2011 Bmw 750 4.4l Nav Cd Turbocharged , M Sport Appearance Pkg on 2040-cars

Auto blog

BMW i3 EV continues to shed camouflage

As BMW gets closer to introducing the production version of its plug-in i3, we keep seeing the hatchback being tested with lessening degrees of design-obscuring camouflage. Last we heard, BMW is expecting to have the i3 ready by the end of this year, and the swirly, blue camo does little to hide its basic design in these latest spy shots.
We get our first clear look at almost everything above the wavy beltline including the silver roof edges and matching mirror caps, and it can't hide the dip in the beltline behind the B-pillar - matching what we've already seen on the i3 Coupe Concept unveiled at the LA Auto Show last year. Another change we notice is the lower portion of camo removed from the front fascia allowing us to see the air opening and the black, vertical inserts leading up to the fog light bezels. Judging by the "Hybrid Test Vehicle" stickers on the side of this prototype, we can only assume that this is the optional range-extended model.

BMW recalling a grand total of three X3s over instrument panel defect

We've seen big recalls and we've seen small ones. Some involve millions of vehicles, and some - like the Infiniti Q50 recall on which we reported just the other day - involve just a couple dozen. But this has to be the smallest recall we've seen yet.
"Due to a production process error" in the BMW X3, states the National Highway Traffic Safety Administration in the notice below, "the team seam on the instrument panel was not manufactured correctly." Big friggin' whoop, you say? Well, NHTSA points out that it could hinder the deployment of the airbag and send fractures flying everywhere.
The problem was discovered in a select few examples of the 2013 BMW X3 - both xDrive 28i and 35i models - manufactured in the later part of February this year. And by "select few," we literally mean a few - as in three. Three examples are being recalled. If you happen to be one of those three owners, expect to hear from your local dealership.

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.