2016 Bmw M4 on 2040-cars

Auto blog

Tier 1 suppliers call GM the worst OEM to work with

Among automakers with a big US presence, General Motors is the worst to work for, according to a new survey from Tier 1 automotive suppliers, conducted by Planning Perspectives, Inc.
The Detroit-based manufacturer, which has been under fire following the ignition switch recall and its accompanying scandal, finished behind six other automakers with big US manufacturing operations. Suppliers had issues with trust and communications, as well as intellectual property protection. GM was also the least likely to allow suppliers to raise their prices in the face of unexpected increases in material cost, all of which contributed to 55 percent of suppliers saying their relationship with GM was "poor to very poor."
GM's cross-town competitors didn't fare much better. Chrysler finished in fifth place, ahead of GM and behind Dearborn-based Ford, which was passed for third place this year by Nissan. Toyota took the top marks, while Honda captured second place.

2013 BMW R1200GS and HP4 duel at Circuito de Almeria

The 2013 BMW HP4 is the track-ready version of the manufacturer's already mighty S1000RR, which puts the bike at the very tip top of the two-wheeled BMW food chain. The R1200GS, meanwhile, is intended to be a somewhat more utilitarian machine. Capable of conveying both rider and gear over vast distances and uncertain terrain, the big-boy GS is the Swiss army knife to the HP4's rapier. Or at least that's what we've always been led to believe. BMW recently rolled out some footage during a press launch that showed the R1200GS is actually no slouch when it comes time to sling around a road course.
The company threw both bikes on Spain's Circuito de Almeria for a little sparring match, and miraculously, the HP4 didn't just up and walk away from the R1200GS. From from it. Instead, the two stay tightly matched through most of the course before something surprising happens. We won't spoil the ending for you. Is it possible the rider on the HP4 still had some in reserve? Sure, but from the sound and look of things, neither bike was giving an inch. Check out all the video action below for yourself.

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.