2008 Bmw 528i Sedan Auto Htd Leather Sunroof Nav 75k Mi Texas Direct Auto on 2040-cars

Auto blog

BMW working with Dainese to put airbags in motorcycle suits [w/video]

Addressing the safety concerns of its customers, BMW Motorrad is co-developing a rider suit with Dainese to feature something that's much more common in automobiles: airbags.
Starting with Dainese's D-air Protect System, which is made up of inflatable protectors that deploy in 15 milliseconds, the two companies will integrate the technology into a BMW Motorrad brand, one-piece racing suit, the DoubleR RaceAir. Later a different, street-oriented airbag system that can be retrofitted to bikes will be offered to Beemer riders.
The DoubleR RaceAir is expected to be presented at the EICMA motorcycle show in Milan in November, after all required crash testing has been completed.

BMW calls in 50,000 motorbikes over fuel pump leak

If you don't often see motorbikes being recalled, it's probably because there's less to go wrong on a motorcycle. But a problem with the fuel pump on a wide array of BMW Motorrad products has prompted the National Highway Traffic Safety Administration to issue a recall for over 50,000 of the Bavarian two-wheelers across America.
The issue revolves around the fuel pump flange on R-model, K-model, S 1000 and HP2 motorcycles built as far back, in some cases, to 2005 and as recent as 2012, depending on the model. The flange was found to be prone to crack and leak fuel, which NHTSA evaluated as a fire risk. As a result, precisely 50,184 such motorbikes are being recalled to have their flanges reinforced or, where necessary, to replace the entire fuel pump. If you're the owner of such a Bimmer bike, expect a call from your dealer sometime next month, but you can read the full notice below.

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.