2003 Bmw 530i Automatic -- Cold Weather Package - Very Clean - One Owner -- Lqqk on 2040-cars

Auto blog

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.

Consumer Reports criticizes small turbo engines for misleading performance, fuel economy claims [w/video]

Consumer Reports has taken aim at at small-displacement, forced-induction engines, saying the powerplants don't manage to deliver on automaker fuel economy claims. Manufacturers have long held that smaller, turbocharged engines pack all power of their larger displacement cousins with significantly better fuel economy, but the research organization says that despite scoring high EPA economy numbers, the engines are no better than conventional drivetrains in both categories. Jake Fisher, director of automotive testing for Consumer Reports, says the forced induction options "are often slower and less fuel efficient than larger four and six-cylinder engines."
Specifically, CR calls out the new Ford Fusion equipped with the automaker's Ecoboost 1.6-liter four-cylinder engine. The institute's researchers found the engine, which is a $795 option over the base 2.5-liter four-cylinder, fails to match competitors in acceleration and served up 25 miles per gallon in testing, putting the sedan dead last among other midsize options.
The Chevrolet Cruze, Hyundai Sonata Turbo and Ford Escape 2.0T all got dinged for the same troubles, though Consumer Reports has found the turbo 2.0-liter four-cylinder in the BMW 328i does deliver on its promises. You can check out the full press release below. You can also read the full study on the Consumer Reports site, or scroll down for a short video recap.

Giles Taylor succeeds Ian Cameron as head of Rolls-Royce design

Back in the day, a Rolls-Royce looked pretty much the same as a Bentley, but with a different grille. Once BMW took over Rolls-Royce, however, it was faced with the challenge of visually separating itself from its former sister brand. And most would agree that it did so pretty well. But its cars have looked pretty much the same ever since. What Rolls-Royce needs, then, is a bit of a design shake-up. And that's just what this latest appointment could bring.
After a baker's dozen years as design director at Rolls-Royce (and twenty years designing for the BMW Group altogether), Ian Cameron is retiring from his post. In his place, Rolls-Royce has named Giles Taylor as its new director of design. In his new capacity, Taylor will report directly to BMW Group chief designer Adrian van Hooydonk, and be responsible for all design matters related to the Rolls-Royce brand and its products.
Taylor was promoted to the role from his previous position as head of exterior design for the marque, a position he's held for barely more than a year. We'll be eagerly watching to see what the veteran British car designer has in store for the future of Rolls-Royce. In the meantime you can read the full announcement below.