could breeze past the 200 miles per hour barrier.
Provided that they get enough interest, Callaway estimates they will be able to effect the changes on the Chevrolet for around $15,000, and says the conversion work should be available through its network of dealers. You can check out the brief press release below for more information, or head over to the Callaway site to plunk down a deposit - but before you do, we want to know... do you find this C7 wagon interesting? Vote in our poll below, then feel free to leave a few lines in Comments.
View Poll
Read This: Auto Extremist advocates for Corvette as brand with multiple models [w/poll]
Fri, 25 Jan 2013The 2014 Chevrolet Corvette really grinds Peter De Lorenzo's gears. Or, more accurately, the self-anointed Auto Extremist has an issue with what he sees as mismanagement of the legendary sports car by General Motors executives. In a new editorial on his website, De Lorenzo argues it's time to split Corvette off from Chevrolet to create an all-new brand, complete with a model range with at least three new takes on the sports car. Capable of fully leveraging the successes of the Corvette Racing program and brandishing the full might of GM's technical prowess, the Corvette brand would theoretically give Porsche something to sweat over.
Sure, that sounds like a party, but given GM's troubled track record when it comes to launching (let alone managing) brands, we say that's slippery slope that could just as easily end with the whole Corvette franchise in the scrap bin. Either way, the notion is certainly an interesting one. Head over to Auto Extremist to take in the full editorial, and then let us know what you think in Comments. Should GM split off its most storied nameplate?
View Poll
Watch this time-lapse build of the Chevy SS for NASCAR
Fri, 08 Feb 2013There's only about a week left until we get our first look at the production version of the 2014 Chevrolet SS sedan, but Chevrolet NASCAR teams have been looking at the race version of the car all winter. Autoweek has posted a really neat time-lapse video showing just a portion of what it takes to build one of NASCAR's new Gen6 stock cars.
Though the video is quite brief, it does show almost the entire build process starting with just the car's nose, and it gives us a good look at how integral the template is to the final product. As a bonus, Hendrick Motorsports also provided some videos showing two of its teams performing pit stop tests over the winter. The second video shows some of the more detailed aspects of the racecar's rear end, including the stock-looking trunk cutout and a newly mandated rear bumper extension that will be used on super speedways like Daytona and Talladega.
To see what Team Chevy has been up to all off-season, check out all three videos posted after the jump.