Find or Sell Used Cars, Trucks, and SUVs in USA

1970 Chevrolet C10 Stepside Short Bed 4x4 Pickup 350/350 on 2040cars

US $12,000.00
Year:1970 Mileage:44822 Color: Bronze / Parchment
Location:

Hubbard, Oregon, United States

Hubbard, Oregon, United States
Transmission:Automatic
Body Type:Pickup Truck
Engine:350/5.7L
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
VIN: CKE142F373256 Year: 1970
Number of Cylinders: 8
Make: Chevrolet
Model: C-10
Trim: C10
Cab Type (For Trucks Only): Regular Cab
Drive Type: 4x4
Options: 4-Wheel Drive
Mileage: 44,822
Exterior Color: Bronze
Interior Color: Parchment
Warranty: Vehicle does NOT have an existing warranty
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

This 1970 Chevrolet C10 has been garaged for the last 8 years. The paint was done just before that, as well as the interior. Everything functions as it should and the truck drives nicely. The paint job is a fairly good one except for occasional runs in the clear near the bottom and it needs repair to the driver's side cab corner. There are various small flaws that require very close inspection to see. This pickup is not a show truck & isn't intended to be. It's for driving and enjoying. I was going to repair the flaws on the lower part of the body and have the local Line-X shop paint their tough bed liner material from the lower body line down around the bottom of the sheet metal, but decided to leave it be for the next owner to decide what to do with. Not everybody likes the look of the lower parts being "armor plated" (4x4's look good to me with it & it's practical), so it remains as-is. The engine is a 350 and the transmission is a TH350. The exhaust is good, & the truck doesn't need anything on the mechanical side. It does need an antenna and if you'd like side mirrors you'll have to add them. If you'd like to arrange for an inspection prior to bidding, I'd encourage you to do so for your own peace of mind. I've taken pictures of those areas where these pickups are known to have problems and have made the best attempt I can to fairly represent this pickup. Feel free to message with any questions and I'll get back to you as soon as I can. Thanks!

Auto Services in Oregon

Lithia Chrysler Jeep Dodge ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Parts & Supplies
Address: 2121 Martin Luther King Jr Blvd, Pleasant-Hill
Phone: (541) 343-1700

AutoZone ★★★★★

Automobile Parts & Supplies, Battery Supplies, Automobile Accessories
Address: 2154 W Main St, Applegate
Phone: (541) 245-5465

Lithia Toyota Scion ★★★★★

Auto Repair & Service, New Car Dealers, Automobile Parts & Supplies
Address: 163 S 9th St, Springfield
Phone: (866) 595-6470

Sonny`s Auto Service ★★★★★

Auto Repair & Service, Automobile Diagnostic Service, Brake Repair
Address: 204 5th St, Adrian
Phone: (208) 482-7565

Pro Auto Wholesale ★★★★★

New Car Dealers, Automobile Parts & Supplies, Automobile Accessories
Address: Troutdale
Phone: (503) 358-3717

Speed`s Auto Service ★★★★★

Auto Repair & Service, Automobile Inspection Stations & Services, Automobile Diagnostic Service
Address: 120 SE Clay St, Boring
Phone: (503) 233-3554

Auto blog

Final C6 Corvette built in Bowling Green

Fri, 01 Mar 2013 14:15:00 EST

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

Experimental mid-engine XP-819 Corvette going up for auction

Sun, 17 Feb 2013 13:03:00 EST

It seems to be commonplace that when a new Corvette is in development, rumors swirl about a possible mid-engine layout. As is the case of Chevy's most recent C7 Corvette, these rumors never pan out.
In any case, the idea for a 'Vette with an engine mounted behind the driver can probably all be traced back to a single car, the 1964 XP-819 prototype. Built as an "engineering exercise" back in 1964, the prototype was designed with a rear-mounted engine. History tells us that the idea of a rear-engine Corvette fizzled, and the XP-819 was eventually cut up into pieces and stored at a shop in Daytona Beach, FL.
After sitting for untold years, a restoration project started on the car, and while it isn't yet fully completed, the current owner of the car, Mid America Motorworks, will have the car on display at the 2013 Amelia Island Concours d'Elegance as a "driveable chassis" with hopes of having a fully completed car ready to bring to next year's show.

First 2014 Chevy Corvette Stingray spotted crashed in the wild

Tue, 12 Feb 2013 21:47:00 EST

This restyled blue 2014 Chevrolet Corvette Stingray is wearing manufacturer plates, and it appears to be the same one seen around the internet in various pictures lately. This crash is likely not part of the Chevrolet testing regimen, however. Digital Corvettes forum member gpetry posted the shot with a note: "got this picture e-mailed from a friend in Arizona last week..." No circumstances are given, other than the incident occurred in the thick of a set of curvy roads, and the coupe ping-ponged off a guardrail and into the rock wall. Hopefully everyone involved in the incident walked away.
It may not be a pretty thing to see, a crashed sports car that's not even available for sale yet, but rest easy. Many pre-production cars are used for development and then unceremoniously crushed and scrapped, anyway. If that's the case here, that makes this wrecked 'Vette less of a tragedy and more of a case of exceptional efficiency.