Find or Sell Used Cars, Trucks, and SUVs in USA

1952 Chevy Sedan Delivery Panel Van 283 4 Spd Chevelle Rear - Restorable Rat Rod on 2040cars

US $4,500.00
Year:1952 Mileage:80000 Color: Primer
Location:

Flint, Texas, United States

Flint, Texas, United States
Body Type:Sedan Delivery
Engine:283 V-8
Vehicle Title:Clear
Year: 1952
Mileage: 80,000
Make: Chevrolet
Exterior Color: Primer
Model: Bel Air/150/210
Number of Cylinders: 8
Trim: chrome
Drive Type: 4 Speed
Condition: Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ... 

Up for auction is my 1952 Chevrolet Sedan Delivery panel van which I initially put a lot of work into. It started life as a 6 cyl. which threw a rod and ended up in a closed down wrecking yard in town. I salvaged it and added a 283 small block with double hump heads, cam, clear distrib. cap, etc. It did have a 4 barrel double pumper and intake but it started acting up and I switched it over to a 2 barrel carb and intake I already had. I tried to keep it running and started off and on through the years till a couple of years ago. I have also kept it in primer the best I could to keep it from becoming too overly rusted. It has a Saginaw 4 Speed , shortened driveshaft and 1972 Chevelle 10 bolt rear-end, Gratiot Auto Supply front motor mount kit, Electric frame mounted fuel pump, Chevrolet Truck tandem master cylinder for the clutch and brake system, a Ron Francis wiring harness was installed with a smaller custom foam grip steering wheel. One guage panel was missing when I acquired it. The rear bumper is off the car but included ( they are both rusty). I installed real hardwood flooring in the rear, sanded and stained. Started putting panel board around the inside and top of the van to have something to attach carpet to.    This panel van originally had a window cut into the passenger rear side ( to see out better??) when I bought it, so I tack welded in a piece of flat metal from a 1957 Chevy hood and fiber-glassed over it. It looked good till a couple years ago when the weather started working on it. The fenders and body are mainly in very good shape, the hood has a strip tacked to it down the nose that warped the hood in a couple spots. The grille is rusted over now-see pictures. I have all the side chrome pieces I took off this car when I started working on it back in 1976. The glass would need to be replaced as some windows have chips cracks, etc. The rear door glass is good though. I have the original keys to the doors and the ignition. The passenger door is stuck now for some reason as I couldn't get it to open last time I tried.    The fenders and body are solid but the metal would have to be sanded really smooth to make it look nice again. The front floor boards are rusted out and would have to be replaced. As you can see in the pictures I have been using it for storage for parts of my other car projects. (sorry it takes away from the picture of the actual car)   The front bushings and king pins were replaced the first year or two I had it as was the gas tank taken out, cleaned and internally coated for rust prevention.  The motor has sat a few years without being cranked but last Summer I could turn the crank manually, but the oil on the dipstick is getting milky looking from condensation getting in it. (I've had the motor covered up with plastic in case the hood let water through at the center seam).  This is one reason I need to sell it before it ruins as I am losing my storage space and would rather see someone else get some use out of it as I've only got to drive it one time since I did all the work on it. I got sidetracked on it due to getting married, kids and a divorce as well as having too many other projects going at the same time.  It would make a nice cruiser, custom, Rat Rod , El Camino?? or Gasser with a Straight Axle under the front end and I'd like to know someone actually would get to finish this car and enjoy it as it should be!  I have a clear title to this car and the Winning bidder is to pay a deposit through Paypal and to pay the remaining amount with CASH ONLY when picking up the vehicle. This auction is for serious bidders only and must realize they are Responsible for picking up and hauling off the vehicle within a reasonable amount of time as I am losing my storage space for it. Also --The rear brakes may be locked up or rusted to the drums as we had trouble in the past trying to park it in the spot it is in now- had to drag it. The aluminum mag wheels are in okay shape but most of the tires are flat and may not air up. It uses 5 lug chevy 14" or 15" rims.  Since I've described this car to the best of my knowledge and knowing the amount of work in getting it restored, I am selling it AS-IS.

