2008(08)tt 2.0t Convertible Heat Sts Pwr Spoiler Cd Chgr Bose Pwr Sts Cruise on 2040-cars

Auto blog

Audi re-illuminates Sport Quattro with Laserlight concept for CES

Automakers typically spend months working on a concept car, then unveil it at a car show and move on to the next. But Audi has demonstrated a propensity at refining the same concepts and bringing them back for more. Just look at how many time Audi iterated its E-Tron concept, and how many diesel R8s it toyed with. It brought the Italdesign Parcour out of retirement and rechristened it the Audi Nanuk, and it's been doing the same with the Quattro concept for the past several years. The German automaker rolled out the first Quattro concept back in 2010, and followed up with the reborn Sport Quattro concept less than a year ago. And now it's preparing to unveil yet another.
Called the Sport Quattro Laserlight concept, this time it's not as radical a departure from the Sport Quattro concept as that was from the first Quattro concept. In fact, there's really only one vital difference. That'd be the laser headlights "that leave all previous systems in the dark," according to the press release below. The system uses matrix LEDs around the outside of the element as low beams, and lasers on the inside for high beams. Measured in mere microns, the laser diodes are significantly smaller than LEDs, while lighting up the road ahead for nearly half a kilometers (1,640 feet), providing twice the lighting range and three times the brightness of LED high beams.
Otherwise the concept car you see here and which Audi will display at the Consumer Electronics Show in Las Vegas next week is essentially the same as the one it showed in Frankfurt this past September. It's got the same measurements, wearing the same CFRP bodywork, with the same interior and the same 700-horsepower hybrid powertrain, only the yellow exterior has been repainted Plasma Red and the black interior redone in a more low-key Slate Grey, as you can see from the high-res image gallery above.

2014 Audi R8 V10 Plus

Ignore the naysayers who say the Audi R8 is too refined to be a proper supercar, or that it has begun to show its age - after a few tweaks for the 2014 model year, the automaker's flagship remains one of my favorite exotics.
Audi has treated all of its R8 models to a host of enhancements for the 2014 model year that include new LED headlights and tail lamps, larger steering wheel-mounted shift paddles, new exhaust finishes, updated alloy wheel designs and fresh exterior colors. However, the most significant news is the arrival of a proper seven-speed S-Tronic dual-clutch automatic transmission (it replaces the six-speed R-Tronic). The rapid-fire gearbox shaves a coupe tenths off the 0-60 sprint and improves fuel economy for both the eight- and ten-cylinder models (thankfully, a traditional six-speed manual is still on the order form).
I recently spent time with the new-for-2014 V10 Plus model, which is only available in a coupe body style. Compared to the standard V10 models, the Plus sheds upwards of 130 pounds thanks to lightweight manual seats (not fitted to my test car), carbon-ceramic brakes, reduced sound bay insulation, a smaller fuel tank and an assortment of carbon-fiber pieces (including side blades, front splitter, rear diffuser and spoiler). But that's not all, as the V10 Plus also receives a bump in output that pushes its ten-cylinder to an even 550 horsepower.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.