2004 Audi A6 on 2040-cars

Auto blog

2014 Audi S3 Cabriolet

Drivers are either droptop people or they're not. As most usually aren't - at least as far as the willingness to buy one is concerned - all convertibles tend to remain strictly niche cars. Thus, automakers must ask a noticeably higher price for them.
The Audi S3 Cabriolet is about as niche as you can get in the open daylight of mainstream automaking. Of course, the S3 cab doesn't really need to sell in big volumes; it exists because it's an easy and not too costly bit of flair for the company. In the US, this model would probably base out at around $44,000 if it were to join our fleet, which is problematic, as I'll soon explore.
In what may be a sign that Audi is essentially okay with all this, it had me up to central Sweden to twist around on the snow and ice in the open S3. The grounds ended up offering precious little ice and snow, so I drove the two-door ragtop on dusty, thawing Scandinavian roads. This was a blessing really, since ice driving in a cabrio - even a Quattro one - doesn't really reveal much of anything about such a car in its typical day-to-day life.

Audi builds its six-millionth Quattro-equipped car

All-wheel drive has become the norm particularly among German automakers. Mercedes offers its 4Matic system on a broad range of models, BMW counters with its xDrive system, Volkswagen has 4Motion, and the only Porsche you actually can't get with all-wheel traction is the Boxster/Cayman. But before all its competitors got on board with channeling power to all four wheels, Audi was making a name for itself with its Quattro all-wheel-drive system.
Now 34 years since the advent of the original Audi Quattro, the House of the Four Rings has built its six millionth vehicle equipped with all-wheel drive - only a year and a half since it hit the five-million mark. In fact these days nearly half of all new Audis are ordered in Quattro spec - more than any other automaker - resulting in a total of 710,095 Quattro-equipped Audis produced last year alone.
The landmark 6,000,000th vehicle was an SQ5 in monsoon gray metallic that rolled off the assembly line on Friday and is bound for a customer right here in the United States.

Audi Airomorph is a sleek shape-shifting senior thesis

Eric Kim just graduated from the from the Art Center College of Design in Pasadena, CA, at the end of the spring 2014 semester, and for his senior thesis project he came up with this futuristic Audi endurance racer called the Airomorph. He even got some input Audi designer Kris Vancoppenolle.
The Airomorph imagines a future Audi racer for Le Mans that features adjusting fabric panels to fine-tune the car's aerodynamics as it laps the course - a technology inspired by catamaran racing. "I started from scratch and had the freedom to deliver and execute a white space design for the future," said Kim to Autoblog via email. It's also somewhat similar to the idea behind BMW Gina concept, although Kim says that wasn't an inspiration for his design. The body here is made from a single piece of a silver, expansion-resistant material stretched over a frame underneath. The fabric anchors at the wheels, front and rear section with movable cables, and hydraulic actuators pull the wires to shift the aero as needed.
The actual shape echoes Audi endurance racers from the past and present. In profile, you can easily see the current R18 with its arcing cockpit and fin down the rear. Of course, that's interpreted through a little bit of Blade Runner with the covered wheels sticking out from the body. The front shows the rectangular shapes from the earlier R15. There doesn't appear to be any way to actually see out of the vehicle, though.