2002 Cadillac Deville on 2040-cars

Auto blog

Lansing builds its millionth Cadillac

Cadillacs are built at plants across North America. The Escalade is assembled in Texas, the SRX in Mexico and the XTS in Ontario. But the bulk of Cadillac's lineup - or the smaller members of the family, at least - are built in Michigan. And while the upcoming ELR will be built alongside the Chevy Volt at the Detroit/Hamtramck facility (which incidentally opened with the Cadillac Eldorado back in '86), the majority of those Cadillacs built in Michigan are handled by the Lansing Grand River Assembly Plant.
In fact, Lansing Grand River just celebrated its millionth Cadillac built. The landmark millionth vehicle is a new 2014 CTS sedan in Red Obsession Tintcoat. The facility opened in 2001 and has built Cadillacs almost exclusively since then, assembling the CTS and ATS model lines, though in a couple of years it will also handle production of the Chevy Camaro.

2014 Cadillac CTS images leak from somewhere

The redesigned 2014 Cadillac CTS will be unveiled this Tuesday on the eve of the New York Auto Show, but as often happens, some images of the car have leaked onto the web a few days early. Previously, the only information we had on the 2014 CTS concerned the all-new twin-turbo V6 engine that will be found underhood, rated at 420 horsepower and 430 pound-feet of torque.
While none show the new car in its entirety, the images do show much of the front end, particularly the headlights that feature vertical bars of LEDs that start down low as foglights and continue up to the top of the front fenders. They're similar to the lighting design first shown on the XTS and ATS, except the lower portions are much taller.
There are also views of the rear end and one of the taillights, as well as an interior shot of the front passenger door. The latter image has us most intrigued, as it shows some very high end materials being used in the new CTS interior. The low-gloss wood trim, in particular, looks very premium.

How GM's grueling 24-hour test gets the kinks out of its performance cars

One of the biggest challenges automakers face when designing a high-performance car is making sure that it is both fast and reliable. For General Motors, any car that might be taken to the track by its owner - like the Corvette, Camaro Z/28 (shown above) and the Cadillac CTS-V, for example - undergoes a rigorous and strenuous 24-hour test by engineers at the Milford Proving Grounds, as pointed out by Car and Driver.
We've posted on this topic in the past - on a video showing the Camaro ZL1 being brutalized, for instance - but this article gives a more in-depth look at what actually happens behind the scenes... including what that poor ZL1 went through. Though the test isn't for 24 hours straight, the cars are pushed as hard as possible by some of GM's best drivers with only the brakes and tires replaced frequently.
We don't want to ruin the fun for you, but it is an interesting article that tells just some of what GM does to develop its sports cars. Check out the full article over at Car and Driver for the rest of the story.