1963 Stepside Swb Custom Chevy Truck on 2040cars
Memphis, Tennessee, United States
Body Type:Pickup Truck
For Sale By:Private Seller
Interior Color: Tan
Number of Cylinders: 8
Drive Type: Automatic 350
Options: Leather Seats, CD Player
Exterior Color: Maroon
Warranty: Vehicle does NOT have an existing warranty
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ...
I have a slick 1963 Chevy Pickup for sale. Restoration cost 20k. The truck is maroon in color, looks awesome! Everywhere I go in the truck people stop and stare. The truck has a 327 under the hood (lots of chrome), 350 transmission, all leather custom interior, tilt bed, wood paneling along the bed, new shocks , new springs, new battery, all gauges work except speedometer and shows 39 miles on it, has cd player, recently installed exhaust pipes. I bought the truck from a guy who bought it from the original owner who spent over 20K on this truck. I have not done anything to the truck, what you see is what you get. Looks like someone fix the truck from the frame up, as you can see on the pics the entire frame has been primed and painted. Lots done to this truck, runs and drives great. Has a few chips on the paint here and there but nothing major. Rims have a bit of corrosion on them, not a lot though. Wood in bed is not treated and shows wear and cracking, may have to be replaced. Tilt bed works fine with switch behind driver seat. Lots of new parts. Wood railing comes off very easily if it is not your style. Has disc brakes in front and drums in the back. Any questions please feel free to ask, I will answer as best I can since I bought the truck like it sits. The truck is located in Memphis TN and buyer is responsible for shipping costs. I will require a $800 dollar deposit within 48 hours of end of auction. I do have a reserve set on this auction. Thanks for looking and good luck bidding. I will try to get a video of the truck soon.
Chevrolet C-10 for Sale
Auto Services in Tennessee
Auto Repair & Service, Automobile Parts & Supplies, Automobile Accessories
Address: 8609 Norris Ln, Clinton
Phone: (865) 922-2751
Auto Repair & Service
Address: 673 W Main St, Hendersonville
Phone: (615) 264-3537
Auto Repair & Service, Tire Dealers, Tires-Wholesale & Manufacturers
Address: 171 Highway 2 NE, Guys
Phone: (662) 286-5438
Auto Repair & Service, Automobile Parts & Supplies, Automotive Tune Up Service
Address: 5406 Main St, Spring-Hill
Phone: (931) 486-3557
Automobile Body Repairing & Painting
Address: 320 Watson Rd, Rosemark
Phone: (901) 840-2277
Auto Repair & Service
Address: 1701 Highway 79, Bumpus-Mills
Phone: (931) 232-4499
Tue, 17 Aug 2010 11:28:00 EST
2010 Buick Enclave - Click above for high-res image gallery
Thu, 13 Dec 2012 10:49:00 EST
The summer of 2010's recall hit parade continues unabated today, with General Motors having just announced that it is asking 243,403 owners of its 2009-2010 Lambda crossovers to bring their three-row haulers in for inspection. The culprit? Second-row seat belts in select Buick Enclave, Chevrolet Traverse, GMC Acadia, and Saturn Outlook CUVs have "failed to perform properly in a crash."
According to GM, a second-row seat-side trim piece is to blame, as it can impede the upward rotation of the buckle after the seat is folded flat. As a result, if the buckle makes contact with the seat frame, cosmetic damage can occur, potentially requiring additional force to operate the buckle properly. So far, no great shakes, but in the process of applying that additional force, the occupant may push the buckle cover down to the strap, potentially revealing and depressing the red release button. As a result of this, the belt may not latch, or in certain cases, it may actually appear to be latched when, in fact, it isn't.
General Motors has finally dropped the curtain on the 2014 Chevrolet Silverado and 2014 GMC Sierra. Both trucks have undergone substantial revisions with updated versions of the company's 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 engines. In a shot across the bows of both Ford and Chrysler, GM says it won't use a V6 engine adapted from passenger car applications. Instead, it developed the 4.3-liter engine based on its proven truck-duty architecture.
Tue, 08 Apr 2014 13:58:00 EST
All three mills will boast direct injection fuel systems as well as a new cylinder head design. Combined with a revised piston, the new engines feature a smaller combustion chamber with a compression ratio of 11:1 or higher depending on the application. Cylinder deactivation and continuously variable valve timing are all part of the recipe, and each engine is paired with a six-speed automatic transmission with auto grade breaking. So far, no fuel economy or horsepower figures have been released, though GM says the new engines will best their predecessors in both areas.
Outside, the trucks feature a number of enhancements to reduce drag and wind noise, and GM claims both the Silverado and Sierra will offer buyers some of the quietest cabins in the class. Extended cab models now feature front-hinged rear doors to allow easier access to the back passenger area, and Crew Cab buyers can now select between a five-foot, eight-inch bed or a six-foot, six-inch bed. Buyers with a mind toward going off road will also rejoice in the return of the Z71 package, complete with Rancho shocks, front tow hooks and additional under-body protection.
The current wait time for a new Chevrolet Corvette Stingray is well, not short. With word of a strike at the Bowling Green, KY factory responsible for seventh-generation sports car, though, that wait time could end up growing substantially.
Now, a strike is still a ways off. UAW Local 2164, which represents the 800 workers responsible for screwing the Corvette together, is set to vote on authorizing a strike today, but even if the employees give the action a go, it's far from a sure thing. According to The Tennessean, both regional and national union officials would need to put their stamp of approval on strike action.
"The membership has to vote to strike, but it's just a step in the process," said Gary Casteel, the UAW's Region 8 director and one of the people that would need to authorize a strike action. Casteel told The Tennessean, "It's purely a local situation, though. They are having some issues with the local management."