Auto Services in Texas

TLS Auto Specialist ★★★★★

Auto Repair & Service, Auto Oil & Lube, Automotive Tune Up Service
Address: 13301 Trinity Blvd Ste 101, Irving
Phone: (817) 354-0007

Chris Automotive ★★★★★

Auto Repair & Service, Used Car Dealers, Wholesale Used Car Dealers
Address: 9407 Alberene Dr, Alief
Phone: (713) 778-0911

Blaine`s Motor Supply ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Engine Rebuilding
Address: 4700 Scyene Rd, Lancaster
Phone: (214) 426-4400

Ken`s Muffler & Repairs ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Mufflers & Exhaust Systems
Address: Rhome
Phone: (214) 826-2620

Wilson Paint & Body Shop ★★★★★

Automobile Body Repairing & Painting, Truck Body Repair & Painting, Truck Painting & Lettering
Address: 125 N Waco St, Hillsboro
Phone: (254) 582-2212

ANW Automotive ★★★★★

Auto Repair & Service, Automobile Diagnostic Service, Brake Repair
Address: 10101 Montwood Dr, El-Paso
Phone: (915) 595-2778

Auto blog

Final C6 Corvette built in Bowling Green

Fri, 01 Mar 2013 14:15:00 EST

With all of the attention given to the 2014 Chevrolet Corvette Stingray lately, you could be forgiven for thinking that it's already well along in production, yet tooling up for the new C7 has only just begun. In fact, production of the outgoing C6 generation in Bowling Green, Kentucky just halted on Thursday.
As the C6 has aged, production numbers have predictably ebbed along with demand, but this year, the addition of the 427 and 60th anniversary models resulted in an uptick in vehicles built - this, despite a model year shortened by around 25 percent to accomodate the new model changeover. The final C6 Corvette ever, No. 13,466 built this year, was a white 427 Convertible destined for the General Motors Heritage Center museum. The car's 7.0-liter V8 heart was assembled by Corvette chief engineer Tadge Juechter himself.
In total, Bowling Green pushed out 215,100 C6 Corvettes over nine years. If you're still a C6 fan at heart and are hoping to get a good deal on a phase-out model, step lively - Chevrolet reportedly had about 6,100 unsold units, which Autoweek suggests is good for around five and a half months of supply at the model's current sales rates. Given that demand will likely slacken even further as the C7 draws closer, that should be a big enough stockpile to keep dealers satisfied until 2014 Stingrays begin showing up on their forecourts in December.

GM won't pay owners of recalled cars for lost value

Thu, 12 Jun 2014 16:30:00 EST

Kenneth Feinberg, the man in charge of the General Motors compensation fund dealing with the its widespread ignition switch woes, has issued an informal, two-letter response to the plaintiffs in more than 70 lawsuits seeking redress for lost resale value of their Cobalts: "No." The cases were recently combined into one, but Feinberg told The Detroit News that the fund will deal "only with death and physical injury claims," and that "perceived diminished value" will get no consideration.
ALG, the firm specializing in establishing residual values, determined that Cobalt owners had lost $300 compared to the segment competition and doesn't envision any long-term effects from the recall situation. Feinberg's statement comes in advance of public details on how the compensation fund will work and adheres to GM's long-held position on the matter. The company has already asked a judge to throw out such suits using the pre-bankruptcy defense, even as it stopped using that defense in cases of injury and death.
With plenty of potential gain from the GM suit, however, don't expect the plaintiffs to give up yet. When Toyota was sued for the same reason during the unintended acceleration debacle, it eventually settled the case for between $1 billion and $1.4 billion just to get it over with. Since the 85 law firms involved in the Toyota litigation took home more than $250 million of that total, we shouldn't expect the attorneys to give up on a GM payout, either.

Watch this time-lapse build of the Chevy SS for NASCAR

Fri, 08 Feb 2013 12:43:00 EST

There's only about a week left until we get our first look at the production version of the 2014 Chevrolet SS sedan, but Chevrolet NASCAR teams have been looking at the race version of the car all winter. Autoweek has posted a really neat time-lapse video showing just a portion of what it takes to build one of NASCAR's new Gen6 stock cars.
Though the video is quite brief, it does show almost the entire build process starting with just the car's nose, and it gives us a good look at how integral the template is to the final product. As a bonus, Hendrick Motorsports also provided some videos showing two of its teams performing pit stop tests over the winter. The second video shows some of the more detailed aspects of the racecar's rear end, including the stock-looking trunk cutout and a newly mandated rear bumper extension that will be used on super speedways like Daytona and Talladega.
To see what Team Chevy has been up to all off-season, check out all three videos posted after the jump.