2006 Bmw 650i Convertible + Sports Package + Low Mileage (28k) on 2040-cars

Auto blog

BMW planning smaller Z2 roadster

It's been a few years since we heard about the BMW Z2, a compact, two-seat convertible that would slot in below the aging Z4 (shown above). Now, though, the crew at Car and Driver are back with details on the oft-rumored roadster.
The big shock for enthusiasts on this one is C/D's report that the Z2 will spin its front wheels, rather than its rears. A front-drive roadster is strange enough, but a front-drive BMW roadster? It's apparently true, though, as the new model would share its platform with the front-drive Mini and 2 Series Active Tourer rather than with the racier 228i or M235i coupes.
According to C/D, the rumored Z2 could be powered by a range of three- and four-cylinder, turbocharged engines, although it's more likely to be a four-only affair. Power should range from 160 to 230 ponies, while an M variant could arrive with 300 horsepower (that's a whole lot of power for front-wheel drive...).

BMW X4 order guide sneaks onto the web

Much like we gave you an early look at the ordering guide for the BMW M3 and M4 (you can now configure those two, as well), yet another list of BMW options has leaked out. This time, the upcoming X4 is the target. We told you last month that prices for the X3-sized, X6-shaped vehicle started at $45,625, and now, we can confirm everything else for the newest Bimmer.
Only two trim lines will be available when the X4 arrives - M Sport and xLine. The former starts at $2,300 for the xDrive28i model and $1,900 for the xDrive35i, and includes as standard, 19-inch wheels (or optional 20s for $950), sport seats, an M steering wheel, a more aggressive body kit, a black headliner and the option of brushed aluminum interior trim. The xLine is $1,500 for the 28i and $1,000 for the 35i, and is made up exclusively of 19-inch Y-spoke wheels and dark copper interior trim.
Metallic colors dominate the pallet, with just a pair of gloss options available alongside the $550 metal-flake colors. BMW offers a pair of SensaTec leatherette options, along side a wide variety of $1,450 leather trims.

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.