1968 Fleetwood Cadillac on 2040-cars

Auto blog

Lansing builds its millionth Cadillac

Cadillacs are built at plants across North America. The Escalade is assembled in Texas, the SRX in Mexico and the XTS in Ontario. But the bulk of Cadillac's lineup - or the smaller members of the family, at least - are built in Michigan. And while the upcoming ELR will be built alongside the Chevy Volt at the Detroit/Hamtramck facility (which incidentally opened with the Cadillac Eldorado back in '86), the majority of those Cadillacs built in Michigan are handled by the Lansing Grand River Assembly Plant.
In fact, Lansing Grand River just celebrated its millionth Cadillac built. The landmark millionth vehicle is a new 2014 CTS sedan in Red Obsession Tintcoat. The facility opened in 2001 and has built Cadillacs almost exclusively since then, assembling the CTS and ATS model lines, though in a couple of years it will also handle production of the Chevy Camaro.

Cadillac could 'flourish' in Australia, says marketing chief

Cadillac might have its best product mix in recent history, and GM's luxury brand is looking to expand. In fact, it might even be making a trip Down Under, at least according to the company's global marketing chief.
Uwe Ellinghaus spoke with Australian site Car Advice at the Geneva Motor Show and said the brand could be quite successful there. "[The] goodwill that the Cadillac brand has is such a good starting base that once we get proper volume commitment and a dealer network behind it we can easily flourish," he said, though he warned that the plans are still in their earliest stages and years away. First, Cadillac will expand in markets with the highest possible sales, like China and Russia.
Ellinghaus said that the most likely models for Oz would be the SRX, Escalade and CTS; the latter would probably act as a replacement for the Holden Commodore. GM's Australian arm is ending local production in 2017, and there have been many rumors about what is happening to the big sedan. However, Ellinghaus admits exporting cars from the US to Australia is going to mean higher prices. In addition to the expense, Cadillac doesn't currently build any right-hand-drive models. It would likely take until the end of the decade before the Aussie models could be ready.

2014 Cadillac CTS images leak from somewhere

The redesigned 2014 Cadillac CTS will be unveiled this Tuesday on the eve of the New York Auto Show, but as often happens, some images of the car have leaked onto the web a few days early. Previously, the only information we had on the 2014 CTS concerned the all-new twin-turbo V6 engine that will be found underhood, rated at 420 horsepower and 430 pound-feet of torque.
While none show the new car in its entirety, the images do show much of the front end, particularly the headlights that feature vertical bars of LEDs that start down low as foglights and continue up to the top of the front fenders. They're similar to the lighting design first shown on the XTS and ATS, except the lower portions are much taller.
There are also views of the rear end and one of the taillights, as well as an interior shot of the front passenger door. The latter image has us most intrigued, as it shows some very high end materials being used in the new CTS interior. The low-gloss wood trim, in particular, looks very premium.